Electronic population rate control saves seed costs
With seed prices on the rise, producers want the ability to monitor and control seed populations on the go.
Electronic population rate control (EPRC), in base equipment on the 1590 Drill, allows producers to adjust the population rate right from the convenience of their tractor cab.
The system:
Features an in-cab rocker switch to adjust the electric motor that controls the population rate
Is manually adjusted – the operator must hold down the adjustment switch until the desired rate is met
Can be overridden by pushing back on the motor to allow the producer to make a manual adjustment to the rate if needed
Productive seedbox capacities
Seedboxes have large capacity for longer intervals between stops for refilling.
Plain grain or combination grain/fertilizer seedboxes are available to match the producer's needs and crops.
The versatile grain/fertilizer box with 19-mm (7.5-in.) row spacing can be set for 100 percent grain or 60 percent grain/40 percent fertilizer.
The bulkheads in the seedbox reduce material shifting in the box for increased seeding efficiency.
The sight glass located near the end of the box on combination grain fertilizer drills allows the operator to view seed level at a glance.
1590 Drill seed/fertilizer delivery system
A long, internally smooth seed tube with a molded elbow is supported at the seed tube support. From there, it is connected to a short convoluted seed tube, allowing product to flow smoothly to the openers and still flex.
The tube flexes to avoid crimping for consistent seed flow. It is made of non-corrosive nylon material for long life. Long tubes are 55.4 cm (21.8 in.) and short tubes are 10.8 cm (4.25 in.).
Elbow at meters to angle the seed tube directly to the openers.
The smooth inside diameter provides smooth seed flow from the meters to the furrow openers.
The combination grain/fertilizer drill with 19-cm (7.5-in.) row spacing features a convoluted tube directing fertilizer from the discharge hole to the top of the steel seed tube at the seed boot. From there, a special Y-adapter lets seed and fertilizer mix before going into the furrow.
Proven no-till openers provide excellent penetration with rugged durability
ProSeries single-disk no-till openers are included in base equipment. The single-disk openers are mounted on one rank on the 38.1-cm (15-in.) row spacing single rank units and on two ranks on the 19-cm (7.5-in.) and 25.4-cm (10-in.) row-spacing units. The single-disk openers provide consistent and accurate seed placement.
The single-disk openers are gang mounted and are hydraulically raised and lowered. The hydraulics also work to provide a wide range of downforce settings for the openers.
The active hydraulics work in conjunction with the opener spring to provide an adjustable range of 74.8 kg to 181.4 kg (165 lb to 400 lb) of down pressure per opener to penetrate hard soils and heavy residue.
The down pressure is easily adjusted with the pressure valve located on the front of the mainframe, giving the operator the ability to quickly adjust, or dial in, the down pressure as operating conditions change.
Photos
Highlights
Albany, Georgia
2024
John Deere
Box Drills 1590
Available
Specifications
2024
John Deere
Box Drills
1590
Seed Drill
Gauge: 4.5 x 16 in. (11.4 x 40.6 cm) | Press: 1 x 10 in. (2.54 x 25.4 cm) | Closing: 1 x 12 in. (2.54 x 30.5 cm)
Electrical requirements: Seven-pin connection
Active hydraulic down pressure per opener: 165 to 450 lb (75 to 204 kg)
One selective control valve (SCV)
Opener assembly: 7.5/15/20 in. (19.1/38.1/50.8 cm) | Clearance Road opener: 8 in. (20.3 cm) | Disk At a 7-degree angle: 18 in. (45.7 cm)
15 ft (4.57 m)
With wheels: 20 ft (61 m)
15.25 ft, in. (4.65 m)
6.83 ft, in. (2.08 m)
Meters type: Fluted-feed | Number of openers: 18 or 24
Total empty: 8460 lb (3837.4 kg) | Hitch empty: 3100 lb (1406.1 kg) | Hitch full: 4500 lb (2041.2 kg)