2024 John Deere R Series Zero Turn Mowers Z970R 60 in 7Iron™ PRO

Information

2024 John Deere R Series Zero Turn Mowers Z950R 72 in 7Iron™ PRO

Features may include:

Powerful 35.0-hp (26.1-kW) commercial-grade engine delivers class-leading performance and efficiency
  • Overhead valve design
  • More horsepower and torque per cubic inch of displacement
  • Better fuel efficiency
  • Deck is forged from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside with fewer sharp corners for reduced material buildup.
  • Significantly fewer welds on the deck shell to wear or break - it is forged from a single sheet of steel rather than multiple fabrications. An anti-skid step on the deck provides easy machine mounting.
  • Extra reliability and long life with cast-iron blade spindle housings.
  • Seat can travel up to 2 in. (50.8 mm) fore and aft to absorb bumps for a significant enhancement to ride comfort.
  • Control lever provides the ability to easily lock out fore/aft suspension movement if desired.

Photos

Highlights

  • Albany, Georgia
  • 2024
  • John Deere
  • R Series Zero Turn Mowers Z970R 60 in 7Iron™ PRO
  • Hydrostatic
  • Gasoline
  • Available
  • With chute down: 74, 86 in (188, 218 cm) | Rear discharge: 75.8 in. (192.5 cm)
  • With ROPS up: 73 in. (185 cm) / With ROPS down: 47 in. (119 cm) | Of-cut range: Increments 0.25 in. (0.64 cm) / 1-5.5 in (2.54-14 cm)

Specifications

  • 2024
  • John Deere
  • R Series Zero Turn Mowers
  • Z970R 60 in 7Iron™ PRO
  • Zero-Turn Mower
  • FX1000V
  • 35 hp (26.1 kW)
  • Gross at 3,600 rpm
  • Two
  • 61 cu in. (999 cc)
  • Full pressure
  • Air
  • Pre-cleaner Yes Heavy-duty canister type with safety element
  • Operator presence starting system: Brake-N-Go (foot)
  • Fuel tank switch/shut-off valve
  • Gasoline
  • Drive: V-belt | Electro-magnetic: 225 lb-ft (305 Nm)
  • Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor | Speed and direction control: Twin levers
  • Hydrostatic
  • Dynamic braking: Twin levers | Park brake: Internal wet disk integrated in the transmission | Park brake actuation: Foot brake
  • Caster wheel type: Flat free | Drive wheels: 24x12-12 | Caster wheels: 13x6.5-6
  • Anti-scalp rollers: RH, center, LH
  • Anti-scalp rollers: Standard
  • 24x12-12 | Load rating: 4 PR
  • 12 V
  • Cold cranking amp: 300 amp | Hour meter: Standard, digital
  • 20 amp
  • consumption: 1.1-1.9 U.S. gal./hr (4.2-7.2 L/hr)
  • Blade tip speed: Approximately 18,500 fpm | Speed range: 0-12 mph (0-19.3 km/h) | Forward: 0-12 mph (19.3 km/h) | Reverse: 0-4.5 mph (0-7.2 km/h )
  • Full flow, replaceable | Drivetrain: Internal, replaceable
  • Mower deck size: 60-in (152-cm) | Blades Thickness: 0.25 in (0.64 cm)
  • 60 in. (152 cm)
  • 84 in. (213 cm) (Varies by deck size)
  • With chute down: 74, 86 in (188, 218 cm) | Rear discharge: 75.8 in. (192.5 cm)
  • With ROPS up: 73 in. (185 cm) / With ROPS down: 47 in. (119 cm) | Of-cut range: Increments 0.25 in. (0.64 cm) / 1-5.5 in (2.54-14 cm)
  • 5.9 U.S. qt (5.6 L)
  • Tank: 11.5 U.S. gal. (43.5 L)
  • Blade Number: Three | Mower deck: 7Iron™ PRO side-discharge
  • 1,326 to 1,445 lb (601 to 655 kg)
  • 7-gauge: 0.179-in. (4.6-mm) one-piece forged steel
  • 36 months or 1500 hours, whichever comes first First 24 months, no hour limitation