2024 Athens Plow Company Chisel Plows 156 3 Bar 10'

2024 Athens Plow Company Chisel Plows 156 3 Bar 10'

Tine Size

Tine Spacing - 12"

Chisel Points - 5/8"

Clearance, Frame to Point - 26" or 32"

2 Bar Extension Widths - 2' or 4'

3 Bar Extension Widths - 2', 4', or 6'

Hitch – Category I, II, or III

3/8 " Twisted Shovel

2' or 4' EXTRA Extensions - 2 Bar Units

2', 4', or 6' Extensions - 3 Bar Units

15" Gauge Wheels, Adjustable

Quick Coupler Adaptors - Category II & III

Features may include:

• The Heavy Duty Frame is constructed of structural 4" x 4" steel tubing welded into a unitized one-piece frame. All high stress areas are reinforced to resist bending and twisting.

• The Vertical Clearance between the chisel point and the bottom of the frame is 26" or 32" depending on the tine size.

• Tines are mounted 24" apart on the 2 Bar units and 36" apart on the 3 Bar units. Then they are staggered from front to rear with a spacing from the center of the unit yielding a 12" pattern.

• The Rigid Tine Pivot Assemblies are used where rocks are not a problem. Available on 5' and 7' 2-Bar units only.

• The Spring Tine Pivot Assemblies feature dual springs made of ½" oil tempered steel for strength and durability. The spring mounts are cast with internal and external helicals that match the ends of the springs. As the spring is stressed, the load is distributed evenly out the entire length of the spring. This distribution aids in avoiding stress concentrations.