2018 John Deere Engine & Drivetrains 4045TF280 51-63 kW Base

Information

2018 John Deere Engine & Drivetrains 4045TF280 51-63 kW

4.5L Generator Drive Engine

Emissions Certifications

  • CARB
  • EPA Tier 3

Features may include:

Jet fuel capable
  • The John Deere jet fuel capable engines run on military, arctic, and aviation fuel, including Jet A, Jet A-1, JP-5, and JP-8. If you need to switch back to diesel fuel, just fill up the tank and go
2-valve cylinder head
  • Cross-flow head design provides excellent breathing from a lower-cost 2-valve cylinder head
Mechanical rotary fuel pump
  • The timing and fuel injection pressures are optimized to maximize performance and fuel economy at a given rated speed
Fixed geometry turbocharger
  • Fixed geometry turbochargers are precisely matched to the power level and application
Turbocharged
  • In turbocharged engines, the air is pre-compressed. Due to the higher pressure, more air is supplied into the combustion chamber allowing a corresponding increase in fuel injection which results in greater engine output
Compact size
  • Mounting points are the same as Tier 2/Stage II engine models
Engine performance
  • Excellent block loading capability
Additional features
  • Self-adjusting poly-vee fan drive
  • Forged-steel connecting rods
  • Replaceable wet-type cylinder liners
  • Either-side service

Photos

Highlights

  • Albany, Georgia
  • 2018
  • John Deere Engine & Drivetrains
  • 4045TF280 51-63 kW Base
  • Model: 4045TF280
  • Efficiency: 88-92 % | Calculated generator set output - Prime: 43-51 kWe (54-64 kVa) | Calculated generator set output - Standby: 48-56 kWe (60-70 kVa)
  • 396 kg (873 lb)
  • Available
  • 612 mm (24.1 in)
  • 994 mm (39.1 in)

Specifications

  • 2018
  • John Deere Engine & Drivetrains
  • 4045TF280 51-63 kW
  • Base
  • General
  • Model: 4045TF280
  • 4
  • 4.5 L (275 cu in)
  • 106 mm (4.17 in)
  • 127 mm (5.00 in)
  • 19.0:1
  • In-line, 4-Cycle
  • Turbocharged
  • 60 Hz( 1800 rpm )
  • Prime: 51-57 kW (68-76 hp) | Standby: 56-63 kW (75-84 hp)
  • Efficiency: 88-92 % | Calculated generator set output - Prime: 43-51 kWe (54-64 kVa) | Calculated generator set output - Standby: 48-56 kWe (60-70 kVa)
  • Power Factor: 0.8 | Rated Fan Power: 1.9 kW (2.5 hp)
  • 860 mm (33.9 in)
  • 612 mm (24.1 in)
  • 994 mm (39.1 in)
  • 396 kg (873 lb)