2020 Rhino Equipment Bulldozers RD13 Angle

Information

2020 Rhino Equipment Bulldozers RD13 Angle

Rhino® Dozers combine incredible versatility to handle a wide range of jobs with innovations that help you do those jobs better, faster and more efficiently. These crawler dozers are ideal for residential construction performing such tasks as clearing and grading lots, sloping the sides of roads, back-filling, and final grade work for landscaping and driveway construction.

The RD series has earned a reputation for best-in-class versatility, productivity and resale value. Because it excels across a wide range of jobs, customers choose the Rhino® Dozers for everything from dozing and ripping to scraper work and finish grading. The versatile Rhino® Dozer is a top choice for land clearing, highway and road construction, building oil/gas/wind farm pads and working landfills.

Features may include:

  • The RD series allows you to work hard and efficiently in all conditions. Repeatable fine modulation gives superior blade control for excellent material handling. RD Series electro-hydraulic implement controls and load-sensing hydraulic system with simultaneous lift and tilt capabilities offer better control with less effort.
  • Standard high-back seat and lower cushion adjust multiple ways for daylong comfort and support.
  • Easy-to-read, high-visibility gauges and warning lamps keep the operator aware of critical system information.
  • Speed travel can also be varied to fit specific applications, terrain conditions, or operating preferences.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Rhino Equipment
  • Bulldozers RD13 Angle
  • Model: LR6A3Z-20
  • Powershift, planetary gear and multiple disc clutch | System Pressure: 2 mpa (290 psi)
  • Available
  • Grouser: 500 mm (19.7 in) | Over Track: 2,200 mm (7.2 ft) | Blade: 3,450 mm (11.3 ft)
  • Top of Cab: 3,230 mm (10.6 ft) | Blade: 970 mm (3.2 ft)

Specifications

  • 2020
  • Rhino Equipment
  • Bulldozers
  • RD13 Angle
  • Crawler
  • Model: LR6A3Z-20
  • Rhino®
  • Tier 2
  • 6
  • 6.0 L (366 cu in)
  • Net Power 93 kW (125 Hp) @ 2,000 rpm
  • Net Peak Torque 410 Nm (302 lb-ft) @ 1,500 rpm
  • Turbocharged, charge air cooled
  • Under-hood, dual element dry type, restriction indicator on filter housing for service
  • Direct Injection
  • Powershift, planetary gear and multiple disc clutch | System Pressure: 2 mpa (290 psi)
  • Individual levers to control each track
  • Double reduction final drives mounted enclosed and isolated
  • Dynamic braking when decelerator pedal is actuated
  • Manually activated
  • Voltage: 24 Volts
  • 50A
  • Maximum Travel Speeds 1st Gear Forward: 2.4 km/h (1.5 mph) | Maximum Travel Speeds 1st Gear Reverse: 3.8 km/h (2.4 mph) | Maximum Travel Speeds 2nd Gear Forward: 5 km/h (3.1 mph) | Maximum Travel Speeds 2nd Gear Reverse 4.5 km/h (2.8 mph) | Maximum Travel Speeds 3rd Gear Forward: 7.6 km/h (4.7 mph) | Maximum Travel Speeds 3rd Gear Reverse : 5.3 km/h (3.3 mph) | Maximum Travel Speeds 4rd Gear Forward: 10.6 km/h (6.6 mph) | Maximum Travel Speeds 4th Gear Reverse : 6.6 km/h (4.1 mph) | Maximum Travel Speeds 5th Gear Reverse : 7.0 km/h (4.3 mph)
  • 51 Mpa (7,397 psi)
  • Gradeability: 20 degrees
  • Gear pump | Control: Lever control for blade with float mode; lever control for ripper
  • 20 mpa (2,901 psi)
  • Max. Flow: 80 L/min (21 gpm)
  • 2 Front lights, 2 Rear lights
  • Ground Contact Area: 25,500 cm2 (3,953 sq.in) | Blade Tilt: 430 mm (16.9 in) | Blade Angle: 45 degrees
  • Track: 1,700 mm (66.9 in)
  • Grouser: 500 mm (19.7 in) | Over Track: 2,200 mm (7.2 ft) | Blade: 3,450 mm (11.3 ft)
  • Track on Ground: 2,550 mm (100.4 in) | With Ripper: 5,635 mm (18.5 ft)
  • Top of Exhaust: 3,020 mm (9.9 ft)
  • Top of Cab: 3,230 mm (10.6 ft) | Blade: 970 mm (3.2 ft)
  • Blade: 900 mm (35.4 in)
  • 4,535 mm (14.9 ft)
  • Tread Depth with Single-Bar Grouser: 60 mm (2.4 in) | Blade Digging: 400 mm (15.7 in)
  • Dirt: 370 mm (14.6 in)
  • Blade Angle: 35 degrees
  • Pull Maximum: 115 kN (25,853 lb) | Pull At 2.0 km/h (1.2 mph): 66 kN (14,837 lb) | Pull At 6.0 km/h (3.7 mph): 40 kN (8,992 lb)
  • 290 L (77 gal)
  • 31 L (8 gal)
  • Engine: 20 L (5 gal)
  • 65 L (17 gal)
  • Hydraulic Tank: 55 L (15 gal)
  • Fan drive: Belt driven | Shoes, Each Side: 44 | Track Rollers, Each Side: 5 | Operator Station: ROPS and FOPS | Blade Type: Angle
  • Blade: 3.2 m3 (4.2 cu. Yd)
  • Base: 12,800 kg (28,660 lb) | With 3-Shank Ripper: 13,850 kg (30,534 lb)
  • Sealed and lubricated
  • 160 mm (6.3 in)