2020 Rhino Equipment Trackloaders RTL36

Information

2020 Rhino Equipment Trackloaders RTL36

Designed to be productive, this machine will give you complete satisfaction in a wide range of tough applications in the most efficient and productive way. Its design also delivers strength and durability with excellent control and unmatched ease of operation.

Offers better fuel efficiency and reduced wear. It works at the point of combustion to optimize engine performance and provide low exhaust emissions.

Specific arrangements are available to extend machine capability to work under severe environmental conditions such as sanitary landfill, recycling site, demolition site, steel mill or soft ground conditions.

Features may include:

  • The RTL series allows you to work hard and efficiently in all conditions. Repeatable fine modulation gives superior bucket control for excellent material handling. RTL Series hydraulic low effort controls allow for quick cycle times in order to increase productivity.
  • Large, spacious cab and low-effort and ergonomic controls provide the operator a convenient and comfortable working area.
  • Easy-to-read, high-visibility gauges and warning lamps keep the operator aware of critical system information.
  • The Rhino track loaders is available with several shoes options to best match to the job conditions. Any details count, and a single track shoe can make the difference.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Rhino Equipment
  • Trackloaders RTL36
  • Cummins Model: NTA855
  • Type: Powershift, planetary gear and multiple disc clutch
  • Available
  • Grouser: 560 mm (22.0 in) | Bucket: 3,100 mm (10.2 ft)
  • Top of Cab: 3,640 mm (11.9 ft) | Top Exhaust Stack: 2,680 mm (8.8 ft) | Dumping at 45 deg.: 3,060 mm (10.0 ft) | Max. Operating: 5,540 mm (18.2 ft) | Max. to Hinge Pin: 4,123 mm (13.5 ft)

Specifications

  • 2020
  • Rhino Equipment
  • Trackloaders
  • RTL36
  • Shiphold/Port Handling
  • Cummins Model: NTA855
  • Cummins | Rhino®
  • Tier 2
  • 6
  • 14 L (854 cu. In)
  • Net Power 257 kW (345 Hp) @ 2,000 rpm
  • Net Peak Torque 1,423 Nm (1,050 lb-ft) @ 1,400 rpm
  • Turbocharged, charge air cooled
  • Under-hood, dual element dry type, restriction indicator on filter housing for service
  • Direct Injection
  • Type: Powershift, planetary gear and multiple disc clutch
  • Individual levers to control each track
  • Double reduction final drives mounted enclosed and isolated
  • 24 Volts
  • Rating: 50A
  • Dynamic braking when decelerator pedal is actuated
  • Manually activated
  • Maximum Travel Speeds 1st Gear Forward: 3.5 km/h (2.2 mph) | Maximum Travel Speeds 1st Gear Reverse: 4.4 km/h (2.7 mph) | Maximum Travel Speeds 2nd Gear Forward: 6.5 km/h (4.0 mph) | Maximum Travel Speeds 2nd Gear Reverse: 7.5 km/h (4.7 mph) | Maximum Travel Speeds 3nd Gear Forward: 11.5 km/h (7.1 mph) | Maximum Travel Speeds 3nd Gear Reverse: 13.5 km/h (8.4 mph) | At 2.0 km/h (1.2 mph): 170(38,218) | At 6.0 km/h (3.7 mph): 50(11,240)
  • Drawbar Pull Maximum: 360 kN (80,931 lb) | Operator Station: ROPS and FOPS
  • 0.11 Mpa (16.09 psi)
  • System: 2 Mpa (290 psi) | 14 Mpa (2,031 psi)
  • Gear pump
  • Max. Flow L/min (gpm): 355 (94)
  • 2 Front lights, 2 Rear lights
  • Ground Contact Area: 35,392 cm2 (5,486 sq.in) | Reach at 45 deg.: 1,398 mm (4.6 ft)
  • Track: 2,140 mm (84.3 in)
  • Grouser: 560 mm (22.0 in) | Bucket: 3,100 mm (10.2 ft)
  • Track on Ground: 3,160 mm (124.4 in)
  • Top of Exhaust: 3,440 mm (11.3 ft)
  • Top of Cab: 3,640 mm (11.9 ft) | Top Exhaust Stack: 2,680 mm (8.8 ft) | Dumping at 45 deg.: 3,060 mm (10.0 ft) | Max. Operating: 5,540 mm (18.2 ft) | Max. to Hinge Pin: 4,123 mm (13.5 ft)
  • Tread Depth with Single-Bar Grouser: 80 mm (3.1 in) | Max. Digging Depth: 145 mm (5.7 in)
  • Dirt: 404 mm (15.9 in)
  • 6,880 mm (22.6 in)
  • Tank: 600 L (159 gal)
  • 121 L (32 gal)
  • Engine: 20 L (5 gal)
  • 185 L (49 gal)
  • Tank: 164 L (43 gal)
  • Fan drive: Belt driven | Shoes, Each Side: 41 | Track Rollers, Each Side: 7 | Control: Lever control for blade with float mode; lever control for ripper
  • Bucket: 3.7 m3 (4.8 cu. Yd)
  • Base: 35,750 kg(78,815 lb) | With 3-Shank Ripper: 40,946 kg(90,270 lb)
  • Sealed and lubricated
  • 229 mm (9.0 in)