Back

2021 John Deere 333G

MoreLess
Limited Time Offer!

Selling Price -$81,500.00

No Images Available

Selling Price -

$81,500.00

HD Certified Pre-Owned
    • Call John Pullen 229-869-2195
    Operators Station:Cab Enclosure
  • Operators Station:A/C
  • Operators Station:Hand Controls
  • Operators Station:Air Ride Seat
  • Operators Station:Hi-Flo
  • Attachments:Aux Hydraulics
  • Tracks:Wide Rubber Tracks
  • Buckets:84" Bucket
  • Call John Pullen @ 229-869-2195
  • 2021
  • John Deere
  • 333G
  • Base
  • General
  • Model: 4TNV94FHT
  • Yanmar
  • Rating: Tier 4
  • Turbo. intercooled
  • 186.3 Inches³ (3.1 ltr)
  • 2500 rpm
  • Output - Net: 96.6 hp (72 kW) | Output - Gross: 100 hp (74.6 kW) | Hydraulic: 50 hp (37.29 kW) | Hydraulic - Option: 82.1 hp (61.234 kW)
  • 291.3 lbf / ft (395 Nm)
  • Rated Operating Capacity - Foundry: 3700 lbs (1680 kg) | Tipping Load - Foundry: 10570 lbs (4799 kg) | Breakout - Lift: 8520 lbf (37.8 kN) | Breakout - Bucket: 13904 lbf (61.8 kN)
  • Maximum: 7.8 mph (12.6 kph)
  • Pump: 25 gallons US / min (95 lt/min) | Pump - Option: 41.1 gallons US / min (156 lt/min)
  • Ground Bearing Foundry: 5 Psi (34.1 kPa) | System: 3450 Psi (237.87 bar)
  • Rear Departure Angle: 31 Degrees | Dump Angle: 48 Degrees | Rollback - Ground Level: 35 Degrees
  • Shoe: 17.7 inches (450 mm)
  • No Bucket: 122 inches (3100 mm) | With Bucket: 146 inches (3710 mm)
  • No Bucket: 80.7 inches (2050 mm)
  • Top Of Cab: 86.7 inches (2200 mm) | To Hinge Pin: 132 inches (3350 mm) | Dump - Maximum Foundry: 106.1 inches (2690 mm)
  • 9.4 inches (240 mm)
  • 63.1 inches (1600 mm)
  • Tank: 30 gallons US (114 ltr)
  • 12100 lbs (5493 kg)
  • Lift Geometry: Vertical
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $81,500.00
  • Ag and Turf
  • Pre-Owned
  • G703511
  • 2021
  • John Deere
  • 333G
  • 1T0333GMAMF393908
  • Model: 4TNV94FHT
  • 688
  • Available
  • No Bucket: 80.7 inches (2050 mm)
  • Top Of Cab: 86.7 inches (2200 mm) | To Hinge Pin: 132 inches (3350 mm) | Dump - Maximum Foundry: 106.1 inches (2690 mm)

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.