2020 Amadas Industries Long Reach Mower LRM6019
- Year 2020
- Make Amadas Industries
- Model Long Reach Mower
2020 Amadas Industries Long Reach Mower LRM6019
The Amadas Long Reach Mower sets new standards for maintaining wood lines, ditch banks, and other hard to reach areas. You can cut grass, weeds, brush, tree limbs, and small trees up to 5-1/2” in diameter. With over 19’ of reach both horizontally and vertically, plus the ability to reach over fences and down hillsides, you can virtually reach all of your problem mowing areas.
Engine
Engine Power
Tractor requirements: 150 HP min
Displacement
3.8 cu. in/rev
PTO
PTO Power, Rated Engine Speed
850 RPM
Operational
Operating Speed
@ 850 PTO: 1428 RPM @ 100% eff. 1214 RPM @ 85% eff
Hydraulics
Hydraulic Pump
6.38 cu. in/rev
Hydraulic Flow
Of pump @ 850 PTO speed: 23.5 GPM @ 100% eff. 20.0 GPM @ 85% eff. | Tractor hydraulic requirements: 15 GPM pump minimum
Chassis
Hitch/Type
CAT II standard CAT III or CAT IIIN Quick Hitch
Dimensions
Spindle Diameter
Mower: 2 3/4", 4142 steel, with 2 3/4" tapered bearings
Cutting Width
5' (60")
Height
Folded up: 10 ft (119 11/16")
Width
Folded up: 9 ft 5/8" (108 5/8")
Dimensions
Main boom: 5" x 5” x 3/8" tubing with plated ends | Secondary Boom: 5" x 5" x 3/8" tubing with plated ends | Max vertical reach from center of pump: 18' (216") to center of mower deck | Blades (as a pair): 5/8" thick 5" offset (std)
Capacities
Hydraulic Capacity
50 gals of single viscosity, 10W API service CD/SE, hydraulic oil
Hitch Lift Capacity
Required tractor: 7000 lbs min (as rated by ASABE standards )
Features
Cut: 5-1/2"
Weights
Weight
Of standard mower (less ballast): 4100 lbs with hydraulic oil | Total of standard mower with ballast: 6000 lbs
Features
Construction Material
Debris: 3/8" thick, layered rubber belting | Skid shoe: 7 gauge steel | Pivoting forward cutting shield: 1/2" plate steel, reinforced with 3/4" round steel
Construction Material, Deck
7 gauge, reinforced by plate and tubing