2024 John Deere Large Square Baler L331
- Year 2024
- Make John Deere
- Model Large Square Baler
2024 John Deere Large Square Baler L331
2024 John Deere Large Square Baler L331
Large Square BalerBale Documentation with John Deere Operations Center™
MegaWide™ pickup with MegaTough™ pickup teeth
John Deere moisture sensor and weighing system
BalerAssist™ drivetrain system
Features may include:
MegaWide™ pickup with MegaTough™ pickup teeth provide added durability- 2.2-m (7.2-ft) wide pickup is available on the L331R and L341R Baler
- Available with standard or premium components
- Tooth-to-tooth width is 1.92 m (76 in.)
- The premium MegaWide pickup is available for the L331 and L341 Large Square Balers. The premium pickup offers larger components to increase the durability and reliability of the pickup.
- Larger cams and cam bearings
- Larger spider gears
- The John Deere-designed double-tie knotting system is gear and driveline driven to ensure the needle-to-plunger timing is maintained throughout the life of the baler.
- The needle lift crank and clutch rocker arm are made of hardened cast iron to improve strength and durability of the knotter clutch. The gearbox drives the system around 360 degrees to complete a tie.
PTO
PTO Power, Rated Engine Speed
Minimum: 115 PTO hp (86 kW) - no Pre-Cutter / 97 kW (130 PTO hp) - with Pre-Cutter
Wheels & Tires
Tires, Rear Specification
600/50/22.5 or 710/40R/22.5
Dimensions
Bale Diameter
80x90 cm (3x3 ft)
Width
Bale: 32 in. (80 cm) | Intake: 220 cm (86 in.) | Machine: 9.1 ft (2.76 m)
Height
Bale: 35 in. (90 cm) | Machine: 8.9 ft (2.7 m)
Bale Length
24 up to 118 in. (60 up to 300 cm)
Dimensions
Pickup diameter: 10 in. (25.6 cm) | Tine spacing: 2.6 in. (6.6 cm)
Stroke
Plunger: 27 in. (69.5 cm)
Length
Bale chamber: 120 in (305 cm) | Cutting:1.7 in. (44 mm) or 3.5 in. (88 mm) | Machine: 25.6 ft (7.8 m)
Capacities
Features
Twine capacity (rolls): 30
Weights
Weight
16,975 lb (7,700 kg)
Features
Knife Quantity
11, 7, or 6
Features
Number of tine bars 4-5: Four | Number of plunger strokes: 45 spm | Density control: Three hydraulic cylinders | Control: ISOBUS - GreenStar™ 2 1800 or GreenStar 3 2630 | Number of knotters: Four | Knife protection: Individual spring