2020 Rhino Equipment Wheel Excavators REX75W

Information

2020 Rhino Equipment Wheel Excavators REX75W

The Rhino® excavator is the solution to meet today´s requirements in high performance, maximum uptime, and low cost operation. Designed to keep you competitive, these excavators let you finish the job faster and put more profit in your pocket.

Industry leading fuel efficiency, ergonomic work environment, more comfortable for the operator. New cab design creates a safer work environment. Environmentally friendly – low emission levels, low noise, and more than 95% of the machine is recyclable.

Features may include:

  • This Rhino® excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A high-efficiency “on-demand” cooling system, advanced multifunction monitor, and productivity modes to allow you to choose your digging style headline the long list of advances.
  • Ergonomically correct short-throw pilot levers provide smooth, predictable fingertip control with less movement or effort.
  • Generous flow, and swing torque help speed cycles. So you can do your best to stay on schedule or ahead of the weather.
  • Reliable and durable Diesel engine, more efficient with low maintenance costs.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Rhino Equipment
  • Wheel Excavators REX75W
  • Model: RE51360
  • Available
  • Max. Cutting: 6,200 mm (20.3 ft) | Max. Dumping: 3,000 mm (9.8 ft) | Cab: 1,650 mm (5.4 ft)

Specifications

  • 2020
  • Rhino Equipment
  • Wheel Excavators
  • REX75W
  • Wheel
  • Model: RE51360
  • Rhino®
  • Tier2
  • 4
  • 3.0 L (183 cu in)
  • Net Power 51 kW (60 Hp) @ 2,000 rpm
  • Naturally Aspirated
  • Blade Cylinder(1): 80 mm (3.1 in) | Stabilizers(2): 85 mm (3.3 in) | Boom(2): 115 mm (4.5 in) | Arm(1): 95 mm (3.7 in) | Bucket(1): 85 mm (3.3 in)
  • Blade Cylinder(1): 350 mm (13.8 in) | Stabilizers(2): 650 mm (25.6 in) | Boom(2): 885 mm (34.8 in) | Arm(1): 900 mm (35.4 in) | Bucket(1): 730 mm (28.7 in)
  • Direct Injection
  • Dual speed mode for wheels on-dash one-button activation
  • 6 Tires, 14-17.5
  • 6 Tires, 14-17.5
  • Number: 2
  • Voltage: 24V
  • Rating: 70A
  • Maximum Travel Low: 8(5) | Maximum Travel High: 30(19) | Swing Mechanism: 13 rpm
  • Arm Digging Force: 45 kN (10,116 lb) | Bucket Digging Force: 60 kN (13,489 lb)
  • Open center, load sensing; two constant displacement gear pumps
  • 18 Mpa (2,611 psi)
  • Max. Flow: 150 L/min (40 gpm)
  • Control: 2 Pilot levers, low-effort hydraulic controls with horn
  • Lights: Working lights, turn signals, brake lights
  • Blade Cylinder(1) Rod Diameter: 55 mm (2.2 in) | Stabilizers(2) Rod Diameter: 55 mm (2.2 in) | Boom(2) Rod Diameter: 65 mm (2.6 in) | Arm(1) Rod Diameter: 60 mm (2.4 in) | Bucket(1) Rod Diameter: 55 mm (2.2 in) | Max. Reach: 5,800 mm (19.0 in) | Max. Reach at Ground Level: 5,670 mm (18.6 in) | Max. Vertical Wall: 3,505 mm (11.5 in) | Wheel Tread: 1,650 mm (5.4 ft)
  • Arm: 2,100 mm (6.9 ft)
  • Digging: 3,450 mm (11.3 ft) | Digging Depth at 1,890 mm (6 ft) Flat Bottom: 3,345 mm (11.0 ft)
  • Max. Cutting: 6,200 mm (20.3 ft) | Max. Dumping: 3,000 mm (9.8 ft) | Cab: 1,650 mm (5.4 ft)
  • Transport: 6,500 mm (21.3 ft)
  • With 2,100 mm (6.9 ft) Arm: 3,000 mm (9.8 ft)
  • 2WD: 315 mm (1.0 ft) | 4WD: 300 mm (1.0 ft)
  • With 14-17.5 Tires: 2,200 mm (7.2 ft)
  • 2,265 mm (7.4 ft)
  • 130(34)
  • 17(4)
  • Engine: 21(6)
  • Tank: 100(26)
  • Swing Drive: 8(2)
  • Lifting Capacity at Ground Level, 15' Reach: 4,890 kg (10,781 lb)