2024 John Deere M Series Z920M 60 in

Information

2024 John Deere M Series Z920M 60 in

Features may include:

Powerful 23.5-hp (17.5-kW) commercial-grade engine delivers class-leading performance and efficiency
  • Overhead valve design
  • More horsepower and torque per cubic inch of displacement
  • Better fuel efficiency
Available Mulch On Demand™ deck
  • Deck is stamped from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside, with fewer sharp corners, for reduced material buildup.
  • Significantly fewer welds on the deck shell to wear or break- it is stamped from a single sheet of steel rather than multiple fabrications. Anti-skid step on the deck provides for easy machine mounting.
  • Mulch On Demand decks are superior to aftermarket chute blockers due to the movable baffles.
  • Three-year, bumper-to-bumper warranty
  • An exclusive 2-year, unlimited hour/3-year, 1200-hour (whichever comes first) bumper-to-bumper warranty is standard for all John Deere E and M Series Mowers. The warranty is best in its class and places John Deere at the forefront of commercial mowing. It is also hassle free, with one company handling all of the paperwork.

Photos

Highlights

  • Albany, Georgia
  • 2024
  • John Deere
  • M Series Z920M 60 in
  • Hydrostatic
  • Gasoline
  • Available
  • With chute down: 62, 68, 74 in (157, 173, 188 cm)
  • With ROPS up: 73 in (185 cm) | With ROPS down: 47 in (119 cm) | Of-cut range: Increments: 0.25 in (0.64 cm) / 1-5.5 in (2.54-14 cm)

Specifications

  • 2024
  • John Deere
  • M Series
  • Z920M 60 in
  • Zero-Turn Mower
  • FX730V
  • 23.5 hp (17.5 kW)
  • Gross at 3,600 rpm
  • Two
  • 44.3 cu in (726 cc)
  • Full pressure
  • Air
  • Pre-cleaner Yes Heavy-duty canister type with safety element
  • Operator presence starting system: Brake-N-Go (hand)
  • Gasoline
  • Drive: V-belt | Electro-magnetic, 200 lb-ft (271 Nm)
  • Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor | Speed and direction control: Twin levers
  • Hydrostatic
  • Dynamic braking: Twin levers | Park brake: Internal wet disk integrated in the transmission | Park brake actuation: Hand brake
  • Caster wheel type: Flat free | Drive wheels: 24x12-12 | Caster wheels: 13x6.5-6
  • Anti-scalp rollers: RH, center, LH
  • Anti-scalp rollers: Standard
  • 24x12-12 | Load rating: 4 PR
  • 12 V
  • Cold cranking amp: 300 amp | Hour meter: Standard, digital
  • 20 amp
  • Consumption: 1.1-1.9 U.S. gal./hr (4.2-7.2 L/hr)
  • Blade tip speed: 7Iron PRO: Approximately 18,500 fpm | Travel speed: Speed range: 0-10 mph (0-16.1 km/h) | Forward: 0-10 mph (0-16.1 km/h) | Reverse: 0-4.5 mph (0-7.2 km/h) | Blade tip speed: 7Iron PRO: Approximately 18,500 fpm | Speed range: 0-10 mph (0-16.1 km/h)
  • Full flow, replaceable
  • Mower deck size: 60-in. (152-cm) | Blades Thickness: 0.25 in (0.64 cm)
  • 60 in (152 cm )
  • 84 in (213 cm)
  • With chute down: 62, 68, 74 in (157, 173, 188 cm)
  • With ROPS up: 73 in (185 cm) | With ROPS down: 47 in (119 cm) | Of-cut range: Increments: 0.25 in (0.64 cm) / 1-5.5 in (2.54-14 cm)
  • 5.9 U.S. qt (5.6 L )
  • Tank: 11.5 U.S. gal. (43.5 L )
  • Blade Number: Three | Mower deck: 7Iron™ PRO side-discharge
  • 1,228 lb to 1,313 lb (557 kg to 596 kg)
  • 7-gauge: 0.179-in (4.6-mm) one-piece forged steel
  • 36 months or 1200 hours, whichever comes first First 24 months, no hour limitation