2020 Amadas Industries Long Reach Mower LRM6019

Information

2020 Amadas Industries Long Reach Mower LRM6019

The Amadas Long Reach Mower sets new standards for maintaining wood lines, ditch banks, and other hard to reach areas. You can cut grass, weeds, brush, tree limbs, and small trees up to 5-1/2” in diameter. With over 19’ of reach both horizontally and vertically, plus the ability to reach over fences and down hillsides, you can virtually reach all of your problem mowing areas.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Amadas Industries
  • Long Reach Mower LRM6019
  • Available
  • Folded up: 9 ft 5/8" (108 5/8")
  • Folded up: 10 ft (119 11/16")

Specifications

  • 2020
  • Amadas Industries
  • Long Reach Mower
  • LRM6019
  • Rotary Cutters
  • Tractor requirements: 150 HP min
  • 3.8 cu. in/rev
  • 850 RPM
  • @ 850 PTO: 1428 RPM @ 100% eff. 1214 RPM @ 85% eff
  • 6.38 cu. in/rev
  • Of pump @ 850 PTO speed: 23.5 GPM @ 100% eff. 20.0 GPM @ 85% eff. | Tractor hydraulic requirements: 15 GPM pump minimum
  • CAT II standard CAT III or CAT IIIN Quick Hitch
  • Main boom: 5" x 5” x 3/8" tubing with plated ends | Secondary Boom: 5" x 5" x 3/8" tubing with plated ends | Max vertical reach from center of pump: 18' (216") to center of mower deck | Blades (as a pair): 5/8" thick 5" offset (std)
  • Mower: 2 3/4", 4142 steel, with 2 3/4" tapered bearings
  • 5' (60")
  • Folded up: 10 ft (119 11/16")
  • Folded up: 9 ft 5/8" (108 5/8")
  • 50 gals of single viscosity, 10W API service CD/SE, hydraulic oil
  • Required tractor: 7000 lbs min (as rated by ASABE standards )
  • Of standard mower (less ballast): 4100 lbs with hydraulic oil | Total of standard mower with ballast: 6000 lbs
  • Debris: 3/8" thick, layered rubber belting | Skid shoe: 7 gauge steel | Pivoting forward cutting shield: 1/2" plate steel, reinforced with 3/4" round steel
  • 7 gauge, reinforced by plate and tubing