e23 Transmission 40K, 26 mph (40 km/h): 40 km/h at 1,683 rpm with group 47 tires, 40 km/h at 1,598 rpm with group 48 tires
Electronically controlled, high-pressure common-rail with electric fuel transfer pump (self priming) | Required: Ultralow sulfur diesel (B20 diesel compatible)
Available
Specifications
2018
John Deere
7210R
Base
Row Crop
Rated per 97/68/EC at 2,100 rpm: 210 hp (154.5 kW) | Max per 97/68/EC at 1,900 rpm: 231 hp (169.9 kW)
John Deere PowerTech PSS 6.8L Engine: B20
2,100 rpm
Diesel
in-line, 6; wet-sleeve with 4 valves-in-head
Dual turbochargers, variable geometry turbo with fixed geometry turbo in series
Dual stage
415 cu. in. (6.8 L)
17.2:1
Full-pressure, full-flow filtration with bypass
Spin-on canister
4.19 in. (106 mm)
5 in. (127 mm)
Filter: Two-stage with water separator and service-indicator light | Filter, primary: 10 micron replaceable cartridge with water indication sensor and drain | Filter, secondary: 2 micron spin-on element
Electronically controlled, high-pressure common-rail with electric fuel transfer pump (self priming) | Required: Ultralow sulfur diesel (B20 diesel compatible)
PTO: 40%
at 2100 erpm: 170 hp (126.8 kW) | At Engine rpm (Rear): 540/1,000 at 1,950 engine rpm: 540E/1,000E PTO at 1,750 engine rpm | At Engine RPM (front) (1:2 Ratio): 1,000 PTO rpm at 1,940E rpm
power bulge: 10%
e23 Transmission 40K, 26 mph (40 km/h): 40 km/h at 1,683 rpm with group 47 tires, 40 km/h at 1,598 rpm with group 48 tires
Closed-center, pressure and flow compensated | Selective control valves (SCVs): 3, 4 Standard, 5 and 6 Available
Main, axial piston (displacement): 63 cc standard
2,958.1 psi (20 400 kPa) +/- 4.4 psi (300 kPa)
Rated: 45 cc pump: 32 U.S. gpm (121.1 L/min) | 63 cc pump: 43 U.S. gpm (162 L/min) | 85 cc pump: 59 U.S. gpm (223.3 L/min)
/Battery: 200 amps/12 Volt
Two batteries in parallel | Total cold-cranking amps: 1850 (2-925CCA grp 31 batteries)
Tires Group 47/48 tires available as Singles/Duals
front: 1150 Series MFWD, tread range 60 to 88 in. (1524 to 2235 mm)
MFWD/TLS: 115.2 in. (2925 mm) | MFWD / TLS axle clearance - 1300 axle, G43 420/85R34 tires: 19.5 in. (495mm)
Hydrostatic power: Load Sensing, Hydrostatic, Flow Metering with a 406mm diameter steering wheel
3 points Rear: Electrohydraulic sensing Category 3/3N with Quik-Coupler: 12,000 lb. (5,443 kg) 7,300 kg max lift | Front: Category 3N, available Premium Front Hitch for use with ground-engaging front implements: 11,464 lb. (5200 kg)
Category 3, 4,050 lb. (1837 kg) - 6,000 lb. (2700 kg) maximum vertical load dependent on drawbar position
DEF: 23L (6 gal)
MFWD: 23,175 lb (10,512 kg) | TLS: 25,521 lb (11,576 kg)
AutoTrac Ready | Service ADVISOR™ Remote: Capable with JDLink™ Select & Ultimate | CommandCenter™ 7-inch Display video with 4100 Processor: Video capable; single video input (Tyco Connector PN 776536-1) for camera with PAL or NTSC signal (camera and extension harness available through John Deere Parts