2024 John Deere M Series Z930M 60 in PRO Mulch

Information

2024 John Deere M Series Z930M 60 in PRO Mulch

Features may include:

Powerful 25.5-hp (19.0-kW) commercial-grade engine delivers class-leading performance and efficiency
  • Overhead valve design
  • More horsepower and torque per cubic inch of displacement
  • Better fuel efficiency
Available Mulch On Demand™ deck
  • Deck is stamped from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside, with fewer sharp corners, for reduced material buildup.
  • Significantly fewer welds on the deck shell to wear or break- it is stamped from a single sheet of steel rather than multiple fabrications. Anti-skid step on the deck provides for easy machine mounting.
  • Mulch On Demand decks are superior to aftermarket chute blockers due to the movable baffles.
  • Deluxe comfort seat with armrests
  • Deluxe comfort seat with armrests and isolation
  • Fully adjustable suspension seat with armrests

Photos

Highlights

  • Albany, Georgia
  • 2024
  • John Deere
  • M Series Z930M 60 in PRO Mulch
  • Hydrostatic
  • Gasoline
  • Available
  • With chute down: 68, 74 in (173, 188 cm) Rear discharge: 63.5 in (161.3 cm)
  • With ROPS up: 73 in (185 cm) With ROPS down: 47 in (119 cm) | Of-cut range: Increments: 0.25 in (0.64 cm) / 1-5.5 in (2.54-14 cm)

Specifications

  • 2024
  • John Deere
  • M Series
  • Z930M 60 in PRO Mulch
  • Zero-Turn Mower
  • FX801V
  • 25.5 hp (19 kW)
  • Gross at 3,600 rpm
  • Two
  • 52 cu in (852 cc)
  • Full pressure
  • Air
  • Pre-cleaner Yes Heavy-duty canister type with safety element
  • Operator presence starting system: Brake-N-Go (hand)
  • Gasoline
  • Drive: V-belt | Electro-magnetic: 225 lb-ft (305 Nm)
  • Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor | Speed and direction control: Twin levers
  • Hydrostatic
  • Dynamic braking: Twin levers | Park brake: Internal wet disk integrated in the transmission | Park brake actuation: Hand brake
  • Caster wheel type: Flat free | Drive wheels: 24x12-12 | Caster wheels: 13x6.5-6
  • Anti-scalp rollers: RH, center, LH
  • Anti-scalp rollers: Standard
  • 24x12-12 | Load rating: 4 PR
  • 12 V
  • Cold cranking amp: 300 amp | Hour meter: Standard, digital
  • 20 amp
  • Consumption: 1.1-1.9 U.S. gal./hr (4.2-7.2 L/hr )
  • Blade tip speed: 7Iron PRO: Approximately 18,500 fpm 152-cm (60-in.) FastBack: Approximately 16,500 fpm | Travel speed: Speed range: 0-10 mph (0-16.1 km/h) | Forward: 0-10 mph (0-16.1 km/h) | Reverse: 0-4.5 mph (0-7.2 km/h) | Blade tip speed: 7Iron PRO: Approximately 18,500 fpm | Speed range: 0-10 mph (0-16.1 km/h)
  • Full flow, replaceable
  • Mower deck size: 60-in (152-cm) | Blades Thickness: 0.25 in (0.64 cm)
  • 60 in (152 cm )
  • 84 in. (213 cm)
  • With chute down: 68, 74 in (173, 188 cm) Rear discharge: 63.5 in (161.3 cm)
  • With ROPS up: 73 in (185 cm) With ROPS down: 47 in (119 cm) | Of-cut range: Increments: 0.25 in (0.64 cm) / 1-5.5 in (2.54-14 cm)
  • 5.9 U.S. qt (5.6 L)
  • Tank: 11.5 U.S. gal (43.5 L)
  • Blade Number: Three | Mower deck: 7Iron™ PRO Mulch On Demand™
  • 1,296 lbs to 1,383 lb (588 kg to 627 kg)
  • 7-gauge: 0.179-in (4.6-mm) one-piece forged steel
  • 36 months or 1200 hours, whichever comes first First 24 months, no hour limitation