2020 Rhino Equipment Cold Planers RCP2100T

Information

2020 Rhino Equipment Cold Planers RCP2100T

Rhino® Cold Planers put the tons in the trucks hour after hour, shift after shift. Production is not just about horsepower. It’s how the cold planer delivers the power to the rotor.

Our cold planers offer solid design features, systems that are simple to troubleshoot, and low cost of operation, made for commercial applications and narrow milling projects. Unique cutter housing design gives efficient material evacuation at any cut depth and width. Versatile and productive.

Rhino® cold planers has a head which can be used much like a drill to break up material so that it can be removed. The angle and depth can be adjusted to allow the cold planer to cut down to precisely the desired depth.

Features may include:

  • Our cold planers offer solid design features, systems that are simple to troubleshoot, and low cost of operation, made for commercial applications and narrow milling projects. Unique cutter housing design gives efficient material evacuation at any cut depth and width. Versatile and productive.
  • Independent elevating control MOBA system with two longitudinal axes and one transverse digital leveling system.
  • Four track drive with 26 track-plates for each track, four independent elevating column of hydraulic cylinders.
  • Two stage front loading, foldable discharge belt conveyor system with independent control switches for both stages on the forward/reverse functions with seamless speed controls. Height of discharge adjustable up to maximum 4,700mm and 40 degree swing to both left and right.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Rhino Equipment
  • Cold Planers RCP2100T
  • Model: QSX15
  • Available
  • 800 mm (31 in)
  • Max. Feeding: 4,700 mm (15 ft) | Max. Canopy Raised: 4,120 mm (13.5 ft) | Canopy Lowered: 3,222 mm (10.6 ft) | Min. No Canopy: 3,109 mm (10.2 ft)

Specifications

  • 2020
  • Rhino Equipment
  • Cold Planers
  • RCP2100T
  • General
  • Model: QSX15
  • Cummins
  • Net Power 447 kW (599 Hp) @ 2,200 rpm
  • 15 L (915 cu. In)
  • Tier 2
  • Full-flow spin-on filter
  • Turbocharged
  • Under-hood, dual element dry type
  • Direct Injection
  • Hydraulically activated by operator, Heavy-Duty clutches
  • Hydrostatic closed-loop system provides dynamic braking
  • Manually activated, Drum mounted on transmission output shaft
  • 24 Volts
  • 70 Amp, 120 Ah
  • Milling: 25 m/min (984 in/min) | Speed @2,200 rpm: 96 rpm
  • Max. Travel: 6.0 kmh (4 mph)
  • Gear Pump, Constant displacement
  • System: 28 Mpa (4,061 psi )
  • Tool Spacing (tip): 15 mm (0.6 in) | Swing: 80 degrees (40 degrees each side) | Max. Truck Clearance: 4,700 mm (15.4 ft) | From Center Front Track to Center Rear Track: 4,750 mm (15.6 ft) | Front Center Rear Track to Rear of Machine: 1,210 mm (4.0 ft) | From Center Rear Track to Center of Rotor: 2,100 mm (6.9 ft)
  • 2,100 mm (83 in)
  • Cutting: 320 mm (12.6 in)
  • 1,070 mm (42 in)
  • 800 mm (31 in)
  • Max. Feeding: 4,700 mm (15 ft) | Max. Canopy Raised: 4,120 mm (13.5 ft) | Canopy Lowered: 3,222 mm (10.6 ft) | Min. No Canopy: 3,109 mm (10.2 ft)
  • Conveyor Up: 14,355 mm (47.1 ft)
  • Without Conveyor: 7,390 mm (24.2 ft)
  • 2,840 mm (9.3 ft)
  • 2,480 mm (8.1 ft)
  • Track: 1,500 mm (4.9 ft)
  • Tank: 1,320 L (349 gal)
  • 90 L (24 gal)
  • Engine: 80 L (21 gal)
  • Tank: 3,500 L (925 gal)
  • Tank: 300 L (79 gal)
  • Fan Drive: Belt driven | Number of Tracks: 4.0 | Number of tools: 170 | Water Spray System: Pressurized water spray system ensures dust control and belt lubrication, Flat pattern spray provides better cleaning performance
  • Hydraulically driven for maximum productivity