2024 John Deere 2100 Minimum-Till Base
- Year 2024
- Make John Deere
- Model 2100 Minimum-Till
2024 John Deere 2100 Minimum-Till Base
2024 John Deere 2100 Minimum-Till
Minimum Till RipperVariety of working widths available
Mainframe extensions
Setback brackets for staggered standard pattern
3/4-in. straight shear-bolt standard minimizes soil and residue disturbance
Features may include:
19-mm (0.75-in.) straight shear-bolt standard minimizes soil and residue disturbance at the surface- Equipped with replaceable wear shins to control wear on the leading edge of the shank that greatly extends the life of the standard, unlike some of the competitive models
- Can only be equipped with 64-mm, 178-mm, or 254-mm (2.5-in., 7-in., or 10-in.) minimum-till ripper points
- he frame is constructed with a 102-mm x 152-mm x 10-mm (4-in. x 6-in. x 0.375-in.) cross tube on three-, four-, five-, and seven-standard machines and 152-mm x 152-mm x 10-mm (6-in. x 6-in. x 0.375-in.) cross tube on nine-standard models where the hitch-mounting components are welded for maximum strength.
- Truss tubes connect the cross tubes and are constructed with 127-mm x 127-mm x 13-mm (5-in. x 5-in. x 0.5-in.) steel tubing.
- Welded together into one assembly, the frame is designed to handle the most severe operating conditions.
- A drawn hitch option is available for those who want to use large row-crop tractors or four-wheel drive (4WD) tractors without a 3-point hitch.
- The drawn hitch is only compatible with seven-standard and nine-standard 762-mm (30-in.) models. The drawn hitch is also available as an attachment for field conversion.
- The transport wheels are placed in front of the front rank of the mainframe. This allows residue to flow freely and keeps the wheels close to the standards to allow the ripper to follow the ground contour.
Engine
Engine Power
30-40 hp (22.3-29.8 kW)
Wheels & Tires
Wheels
Two adjustable wheels on 3-, 4-, 5- and 7-standard sizes. Four adjustable wheels on 9-standard integral only. | Stabilizer wheels / 20.5x8 in. (52.1x20.3 cm)
Tires, Rear Specification
10 PR | 12.5L-15 tires for 9-standard pull-type; 11L-15 tires for 7-standard, pull-type; 9-standard has 8-bolt hubs and spindles
Operational
Operating Speed
Miles per hour: 4-5 mph (6.4-8 km/h)
Operating Conditions
Trip force Shear bolt: 7,200 lb (3,265.9 kg) / 3,200 lb (1,451.5 kg) | Pounds of force Normal working load: 600 lb (272.2 kg) | Maximum trip load: 800 lb (362.9 kg) | Down force: 250 lb (113.4 kg)
Hydraulics
Hydraulic Type
1 SCV (lift)
Maximum Pressure
2500 psi (17,237 kPa)
Chassis
Hitch/Type
Category 2, Category 3 and 3N (with Quik-Coupler)
Dimensions
Dimensions
Spacings: 30 in. (76.2 cm) / 36 in. (91.4 cm) | frame size: 6x6x0.35 in. (102x152x0.9.5 mm) / 9 standard: 6x6x0.35 in. (152x152x9.5 mm) | Maximum underframe clearance: 35 in. (89 cm) | Standard type: 0.75 in. (19 mm) / or 1.25 in. (31.75 mm) | Standard: 19 mm (0.75 in.), min-till point: 178 mm (7 in.), low-disturbance: 254 mm (10 in.), ultra-low-disturbance: 63 mm (2.5 in.) / Standard: 31.75 mm (1.25 in.), Regular: 57 mm (2.25 in.), Capped: 57 mm (2.25 in.), Double-capped: 57 mm (2.25 in.) | Deflection of: 4 in. (10.2 cm) | blades Straight or rippled: 22x0.177 in. (559x4.5 mm) | wheel size: 4x16 in. (10.2x40.6 cm) | wheel spacing: 7.5 to 14 in. (19.05 to 35.6 cm) | Angle adjustments: 0 to 15 degree (angle)
Width, Working Position
7.5 ft (2.3 m) / 9 ft (2.7 m) / 10 ft (3.05 m) / 12.5 ft (3.8 m) / 15 ft (4.6 m) / 17.5 ft (5.3 m) / 22.5 ft (6.8 m)
Transport Width
10 ft (3.05 m) / 13.5 ft (4.1 m) / 16.5 ft (5 m) / 22 ft (6.7 m) / 15.5 ft (4.7 m)
Depth, Maximum
Operating: 16 in. (40.6 cm)
Height
Trip height 12 in. (30.5 cm)
Features
Features
Tool configuration type: In-line ripper | Depth control: 3-point hitch for integral / Single point for pull-type | Coulters type: Spring cushion coulters