2020 Rhino Equipment Cold Planers RCP500W

Information

2020 Rhino Equipment Cold Planers RCP500W

Rhino® Cold Planers put the tons in the trucks hour after hour, shift after shift. Production is not just about horsepower. It’s how the cold planer delivers the power to the rotor.

Our cold planers offer solid design features, systems that are simple to troubleshoot, and low cost of operation, made for commercial applications and narrow milling projects. Unique cutter housing design gives efficient material evacuation at any cut depth and width. Versatile and productive.

Rhino® cold planers has a head which can be used much like a drill to break up material so that it can be removed. The angle and depth can be adjusted to allow the cold planer to cut down to precisely the desired depth.

Features may include:

  • Our cold planers offer solid design features, systems that are simple to troubleshoot, and low cost of operation, made for commercial applications and narrow milling projects. Unique cutter housing design gives efficient material evacuation at any cut depth and width. Versatile and productive.
  • Independent elevating control of left and right wheels for quick adjustment of milling depth and curb milling. Easy access doors provide convinient access for the operator to change tools for asphalt or concrete milling.
  • Full hydraulic travel and braking systems provide immediate response for effectiveness and safety. The hydrostatic closed loop system gives excellent power to weight ratios.
  • Diesel Engine provides excellent power, reliability, and efficiency in adverse working conditions. Conveniently placed filters allow for easy maintenance.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Rhino Equipment
  • Cold Planers RCP500W
  • Model: F4L912
  • Available
  • 350 mm (14 in) | Base Machine: 1,420 mm (4.7 ft) | Conveyor: 930 mm (3.1 ft)
  • Max. Feeding: 2,680 mm (9 ft) | Max. Canopy Raised: 2,615 mm (8.6 ft) | Min. No Canopy: 1,600 mm (5.2 ft) | Base Machine: 2,615 mm (8.6 ft) | Conveyor: 590 mm (1.9 ft)

Specifications

  • 2020
  • Rhino Equipment
  • Cold Planers
  • RCP500W
  • General
  • Model: F4L912
  • Deutz
  • Net Power 46 kW (22 Hp) @ 2,200 rpm
  • 3.8 L (232 cu. In)
  • Tier 2
  • Full-flow spin-on filter
  • Turbocharged
  • Under-hood, dual element dry type
  • Direct Injection
  • Hydraulically activated by operator, Heavy-Duty clutches
  • Hydrostatic closed-loop system provides dynamic braking
  • Manually activated, Drum mounted on transmission output shaft
  • Tire Diameter Front: 560 mm (22 in) | Front Wheel to Front of Machine: 505 mm (1.7 ft)
  • Tire Diameter Rear: 408 mm (16 in)
  • 24 Volts
  • 70 Amp, 120 Ah
  • Milling: 28 m/min (1,102 in/min) | Speed @2,200 rpm: 87 rpm
  • Max. Travel: 14.0 kmh (9 mph)
  • Gear Pump, Constant displacement
  • System: 35 Mpa (5,076 psi )
  • Tool Spacing (tip): 15 mm (0.6 in) | Swing: 30 degrees (15 degrees each side) | Max. Truck Clearance: 2,680 mm (8.8 ft)
  • 500 mm (20 in)
  • Cutting: 60 mm (2.4 in)
  • 520 mm (20 in)
  • 350 mm (14 in) | Base Machine: 1,420 mm (4.7 ft) | Conveyor: 930 mm (3.1 ft)
  • Max. Feeding: 2,680 mm (9 ft) | Max. Canopy Raised: 2,615 mm (8.6 ft) | Min. No Canopy: 1,600 mm (5.2 ft) | Base Machine: 2,615 mm (8.6 ft) | Conveyor: 590 mm (1.9 ft)
  • Conveyor Up: 9,340 mm (30.6 ft)
  • Without Conveyor: 3,100 mm (10.2 ft) | Base Machine: 2,930 mm (9.6 ft) | Conveyor: 6,460 mm (21.2 ft)
  • 1,420 mm (4.7 ft)
  • 1,950 mm (6.4 ft)
  • Theoretical Capacity: 84.1 m3/h (110 yd3/h)
  • Tank: 100 L (26 gal)
  • 11 L (3 gal)
  • Engine: 13 L (3 gal)
  • Tank: 240 L (63 gal)
  • Tank: 160 L (42 gal)
  • Fan Drive: Belt driven | Number of tools: 42 | Water Spray System: Pressurized water spray system ensures dust control and belt lubrication, Flat pattern spray provides better cleaning performance
  • Hydraulically driven for maximum productivity