2024 John Deere FC Series FC20R

Information

2024 John Deere FC Series FC20R

Flex Wing Rotary Cutter

20 ft. cutting width

540 or 1000 PTO RPM

4-inch cutting capacity

Rear wheel torsional suspension

Features may include:

  • What is the best cutter for your job?
  • Safety
  • Warranty
  • Maintenance

Photos

Highlights

  • Albany, Georgia
  • 2024
  • John Deere
  • FC Series FC20R
  • Available
  • 4 in. (102 mm)
  • Cutting: 1-16 in. (25.4-406.4 mm)

Specifications

  • 2024
  • John Deere
  • FC Series
  • FC20R
  • General
  • Transfer Continuous: 250 hp (186 kW) | Peak: 300 hp (224 kW) | Center Continuous: 125 hp (93 kW) / Peak: 168 kW (225 hp) | Outer Continuous: 125 hp (93 kW) / Peak: 225 hp (168 kW)
  • Tractor PTO HP range: 75 hp (56 kW) | 540 or 1,000 rpm
  • Size - Main: CV ASAE Category 6, splined telescoping profiles / Connecting: ASAE Category 5, splined telescoping profiles | Protection: No-seize, slip-clutch driveline
  • Five years
  • Torsional suspension
  • 5-bolt, laminated: 21x5.25x9 / 5-bolt, 24PR severe-duty ag: 26x9x14.5 / 5-bolt, 24PR severe-duty ag foam filled: 26x9x14.5
  • Blade tip 540 rpm: 268.1 fps (81.7 m/s) / 1000 rpm: 272.4 fps (83 m/s)
  • Standard self-level hitch clevis with 22.5-in. (57.2-cm) narrow-profile width | Jackstand: Mechanical jack stand in base for all machines with hydraulically operated height, stays vertical while raising/lowering
  • 7 gauge - 0.18 in. (4.55 mm)
  • Cutting capacity (diameter): 4 in. (101.6 mm) | Side skirt: 3 gauge - 0.24 in. (6 mm) | blade Thickness: 0.5 in. (13 mm) | blade Overlap: 6 in. (152 mm) | Wing flex For transport: upward 90 degree (angle) / Working angles: upward 45 degree (angle) / downward 22 degree (angle)
  • 20 ft (6.1 m)
  • 11.1 ft (3.4 m) at wing wheels
  • Cutting: 1-16 in. (25.4-406.4 mm)
  • Cutting chamber: 10 in. (254 mm)
  • 20.3 ft (6.2 m)
  • 17.3 ft (5.3 m)
  • 4 in. (102 mm)
  • Approx: 7643 lb (3466 kg)
  • Deck shape: Easy-clean smooth top deck | Deck type: Single | Hinges: Intermittent cast steel segments - greaseable single 2.5-cm (1-in.) diameter full-length hinge pin | Gearcases Number: 4 | blade Type: Suction | Blade holder type: Round stump jumper for maximum protection for blade carrier against obstruction damage | Wing lift: Simultaneous | Shielding front: Single-row chain guard / rear: Single-row chain guard
  • Wing-leveling: Easy adjust turnbuckle with bearing
  • Gearboxes: 5-year warranty