2024 John Deere Draper Platform HDR35
- Year 2024
- Make John Deere
- Model Draper Platform
2024 John Deere Draper Platform HDR35
- Capture more crop in rolling and uneven terrain with a wing range of over 30"
- Achieve desired stubble height with Position Control Gauge Wheels
- Reduce cutterbar loss with Grain Saver Draper Belts
- Improve harvest logistics with a factory-installed Integrated Transport system
Features may include:
Follow the ground to capture more cropJohn Deere HDR and HDF Drapers follow the ground by pivoting, gliding, and flexing over uneven fields to provide the best cut possible.
- Achieve the best of both worlds by adding a flexible cutterbar to a hinged draper, which already provides double the wing range of the MacDon® FD1 Draper – Hinged Drapers are available with a rigid knife on an HDR and a flexible knife on an HDF. The HDF Hinged Draper reduces missed crop when cutting on the ground in soybeans or lentils by 6 percent compared to MacDon and 2 percent compared to the HDR and RDF.
- NOTE: Theoretical internal John Deere study between a 13.7-ft (45-m) MacDon FD75, 640FD, HD50R, and HD50F based on static machines by measuring the area between the knife and ground based on the average lowest pod.
- Capture more crop by adjusting to the ground – Industry-exclusive hydraulic suspension separates the header from the combine, allowing it to float over the field for a more consistent cut. As the header approaches extreme field terrain, Active Feeder house Position Control automatically adjusts the feeder house height to position , enabling more float range in challenging fields
- Harvest in difficult crop conditions – Capture downed crop with the push of a button on the CommandARM™ console to automatically raise the gauge wheels and extend your reel out and down. Harvest the most challenging lodged crop confidently with a 24 percent increase in reel torque (compared to the 700FD).
- Keep a clean cutterbar no matter the field or crop – A more consistent distance between the reel fingers and cutterbar (compared to the MacDon FD145) ensures the crop is cleanly swept across the cutterbar and evenly fed into the combine throughout the full wing range.
- Improve the consistency of stubble height by 25 percent compared to the MacDon FD1 – Achieve consistent stubble height behind the combine – an advantage for better seeding performance in no-till applications. Compared to the competition, operators no longer must leave the cab to set the cut height with John Deere height control gauge wheels. The draper automatically maintains the desired cut height while floating over the land.
MacDon is a trademark of MacDon Industries Ltd.
All-day performance in all crops and conditionsThe goals for harvest are simple – harvest on time and put more grain in the tank. The John Deere HDR and HDF Drapers not only harvest more bushels per hour and acres per day but capture more crops along the way.
- Reduce cutterbar loss by 25 percent – John Deere Grain Saver Draper Belts help trap grain before it can roll past the cutterbar onto the ground (compared to standard draper belts) with a unique crosshair (+) design.
- Cut header loss by up to 25 percent – Decrease header loss in high-volume canola with large fingered top augers (compared to non-fingered augers) that grab fluffy crops and pull them against the draper belts. Fingered top augers let you easily straight-cut canola.
- Reduce center section losses by up to 45 percent
- In-cab settings help you spend more time harvesting – In-cab header downforce adjustment saves time during the day compared to out-of-cab, by-hand adjustments on MacDon® models.
MacDon is a trademark of MacDon Industries Ltd.
Operational
Operating Speed
Knife: X Series Combine: 520 cycles/min / S-Series Combine: 490 cycles/min | Pickup reel operating: 8-70 rpm | Low speed: 200 rpm / High speed: 240 rpm
Dimensions
Dimensions
Knife drive - Double-cut, dual-drive, shaft-driven cutterbar: 4 in. (10.2 cm) | Pickup reel - Diameter: 42 in. (106.7 cm) | Reel lift - Off the cutterbar: 39.6 in. (100.6 cm) | Reel fore and aft - Fore of the cutterbar: 10.4 in. (26.4 cm) | Feed drum - Diameter: 16 in. (40.6 cm) | Feed drum fingers - Heavy-duty and round with breakaway notch and retainer Diameter: 0.625 in. (16 mm) | Finger reach: 6 in. (152 mm)
Cutterbar Length
35 ft (10.7 m)
Length
50.1 ft (15.3 m) | Platform: 37.8 ft (11.5 m)
Height
Base skid shoe: 1.5 in. (3.8 cm) | Cleat: 0.75 in. (19 mm)
Width
Side belts: 14.3 ft (4.4 m) / Center belts: 79 in. (200 cm)
Depth, Maximum
Belt: 39.8 in. (100 cm) | Overall operating - With dividers: 10.6 ft (3.2 m)
Auger Diameter
Top - Size: 17 in. (43.2 cm)
Features
Features
Draper belts speed control: Hydraulic from cab (side belts only) | Platform Type: Hinged frame rigid cutterbar | Number of slats: Six bat poly | Height control: Hydraulic | Speed control: Hydraulic | Number of fingers: 18 | Auger finger platform: Triple chevron, retracting | Header height sensing: Electrohydraulic
Cutterbar Type
Straight-line knife drive system
Construction Material
Fingers: Nylon