2024 John Deere 2720 Base

Information

2024 John Deere 2720

Disk Ripper

Bury residue to 15-in. (38.1 cm) depths

Improved residue flow in wet conditions

The most level soil profile from a ripper

Exclusive hydraulic rolling basket option

Features may include:

TruSet™ Tillage and single-point depth control
  • In just six seconds, 2720 Disk Ripper operators can manage their changing field conditions such as running deeper over end rows or shallower on hilltops and lighter soils by making on-the-go adjustments for the entire implement from the tractor cab. TruSet enables users to adjust depth for the rippers and adjust the pressure on the active hydraulic rolling baskets – all while covering acres.
  • Getting the best field performance is easier with TruSet hydraulic stabilizer wheels. Choose TruSet hydraulic stabilizer wheels as an option on the 6.86-m (22.5-ft) nine-standard model or 8.38-m (27.5-ft) 11-standard model. The mechanical stabilizer wheels can be manually adjusted with a turnbuckle. TruSet enables operators to control the TruSet hydraulic stabilizer wheels from the cab while on the go. It requires TruSet depth and pressure control.
Internal basket scrapers
  • The internal basket scraper allows for a uniform field finish in wet conditions because the baskets do not need to be raised out of ground to avoid plugging and can stay in the ground 100 percent of the time.
Typical percentages of residue cover remaining
  • Typical percentages of residue cover remaining from the 2720 Combination Ripper are listed in the table. These percentages do not consider variables such as the conditions of the residue, speed, and soil type.
  • The 2720 Ripper offers increased weight per blade over the 512 Ripper to penetrate rock-hard soils and deliver up to 203.2 mm (8 in.) of blade working depth to bury residue. The chart below details the weight per blade of the 2720 with and without a basket versus the 512.

Photos

Highlights

  • Albany, Georgia
  • 2024
  • John Deere
  • 2720 Base
  • Available
  • Trip Shear bolt protected above: 13 in. (33 cm)

Specifications

  • 2024
  • John Deere
  • 2720
  • Base
  • Disc
  • 41-47 hp (66-75.6 kW)
  • (4)11L-15 FI D LR tires / (4)340/65R18 Goodyear® tires / (4)340/65R18 Michelin® tires
  • Walk-Over tandem wheels, 57.2-mm (2.25-in.) diameter plug-in spindles and bolt hubs
  • 5-7 mph (8-11.3 km/h)
  • Cushion-trip standard: 4,100 lb (1,859.7 kg)
  • 2 SCVs / 3 SCVs
  • 2,500 psi (17,237 kPa)
  • Single hitch tube: 6x10 in. (15.2x25.4 cm)
  • Spacing: 30 in. (76.2 cm) | Transport clearance: 10 in. (25.4 cm) | Underframe clearance Maximum: 37.5 in. (95.25 cm) | Wingless, LaserRip™ II points: 5 in. (12.7 cm) / 7 in. (17.8 cm) / 10 in. (25.4 cm) | Solid spherical low-concavity disk blades: 24x0.256 in. (610x6.5 mm) | Blade spacing: 11 in. (27.9 cm) | front frame Fixed: 18 degree (angle) / rear: 14-16 degree (angle)
  • 12.5-27.5 ft (3.8-8.4 m)
  • With furrow filler attachment: 16.9-18.4 ft (5.2-5.6 m)
  • Operating: 16 in. (40.6 cm) / Mulching disk: 6 in. (15.2 cm)
  • Trip Shear bolt protected above: 13 in. (33 cm)
  • Depth control: Single-point crank / TruSet™ tillage | Parabolic with or without wear shins, straight with wear shins | Type of standard: C-spring | Bearings: Sealed, maintenance-free
  • Fore-aft adjustment: Hitch turnbuckle