2018 John Deere Engine & Drivetrains 6068SFM75 (249-400 hp) M3

Information

2018 John Deere Engine & Drivetrains 6068SFM75 (249-400 hp) M3

Marine Propulsion Engine

  • 6.8L PowerTech™
  • 186-298 kW (249-400 hp)

Features may include:

Watercooled turbocharger and exhaust manifold
  • Cooler and quieter environment for vessel and crew
Replaceable wet-type cylinder liners
  • Excellent heat dissipation
  • Hardened and precision machined for long life
  • Rebuild to original specifications
Corrosion resistant components
  • Provides engine protection from the effects of seawater
Corrosion resistant components
  • Provides engine protection from the effects of seawater
Heat exchanger
  • High-capacity heat exchanger designed for reliable operation in adverse conditions
High torque and low rated RPM
  • Excellent vessel control and maneuvering
  • Lower rated rpm limits vibration and noise for better crew comfort
Fuel system
  • Electronically controlled high pressure common rail resulting in excellent fuel economy and excellent performance
  • Self diagnostics and protection

Photos

Highlights

  • Albany, Georgia
  • 2018
  • John Deere Engine & Drivetrains
  • 6068SFM75 (249-400 hp) M3
  • Model: 6068SFM75
  • 890 kg (1962 lb)
  • Available
  • Maximum: 1122 mm (44.2 in)
  • 959 mm (37.8 in) | crankshaft centerline to top: 661 mm (26.0 in) | crankshaft centerline to bottom: 298 mm (11.7 in)

Specifications

  • 2018
  • John Deere Engine & Drivetrains
  • 6068SFM75 (249-400 hp)
  • M3
  • General
  • Model: 6068SFM75
  • 6
  • 6.8 L (415 cu in)
  • 106 mm (4.15 in)
  • 127 mm (5.00 in)
  • In-line, 4- Cycle
  • Air-to-sea water
  • 239 KW ( 321 bhp )
  • 60.1 L/hr ( 15.9 gal/hr)
  • 2600 rpm
  • Typical load factor: <=50% | annual usage: 000-4 hr | full-power operation: 4 of each 12 hr
  • 1380 mm (54.3 in)
  • Maximum: 1122 mm (44.2 in)
  • 959 mm (37.8 in) | crankshaft centerline to top: 661 mm (26.0 in) | crankshaft centerline to bottom: 298 mm (11.7 in)
  • 890 kg (1962 lb)