2018 John Deere 9570RX Scraper Base

2018 John Deere 9570RX Scraper Base

Swipe to View More

  • Year 2018
  • Make John Deere
  • Model 9570RX Scraper
2018 John Deere 9570RX Scraper Base

2018 John Deere 9570RX Scraper Base

2018 John Deere 9570RX Scraper

Features may include:
  • ComfortCommand™ seat with air suspension, lumbar support, swivel, fore-aft and lateral attenuation, backrest angle adjustment, adjustable left-hand armrest, and 40-degree right-hand seat swivel
  • Operator presence system that warns if the operator is out of the seat while operating key functions
  • Folding instructional seat
  • CommandARM™ control center with integrated controls
  • 4100 or 4600 Generation 4 CommandCenter™ processor
  • Behind-the-seat storage
  • Left-hand storage compartment
  • Passive noise reduction system
  • Service ADVISOR™ diagnostic system data port
  • Tilt/telescoping steering wheel with position memory
  • Swing-out rear window, opens 30 degrees
  • Right- and left-outside mirrors (manually adjustable mirror head)
  • Monitor mounts on right-hand front post and rear cab post
  • Standard radio package, including AM/FM stereo and weatherband with remote controls, auxiliary input jack, four speakers, and an external antenna
  • Laminated glass
  • Air conditioner and heater with automatic temperature controls (ATC)
  • Two 12-V convenience outlet (cigarette lighter style)
One 12-V 3-pin outlet with adapter (provides switched and unswitched power
  • One International Organization for Standardization (ISO) 9-pin connector
  • Power strip with convenience plug adapter
  • Hitch control lever lock and selective control lever lock
  • Two-speed and intermittent front and rear wiper with washer
  • Front pull-down sunshade
  • Inside-mounted rearview mirror
  • Beverage holders sized to accommodate various containers
  • Interior left-hand dome light

Engine

Engine Manufacturer Cummins QSX15
Rated Engine Speed 2,100 rpm | PS (hp ISO) at 2100 engine rpm (97/68EC): 570 hp (419 kW)
Engine Power Max PS (hp ISO) at 1900 engine rpm (97/68EC): 628 hp (461 kW) | Max Engine power PS (hp ISO) at 1900 engine rpm (97/68EC): 38% | Max Engine power PS (hp ISO) at 1900 engine rpm (97/68EC): 10%
Fuel Type Diesel
Cylinder Liners in-line, 6 wet-sleeve with 4 valves-in-head
Aspiration Single Variable geometry turbocharger air-to-air aftercooling and cooled exhaust gas recirculation
Air Filter Dual stage with exhaust aspiration
Displacement 912 cu in. (14.9L)
Bore 5.39 in (137mm)
Stroke 6.65 in (169mm)
Compression Ratio 17.2:1
Lubrication Full-pressure, full-flow filtration with bypass
Oil Filter Replaceable spin-on style oil filter

Drivetrain

Transmission e18™ 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager™
Axle Count Bull gear and double idler with floating pinion. | 120 mm flanged: Standard
Steering Hydraulic power-steering
Differential Lock Full-Locking electrohydraulic, front and rear axle, with AutoMode | Auto disengagement for various selectable turn angles

Hydraulics

Hydraulic Type Selective control valves: 4 Standard, 6 Available
Maximum Pressure 2,900 psi (20,000 kPa)
Hydraulic Pump Maximum flow with Base Hydraulics: Standard: 58 U.S. gpm / 220 Lpm | Maximum pump flow: High-Flow: 115 U.S. gpm/ 435 Lpm
Hydraulic Flow Available flow at a single SCV with High-Flow - 3 /4 in coupler: 42 U.S. gpm/159 lpm

Fuel System

Fuel System High Pressure Common Rail (self priming) | Filter system: Two Stage with water separator and service indicator light | Filter, primary: 7 micron spin-on style with water in fuel sensor and drain | Filter, secondary: 3 micron spin-on element

Electric

Alternator /Battery: 200 amps / 12 Volt – 240 amps

Battery

Battery (4) 925 CCA

Brakes

Brake System Type Hydraulic power, wet disk, self adjusting on front and rear axle

Dimensions

Track Width 30-in. (762 mm) belt
Dimensions Track Spacing: Fixed 87 in (2218 mm) | Cab glass area: 70.18 sq ft (6.52 sq m) | Degrees of Articulation: 36° of Articulation on Ag models / 24° on Scraper Special models | Degrees of Oscillation: Gudgeon area oscillation is 15° | Degrees of Undercarriage Oscillation: ±10°
Wheelbase 163.5 in. (4154 mm)
Turning Radius 21.0 ft (6400 mm) on Ag models / 30.0 ft (9144 mm) on Scraper Special models

Capacities

Drawbar Capacity Cat 5 w/ HD Drawbar Support 5440 kg (12000 lb) Max Vertical Load
Fuel Capacity 400 gal (1514 L) | DEF Tank: 22 gal (83 L)
Cooling System Capacity: 14.9 gal (56.5 L)
Features Crankcase with filter: 12.7 gal (48 L)
Hydraulic Capacity /transmission/axle oil without 3-point rear hitch and PTO: 58 gal ( 220 L) | Hydraulic/transmission/axle oil with 3-point rear hitch and PTO: 60 gal (227 L)
Volume Cab: 127 cu ft (3.597 cu. M)

Weights

Weight, As Shipped 52,000 lb (23,587 kg)
Weight, In Running Order 62,000 lb (28,123 kg)

Features

Track Type Belts: Camso 3500 Series and Camso 6500 Series track belts

Product Photography