Current John-Deere-Flint Agriculture-Turf Agriculture Tillage-Equipment Field-Cultivators-Mulch-Finishers 2330

2024 John Deere 2330 Base

2024 John Deere 2330 Base

Swipe to View More

  • Year 2024
  • Make John Deere
  • Model 2330
Shop John Deere Pre-Owned
Product Details Specifications Photos
2024 John Deere 2330 Base

2024 John Deere 2330 Base

  • Year 2024
  • Manufacturer John Deere
  • Model Name 2330
  • Trim Name Base
  • Generic Type (Primary) General
  • Engine Power Horsepower per foot: 10 to 14 hp/ft (24.5 to 34.2 kW/m)

2024 John Deere 2330

Mulch Finisher

Working widths from 21 ft, 9 in. to 56 ft, 3 in. (6.6 to 17.2 m)

Excellent residue handling capabilities

Lattice-style frame design

TruSet™ Active improves tillage depth accuracy and makes adjustments for varying field conditions, such as tire sink in soft soils or residue build up on tires, with no need for operator input

Features may include:

Wide range of working widths available to match acreage and horsepower requirements
  • Three-section configuration
  • Five-section configuration
Level-Lift™ frame ensures even operation through all operating depths
  • T-hitch with Level-Lift turnbuckle
  • Level-Lift turnbuckle
  • The Level-Lift hitch ensures a level operation through all operating depths. It also provides consistent gang and sweep depth fore to aft for thorough seedbed preparation. This quick, easy adjustment ensures a flat seedbed floor and level soil profile for planting.
Low-concavity disks are spaced for effective residue slicing
  • Low-concavity disk blades
  • Disks engaged on 2330
  • The producer can work ground faster with the 508-mm x 5-mm (20-in. x 0.197-in.) low-concavity disk blades and outside blades tapered to 457 mm (18 in.) on the 2330 Mulch Finisher"

Engine

Engine Power Horsepower per foot: 10 to 14 hp/ft (24.5 to 34.2 kW/m)

Wheels & Tires

Wheels Stabilizer: Mechanical stabilizer wheels and tires available for only 5-section | Castering: Active-hydraulic castering wheels and tires available for 3- and 5-section

Electric

Electrical 9-pin connector for warning lights, 12-volt required for 5-section models

Operational

Operating Speed Miles per hour: 6 to 10 mph (9.7 to 16 km/h)

Hydraulics

Hydraulic Type Three selective-control valves (SCVs) required

Chassis

Frame Type Centerframe : 10 ft, in. (3 m) / Rank tubes - 4x4 in. (10.2x10.2 cm) / Mainframe fore-aft tubes - 3x8 in. (7.6x20.3 cm) / Wing fore-aft tubes - 3x6 in. (7.62x15.2 cm)

Dimensions

Dimensions Standard spacings - Inches: 9 in. (22.9 cm) | Fore-and-aft: 134 in. (340.4 cm) | Underframe clearance: 24 in. (61 cm) | Vertical adjustment From even with the sweeps to 8 in. (20.3 cm) | Gang angle, degrees: 8 degree (angle) | Blade size: 20x0.197 in. (50.8x0.5 cm) | Blade spacing: 7.25 in. (18.42 cm) | Gang shaft diameter: 1.125 in. (28.6 mm)
Transport Height Without rear harrow - 3-section: 10.25 ft (3.12 m) / 12.33 ft (3.76 m) / 13.25 ft (4.04 m) / 15.17 ft (4.62 m) / 16.67 ft (5.08 m) | 5-section: 11.75 ft (3.58 m) / 12.83 ft (3.91 m) / 14.75 ft (4.5 m) / 16 ft (4.87 m)
Width, Working Position 3-section: 21.75 ft (6.63 m) / 24.75 ft (7.54 m) / 27.75 ft (8.46 m) / 30.75 ft (9.37 m) / 33.75 ft (10.29 m) | 5-section: 38.75 ft ( 11.81 m) / 44.25 ft (13.49 m) / 50.25 ft (15.32 m) / 56.25 ft (17.15 m)
Transport Width Without rear harrow - 3-section: 14.17 ft (4.32 m) / 14 ft (4.27 m) / 14.58 ft (4.44 m) / 14.75 ft (4.5 m) / 14.5 ft (4.72 m) | 5-section: 15.33 ft (4.67 m) / 15.5 ft (4.72 m)
Depth, Maximum 6 in. (15.2 cm)

Weights

Weight Tongue weight rating: 1,500 lb (680 kg)

Features

Features Fold Type: Flex - 3-section or 5-section | Number of ranks: Five | Type of scrapers: Combination
Construction Material Type of spool: Steel fabricated

Product Photography