2024 Rhino Ag Equipment R Series R126

Information

2024 Rhino Ag Equipment R Series R126

Surprisingly agile. Unsurprisingly tough.

Keep your cuts level—even in hilly areas.

When your terrain’s got curves, you need a mower from RhinoAg’s R Series. The pivoting frame follows the contours of the ground, making it ideal for maintaining golf courses, parks, and more. Zero-turn capability means you can navigate with ease, and convertible blades give you the versatility you need for varying cut intensity.

The boron steel blades can be easily sharpened, meaning you’ll have a Rhino that lasts and lasts. Consistent stripes and an even clipping distribution result in a high-quality finish that’s bound to leave an impression.

Industry-leading toughness. Industry-leading warranty.

Rhino products are built to take on whatever you can throw at them. But if something should break, you’ll be glad to know our warranties are just as strong. See your local Rhino dealer for complete details.

Features may include:

  • 100% gear driven - no belts
  • Strenx® 700MC high-strength steel
  • Multi-pivoting frame with self-aligning spherical bearings to easily hug ground contours
  • Full-length rollers for satisfying stripes
  • Gearbox driveline and blade system
  • 76 m/s blade tip speed
  • Blade easily converts from rigid to swinging
  • Internal roller bearings for protection against moisture and soil
  • Fully-galvanized finish for added durability

Photos

Highlights

  • Albany, Georgia
  • 2024
  • Rhino Ag Equipment
  • R Series R126
  • Available
  • Cutting: Up to 4 1/2"

Specifications

  • 2024
  • Rhino Ag Equipment
  • R Series
  • R126
  • Flail Mowers
  • PTO Horsepower Required (Min): 40 HP | Tractor PTO: 540 RPM
  • Oil: 85W-140 Factory Filled
  • 1 3/8" 6-spline 2300 series wide angle shaft with slip clutch
  • BKT LG306 wheel 23x10.5, 12-ply rating
  • Mowing Rates: 10 acres/hr @7mph | Blade Tip Speed: 14,930 FPM
  • Pull-Type
  • Deck Thickness 8 Guage Strenx® 700MC folded monocoque construction with reinforcement and underside trough is 8 guage Strenx® 700MC
  • Output Shaft Diameter: 1 1/2" (40mm) | Blade Overlap: 4 1/4" | Blades: 3" x 1/4" | Blade Carrier: 3 1/4" x 3/8" spring steel, hardened and tempered
  • 12' 2"
  • 90"
  • 75"
  • 118"
  • Cutting: Up to 4 1/2"
  • 3,075 lbs
  • Rotars: 6 | No. of Blades: 24 | Blades: 3” x 3/16” spring steel ground edged parallel hardened and tempered, pivoting on high tensile pivot bush assembly