2018 John Deere 9520RX Scraper Special Base
- Year 2018
- Make John Deere
- Model 9520RX Scraper Special
- Engine John Deere PowerTech™ PSS 13.5L (B20 diesel compatible) | Engine family: JJDXL13.5310
2018 John Deere 9520RX Scraper Special
Features may include:- ComfortCommand™ seat with air suspension, lumbar support, swivel, fore-aft and lateral attenuation, backrest angle adjustment, adjustable left-hand armrest, and 40-degree right-hand seat swivel
- Operator presence system that warns if the operator is out of the seat while operating key functions
- Folding instructional seat
- CommandARM™ control center with integrated controls
- 4100 or 4600 Generation 4 CommandCenter™ processor
- Behind-the-seat storage
- Left-hand storage compartment
- Passive noise reduction system
- Service ADVISOR™ diagnostic system data port
- Tilt/telescoping steering wheel with position memory
- Swing-out rear window, opens 30 degrees
- Right- and left-outside mirrors (manually adjustable mirror head)
- Monitor mounts on right-hand front post and rear cab post
- Standard radio package, including AM/FM stereo and weatherband with remote controls, auxiliary input jack, four speakers, and an external antenna
- Laminated glass
- Air conditioner and heater with automatic temperature controls (ATC)
- Two 12-V convenience outlet (cigarette lighter style)
- One 12-V 3-pin outlet with adapter (provides switched and unswitched power
- One International Organization for Standardization (ISO) 9-pin connector
- Power strip with convenience plug adapter
- Hitch control lever lock and selective control lever lock
- Two-speed and intermittent front and rear wiper with washer
- Front pull-down sunshade
- Inside-mounted rearview mirror
- Beverage holders sized to accommodate various containers
- Interior left-hand dome light
Engine
Engine
John Deere PowerTech™ PSS 13.5L (B20 diesel compatible) | Engine family: JJDXL13.5310
Engine Type
Diesel
Cylinder Liners
in-line, 6 wet-sleeve with 4 valves-in-head
Rated Engine Speed
2,100 rpm
Aspiration
Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation
Emissions
Final Tier 4
Displacement
13.5 L 824 cu in.
Engine Power
Rated: 382 kW 520 hp
Engine Torque
peak: At 1,600 rpm: 2,169 Nm 380 lb-ft
PTO
PTO Power, Rated Engine Speed
PTO torque rise: 38 percent | Rear power take-off (PTO): Independent 44 mm (1.75 in.) 20-spline, 1,000 rpm
Drivetrain
Transmission
Standard: John Deere e18™ 18-speed PowerShift with Efficiency Manager™: 40 km/h 25 mph
Final Drive
Bull gear and double idler with floating pinion
Differential Lock
Rear axle: Full-locking electrohydraulic | Front axle: Full-locking electrohydraulic
Steering
Hydraulic power-steering
Axle Count
Rear axle supports | Front axle supports
Hydraulics
Hydraulic Type
Closed-center, pressure/flow compensated | Selective control valves: 4 - 6 factory, up to 8 field installed
Hydraulic Pump
rated output: 220 L/min 58 gpm
Hydraulic Flow
Available at a single rear SCV: 1/2 in. couplers: 132 L/min 35 gpm | Number of rear selective: ISO Couplers: 4-6
Electric
Alternator
200 amp
Electrical
Total cold cranking amps: 925 CCA
Dimensions
Dimensions
Wheel tread range Narrow undercarriage: 2032-3048 mm 80-120 in. | Wide undercarriage: 2235 mm
Turning Radius
without brakes: 6,400 mm 21 ft
Wheelbase
4,128 mm 162.5 in.
Overall Length
Excluding hitch: 7,637 mm 300.7 in. - Including hitch and coupler: 8,217 mm 323.5 in.
Dimensions
Drawbar clearance: 403 mm 15.9 in.
Capacities
Hitch Lift Capacity
Maximum behind lift points: Category 4N/4: 9,072 kg 20,000 lb
Drawbar Capacity
Category 5: 5,440 kg 12,000 lb
Volume
Inner cab: 3.597 m3 127 cu ft
Oil capacity
Crankcase: 48 L 12.7 U.S. gal.
Fuel Capacity
1,514 L 400 U.S. gal. | Diesel exhaust fluid (DEF) tank: 83 L 22 U.S. gal.
Cooling System
Capacity: 56.5 L 14.9 U.S. gal.
Hydraulic Capacity
Transmission: With 3-point hitch and PTO: 227 L 60 U.S. gal. - Without 3-point hitch and PTO: 220 L 58 U.S. gal.
Weights
Weight, As Shipped
Open;Cab: 24,494 kg 54,000 lb
Weight
24,494 kg 54,000 lb | Maximum ballast level: 28,122 kg 62,000 lb
Features
Hitch/Type
Category 4N/3: 6,804 kg 15,000 lb - Category 4N/3: 9,072 kg 20,000 lb
Features
Hitch Sensing type: Electrohydraulic with draft sensing | Interval for engine oil change: 400 hours | Interval for hydraulic/transmission oil change: 1,500 hours | Interval for engine coolant change: 6,000 hours
Cab
Seat Type
ComfortCommand™ | Instuctional seat: Standard
Cab Construction
suspension: Standard | Display: 4100 Generation 4 CommandCenter™ with 7 in. display | Cab glass area: 6.52 m2 70.18 sq ft