2024 John Deere Q800M Series Q820M

Information

2024 John Deere Q800M Series Q820M

QuikTrak™ Stand-On Mower

23.5-hp (17.5-kW)

48”, 54”, and 60” 7Iron™ PRO decks

Mow up to 16 km/h

Warranty: 36 months or 1200 hours, whichever comes first; First 24 months, no hour limitation

Features may include:

  • Commercial-quality engine is reliable and provides excellent performance and life
  • Durability and mowing performance from 7Iron™ PRO Mower Decks forged from a single piece of steel
  • Spacious operator platform gives operators room to move
  • Get operators up to speed with user-friendly controls
  • Exclusive three-year, bumper-to-bumper warranty is standard with a QuikTrak™ Mower

Photos

Highlights

  • Albany, Georgia
  • 2024
  • John Deere
  • Q800M Series Q820M
  • Tuff Torq TZT13 IHT
  • Available
  • With chute down: 62, 68, 74 in(157, 173, 188 cm)
  • 48 in (122 cm) | of cut range: Increments 0.25 in - 1.5-5 in (0.64 cm - 3.8-12.7 cm)

Specifications

  • 2024
  • John Deere
  • Q800M Series
  • Q820M
  • Stand-On
  • Model: FX730V
  • Gross at 3,600 rpm: 23.5 hp (17.5 kW)
  • 44.3 cu in.(726 cc ) | Hydraulic pump: 0.79 cu in (13 cc) | Wheel motors: 13 cu in (213 cc)
  • Electro-magnetic with brake 169 Nm (125 lb-ft) (48 in.) | Electro-magnetic with brake 271 Nm (200 lb-ft) (54 in., 60in)
  • Two, V-twin
  • Forced air, with integrated clean out ports
  • Heavy-duty canister type with safety element
  • Gasoline
  • Tuff Torq TZT13 IHT
  • Dual hand-controlled levers
  • Internal wet disk | Hand lever
  • 48 in. (22x10-12 pneumatic) 54 in., 60 in. (22x12-12 pneumatic ) 22x11N12 Tweel | Caster: 13x5-6
  • Charge system: At 3,600 rpm 20A | Battery voltage: 12 V | Cold cranking amp: 300 CCA
  • Blade tip speed Approximately: 18,000 fpm (5486 m/min) | Speed range: 0-10 mph (0-16.1 km/h) | Forward Infinite: 0-10 mph (0-16.1 km/h) | Reverse Infinite: 0-5 mph (0-8.0 km/h)
  • Full flow, replaceable
  • Full pressure
  • Mower deck size: 48-in (122-cm) / 54-in (137-cm) / 60-in (152-cm) | hydraulic air cooler: Two 22 cm (8.5 in.) fans | Blade thickness: 0.25 in (0.64 cm)
  • 54-in. (137-cm) 7Iron™ PRO side-discharge | 60-in (152-cm) 7Iron™ PRO side-discharge
  • With chute down: 62, 68, 74 in(157, 173, 188 cm)
  • Foot platform up 67.25 in (171 cm) / Foot platform down 72 in (183 cm)
  • 48 in (122 cm) | of cut range: Increments 0.25 in - 1.5-5 in (0.64 cm - 3.8-12.7 cm)
  • 7 gauge: 0.180 in (4.6 mm)
  • 12 U.S. gal (45.3 L)
  • 6.0 U.S qt (5.7 L)
  • Speed and direction control Twin hand-controlled levers
  • 48 in. (474 kg 1045 lb) / 485 kg (1070 lb) (54 in.) / 497 kg (1095 lb) (60 in.)
  • 36 months or 1500 hours, whichever comes first. First 24 months, no hour limitation.