Information
- Call John Pullen 229-869-2195
Operators Station:Cab Enclosure- Operators Station:A/C
- Operators Station:Hand Controls
- Operators Station:Air Ride Seat
- Operators Station:Hi-Flo
- Attachments:Aux Hydraulics
- Tracks:Wide Rubber Tracks
- Buckets:84" Bucket
- Call John Pullen @ 229-869-2195
Highlights
- $81,500.00
- Ag and Turf
- Pre-Owned
- G703511
- 2021
- John Deere
- 333G
- 1T0333GMAMF393908
- Model: 4TNV94FHT
- 688
- Available
- No Bucket: 80.7 inches (2050 mm)
- Top Of Cab: 86.7 inches (2200 mm) | To Hinge Pin: 132 inches (3350 mm) | Dump - Maximum Foundry: 106.1 inches (2690 mm)
Specifications
- 2021
- John Deere
- 333G
- Base
- General
- Model: 4TNV94FHT
- Yanmar
- Rating: Tier 4
- Turbo. intercooled
- 186.3 Inches³ (3.1 ltr)
- 2500 rpm
- Output - Net: 96.6 hp (72 kW) | Output - Gross: 100 hp (74.6 kW) | Hydraulic: 50 hp (37.29 kW) | Hydraulic - Option: 82.1 hp (61.234 kW)
- 291.3 lbf / ft (395 Nm)
- Rated Operating Capacity - Foundry: 3700 lbs (1680 kg) | Tipping Load - Foundry: 10570 lbs (4799 kg) | Breakout - Lift: 8520 lbf (37.8 kN) | Breakout - Bucket: 13904 lbf (61.8 kN)
- Maximum: 7.8 mph (12.6 kph)
- Pump: 25 gallons US / min (95 lt/min) | Pump - Option: 41.1 gallons US / min (156 lt/min)
- Ground Bearing Foundry: 5 Psi (34.1 kPa) | System: 3450 Psi (237.87 bar)
- Rear Departure Angle: 31 Degrees | Dump Angle: 48 Degrees | Rollback - Ground Level: 35 Degrees
- Shoe: 17.7 inches (450 mm)
- No Bucket: 122 inches (3100 mm) | With Bucket: 146 inches (3710 mm)
- No Bucket: 80.7 inches (2050 mm)
- Top Of Cab: 86.7 inches (2200 mm) | To Hinge Pin: 132 inches (3350 mm) | Dump - Maximum Foundry: 106.1 inches (2690 mm)
- 9.4 inches (240 mm)
- 63.1 inches (1600 mm)
- Tank: 30 gallons US (114 ltr)
- 12100 lbs (5493 kg)
- Lift Geometry: Vertical
