2024 John Deere S Series S7 800

2024 John Deere S Series S7 800

Swipe to View More

  • Year 2024
  • Make John Deere
  • Model S Series
2024 John Deere S Series S7 800

2024 John Deere S Series S7 800

2024 John Deere S Series S7 800

  • All new from top to bottom, with larger1, more comfortable X9 cab
  • Integrated G5Plus CommandCenter™ Display, StarFire™ Receiver and JDLink™ modem
  • Improved Grain Loss Sensing with 2X1 more sensors for more accurate loss sensing
  • Available Predictive Ground Speed and Harvest Settings Automation
  • John Deere PowerTech™ 13.6L engine delivering 10% more maximum torque and 10% less fuel usage1

Features may include:

High-capacity harvesting in corn and beans

Designed for performance in coarse grain crops, the TriStream™ rotor and Dyna-Flo™ Plus cleaning shoe efficiently thresh and clean grain in tough harvesting conditions. The TriStream rotor helps maximize fuel efficiency with technology that reduces the force required to move material through the combine by as much as 20 percent. High capacity starts at the feeder house, where the S Series provides large areas of clearance for high volumes of crop to flow uninterrupted.

  • TriStream rotor delivers performance – A slightly tapered front nose dramatically reduces the growling that often comes with thick crops and heavy rotor loads. Spiral vanes around the rotor guide the crop material through the feeding and threshing area, reducing hesitation and improving productivity. Meanwhile, rifling grooves on the elements allow the bullet-shaped rotors to move large volumes of crop material through the rotor more efficiently. Rifled elements grip crop material, providing a pulling action that helps even the crop flow, allowing the rotor to deliver better threshing performance.
  • Dyna-Flo Plus delivers clean grain – Consider your capacity needs met. In fact, in shoe-limited conditions, you get 10 percent more capacity in corn than previous models, which equates to another 0.6 ha/hr (1.5 acre/hr). The key is uniform distribution and a unique two-stage pre-cleaning design. Four conveyor augers move material onto the shoe steadily and evenly, even on hillsides. A fixed front chaffer helps thin the crop mat; about 30 percent of the air goes to the front chaffer at high speed, allowing it to clean up to 40 percent of the free grain before it reaches the main chaffer. A huge rear chaffer and larger sieve (12 percent larger than previous models) are specially designed to handle the threshing and separating performance of the S7.
Raise your capacity in tough small grains or rice

Truly tough conditions demand more than simple solutions. Rather than slightly improve performance in rice, canola, wheat, barley, oats, or other tough small grains, John Deere S7 Combines set new capacity standards with four crucial components: Active Concave Isolation, a high-performance feeder house, heavy-duty interrupter grates with integrated interrupters, and the variable-stream rotor. When you’re looking at a storm on the radar and you don’t have time to spare, you can run full throttle and still put your toughest crop into the machine without any issues.

  • Better material handling – The industry-exclusive variable-stream rotor features a longer, more tapered front cone design that excels in wet, green rice or small grains where the straw is especially tough. The variable-stream rotor with adjustable top cover transport vanes is recommended for rice producers and those facing tough threshing conditions. The vane angle can be adjusted to reduce the stress on straw material as it flows around the rotor, increasing the quality of the straw while using less fuel. Along with the tough material handling capabilities of the variable-stream rotor configuration, the straw quality and length can be improved due to the electrically adjustable top cover transport vanes.

Engine

Engine Manufacturer John Deere
Engine Type PowerTech
Displacement 830 cu in. (13.6 L)
Engine Power 473 hp (353 kW) | Maximum: 540 hp (402 kW) | Boost @ rated speed: 50 hp (37 kW)
Emissions Final Tier 4 / Tier 2 (Australia/New Zealand)
Rated Engine Speed 2,000 rpm

Drivetrain

Drive System Fixed or multi-speed

Operational

Operating Speed Rotor range: High: 400-1,000 rpm / Low: 210-530 rpm | Cleaning fan: 620-1,350 rpm
Operating Conditions Peak unloading rate: 4.2 bu/sec (150 L/s)

Dimensions

Dimensions Concave area: 11.8 sq ft (1.1 m2) | Separating area: 16.6 sq ft (1.54 m2) | Discharge grate area: 4.8 sq ft (0.45 m2) | Front chaffer: 5.4 sq ft (0.5 m2) | Front chaffer extension: 8.6 sq ft (0.8 m2) | Chaffer: 26.9 sq ft (2.5 m2) | Sieve area: 22.6 sq ft (2.1 m2) | Total cleaning area (louvered): 63.5 sq ft (5.9 m2)
Rotor Length 123 in. (312 cm)
Rotor Diameter 30 in. (76.2 cm)
Width 55 in. (139.7 cm)
Length 67.9 in. (172.5 cm) | Unloading auger: 22.5, 26 or 28.5 ft (6.9, 7.9 or 8.7 m)

Capacities

Fuel Capacity 330 gal. (1,250 L)
Features Grain tank size: 400 bu (14,100 L)

Weights

Weight Total machine: 22,286 kg (49,141 lb)

Features

Features Feed Accelerator, Stone Trap (FAST): Reverser | Separator type: Rotary
Conveyor Type chain slat type: Cast iron

Product Photography