2020 Rhino Equipment Wheel Dozers RWD235

Information

2020 Rhino Equipment Wheel Dozers RWD235

Wheel Dozers are specifically designed for mobility, maneuverability and good speed. Wheel dozers can travel at speeds of up to three times faster than track-type tractors.

Built and designed for demanding work, the Rhino® wheel dozer line gives customer's flexibility on the jobsite with the ability to perform a variety of tasks.

These outstanding utility machines are engineered for demanding work and are an excellent choice for applications including surface mining, cleanup, stock piles, road maintenance, reclamation and jobs where travel is required between multiple sites

Features may include:

  • If you`ve got maximum productivity in mind, the Rhino® wheel dozers should be at the top of your list. But it`s not just their big torque reserves thet make them such impressive performers. Joystick control provide smooth, near-effortless control. Rhino® hydraulics sense the load and deliver the flow needed for smooth combined functions and fast work cycles.
  • Control panel provides access to critical machine info, brake and throttle pedals are conveniently positioned for maximum comfort to the operator.
  • Rhino® cylinders offer superior strength and dent resistance deliver longer component life and reduced risk of system contamination. Rhino® Cylinders and Rods are designed to allow for a variety of service / repair options.
  • High quality hose products mean fewer hose changes. Rhino® Equipment offers a broad line of high, medium and low-pressure hoses and couplings that are engineered and tested far beyond industry standards for top performance and long life.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Rhino Equipment
  • Wheel Dozers RWD235
  • Cummins Model: M11
  • Powershift | Torque Converter: Single-stage, Dual-phase, Quad-element torque | Operator Interface: Steering column lever for two gears forward and one in reverse | Shift Modes: Manual activation (Forward: 1st and 2nd; Reverse: 1st)
  • Available
  • Top of Cab and Canopy: 3,730 mm (12.2 ft) | Hood: 3,500 mm (11.5 ft) | Straight Blade: 1,345 mm (4.4 ft) | Universal Blade: 1,467 mm (4.8 ft)

Specifications

  • 2020
  • Rhino Equipment
  • Wheel Dozers
  • RWD235
  • Wheel
  • Cummins Model: M11
  • Cummins | Rhino®
  • Tier2
  • 6
  • 11 L (671 cu in)
  • Net Power 216 kW (290 hp) @ Rated 2,200 rpm
  • Net Peak Torque 1,329 Nm (980 lb-ft) @ Rated 1,500 rpm
  • Full-flow spin-on filter
  • Turbocharged, charge air cooled
  • Under-hood, dual element dry type, restriction indicator on filter housing for service
  • Direct Injection
  • Powershift | Torque Converter: Single-stage, Dual-phase, Quad-element torque | Operator Interface: Steering column lever for two gears forward and one in reverse | Shift Modes: Manual activation (Forward: 1st and 2nd; Reverse: 1st)
  • Heavy duty inboard-mounted planetary
  • Helical bevel gear
  • Articulated frame, fully hydraulic | Articulation Angle: 35 degrees
  • Pneumatically assisted, hydraulically actuaded, four wheels disk brake
  • Manually activated, drum mounted on front output shaft
  • 2-12 volt: 120A
  • System: 24 Volts
  • System: 70 Amp
  • Maximum Travel Speeds 1st Gear Forward: 7 km/h (5 mph) | Maximum Travel Speeds 1st Gear Reverse: 12 km/h (8 mph) | Maximum Travel Speeds 2nd Gear Forward: 26 km/h (16 mph)
  • Rear Axel Oscillation (with 26.5 R 25 20 tires): 24 degrees (12 degrees each direction)
  • Loader and Steering: Gear Pump, variable displacement, closed-center
  • Max. Rated Flow at 2,200 rpm: 210 L/min (55 gpm)
  • System Relief Pressure (Loader and Steering): 21 Mpa (3,046 psi)
  • Loader Controls: Dual-multiway valve, joystick control
  • Max. Lift Above Ground: 980 mm (3.2 ft) | Straight Blade Max. Tilt: 1,100 mm (3.6 ft) | Max. Lift Above Ground: 910 mm (3.0 ft) | Universal Blade Max. Tilt: 1,070 mm (3.5 ft)
  • Measured to centerline of outside tire: 6,487 mm (21.3 ft)
  • Top of Cab and Canopy: 3,730 mm (12.2 ft) | Hood: 3,500 mm (11.5 ft) | Straight Blade: 1,345 mm (4.4 ft) | Universal Blade: 1,467 mm (4.8 ft)
  • 496 mm (1.6 ft)
  • 3,400 mm (11.2 ft)
  • Blade on Ground: 8,280 mm (27.2 ft)
  • Straight Blade: 3,266 mm (10.7 ft) | Universal Blade: 3,065 mm (10.1 ft)
  • Straight Blade Digging : 400 mm (1.3 ft) | Universal Blade Digging : 450 mm (1.5 ft)
  • Tank: 425 L (112 gal)
  • 30 L (8 gal)
  • Engine: 32 L (8 gal)
  • 38 L (10 gal)
  • Oil (each): 70 L (18 gal)
  • Oil (each): 70 L (18 gal)
  • Tank: 300 L (79 gal)
  • Fan Drive: Hydraulic driven
  • Straight Blade: 4.5 m3 (5.9 cu. Yd) | Universal Blade: 6.2 m3 (8.1 cu. Yd)
  • Straight Blade: 3,200 kg (7,055 lb)
  • 26,000 kg (57,320 lb)