2024 Frontier Wood Chippers WC1205

Information

2024 Frontier Wood Chippers WC1205

Features may include:

Adjustable discharge chute accurately discharges to desired location

The discharge chute rotates 360 degrees for fast and easy positioning.

The chute also features an adjustable deflector to accurately direct the wood chips to the desired location.

Hydraulic feedroll mounted on spring-loaded frame

The hydraulic feedroll is mounted on a spring-loaded frame on the WC12 Series Wood Chippers, allowing it to raise up and down depending on the size of the timber going through.

The speed of the feedroll can be adjusted on the side of the wood chipper with the hydraulic flow valve.

Reversible feedroll has three positions that are easy to adjust on the feed box

Engagement of the feedroll is done by pushing or pulling the handle that wraps around the outside of the feed box. The feedroll has three positions: neutral, reverse, feed (forward).

The feedroll grabs the material as it is fed into the chipper and allows the operator to step away while it automatically pulls material into the knives.

Photos

Highlights

  • Albany, Georgia
  • 2024
  • Frontier
  • Wood Chippers WC1205
  • Available

Specifications

  • 2024
  • Frontier
  • Wood Chippers
  • WC1205
  • Brush
  • 56-86 kW (75-115 hp) | 540 rpm
  • Belt: Number - Five / Type - B-7 banded belt
  • Rotor: 2050 rpm
  • Requirements: 30.3 L/min (8 gpm)
  • 3-Point hitch: Pull-type
  • Chip opening: 229x406 mm (9x16 in.) | Hopper opening: 711x1067 mm (28x42 in.) | Feed_x001A_roller diameter: 393.7 mm (15.5 in.) | Chip chute: Rotation - 360 degree (angle) | Knife size: 1.59x11.43x22.86 mm (0.625x4.5x9 in.) | Knife bolt: Gr 8 hex head bolts: 15.9 mm (0.625 in.)
  • 68.6 cm (27.5 in.)
  • Unit: 1161.2 kg (2560 lb) | Rotor: 222.3 kg (490 lb)
  • Feed options: System - Hydraulic | Rotor style: Drum
  • A8 Hardened Anvil
  • Two
  • 1 year