2024 John Deere R Series Zero Turn Mowers Z997R Diesel 60 in 7Iron™ PRO
- Year 2024
- Make John Deere
- Model R Series Zero Turn Mowers
2024 John Deere R Series Zero Turn Mowers Z997R Diesel 60 in 7Iron™ PRO
Features may include:
Powerful diesel engine for increased performance- The Z997R is powered by a 3-cylinder, liquid-cooled diesel engine with a gross 37.4 hp (27.5 kW) that meets U.S. Environmental Protection Agency (EPA) Final Tier 4 emission standards. The engine achieves Final Tier 4 compliance by using a diesel oxidation catalyst with diesel particulate filter (DOC/DPF) system.
- The three-cylinder diesel engine features low noise levels, superior fuel economy, and a high torque reserve that provides plenty of power and performance.
- Key features of the engine include:
- Economical, cast-in block cylinder design gives good cooling and long life.
- Liquid-cooled design provides more consistent operating temperatures than air-cooled.
- Direct fuel injection is provided.
- Injects fuel directly on top of pistons for more efficient combustion
- Develops more horsepower per gallon of fuel
- Improves starting
- Aluminum alloy pistons with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat-transfer characteristics.
- Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by fuel and noise from the piston slap
- Higher top rings on the piston and a thinner head gasket greatly reduce the volume of unburned waste and increase combustion efficiency
- Timing gears and injector drive gears utilize helical profile gears to help lower engine noise.
- Gear teeth have a newly designed ''roll-off'' profile, giving almost no clash, no noise, and no backlash
- Fuel filter with replaceable element is provided.
- Full-pressure intake manifold provides quick starts in temperatures down to 0°F (-18°C).
- Auto-bleed fuel system gives extra convenience.
- No need to prime the system if the unit runs out of fuel; the system will self-prime the injection pump, lines and injectors, providing fast fuel recovery
- Key start and shutoff eliminate fuel shut-off knob; electric solenoid shuts fuel supply off immediately when key is turned off.
- See-through coolant recovery tank permits operator to check coolant level without removing radiator cap.
- Sealed radiator compartment keeps trash and debris on outside of hood.
- Dual-element, dry-type air cleaner with safety element and air service indicator is provided.
- Dual-element design for added engine protection
- Easy to service
- Completely sealed for effective cleaning and 90 to 95 percent of dirt ejected before it reaches the paper element
- Secondary safety element for additional filtering
- Air-restriction indicator to let operator know when the filter needs servicing
- Full-pressure lubrication with full-flow filter lengthens engine life.
- Engine wear reduced by ensuring proper lubrication, even when operating on hillsides or uneven terrain
- Oil filter helps keep oil clean for increased engine life
- Automotive-type alternator (75 amp) provides plenty of charge to the battery.
- Rear-mounted, covered radiator and fan keeps noise away from the operator and is easy to service.
- Isolated engine mounting reduces engine vibration at operator's station for more comfortable operation.
Engine
Engine Manufacturer
3TNV88C
Engine Power
PS: 37.4 hp (27.5 kW)
Rated Engine Speed
Gross at 3,000 rpm
Cylinder Liners
Three
Displacement
100.2 cu in (1,642 cc)
Lubrication
Full pressure
Cooling
Liquid
Air Cleaner
Pre-cleaner Yes Heavy-duty canister, dry type with safety element and air-restriction indicator
Starter
Operator presence starting system: Brake-N-Go (foot)
Fuel System
Fuel Type
Diesel or Biodiesel (up to B20)
Fuel System
Fuel tank switch/shut-off valve
PTO
PTO Type
Drive: Internal wet disk clutch
Drivetrain
Drive System
Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor | Speed and direction control: Zero turn
Transmission
Hydrostatic
Clutch
Hydraulic clutch
Brakes
Brake System Type
Dynamic braking: Dual hand controlled levers | Park brake: Caliper disc brake | Park brake actuation: Hand lever
Wheels & Tires
Wheels
Caster wheels: 13x6.5-6 | Caster wheel: 15x6-6 flat free | Drive wheels: 26x12-12 square shoulder 4-ply turf
Front Wheel
LH, RH, Center
Rear Wheel
LH, RH, Center
Tires, Rear Specification
26x12-12 square shoulder 4-ply turf | Load rating: 4PR
Battery
Battery
12 V
Electric
Electrical
Cold cranking amp: At 18 degrees C, 490 amp | Hour meter: Digital multi-function display
Charging System
75 amp
Operational
Operating Conditions
Consumption: 1.1-1.9 U.S. gal./hr (4.2-7.2 L/hr)
Operating Speed
Side discharge: Approximately 18,000 fpm | Blade tip speed: Approximately 16,500 fpm | Speed range: 0-18.5 km/h (0-11.5 mph) | Forward: 0-18.5 km/h (0-11.5 mph) | Reverse: 0-8 km/h (0-5 mph)
Hydraulics
Oil Filter
Full flow, replaceable, spin-on type | Drivetrain: Spin-on Type
Dimensions
Cutting Width
60 in (152 cm)
Length
88.6 in (225 cm) (Varies by deck size) | 60-in. (152-cm) side-discharge: 96 in (244 cm)
Width
With chute down: 74, 86 in (188, 218 cm) | Rear discharge: 63.5, 75.8 in (161.3, 192.5 cm)
Height
With ROPs up: 85 in (216 cm) | With ROPS down: 48 in (122 cm) | Of-cut range: Increments: 0.25 in (0.64 cm) / 1.5-5 in (3.8-12.7 cm)
Dimensions
Mower deck size: 60-in (152-cm) | Blades Thickness: 0.25 in (0.64 cm)
Capacities
Hydraulic Capacity
3.2 U.S. gal. (12.1 L)
Fuel Capacity
Tank: 12 U.S. gal. ( 45.4 L)
Features
Crankcase: 3.8 U.S. qt (3.6 L)
Weights
Weight
1,960 to 2,100 lb (889 kg to 953 kg)
Features
Construction Material, Deck
7-gauge: 0.179-in (4.6-mm) one-piece forged steel
Features
Blade Number: Three | Mower deck: 7Iron™ PRO side-discharge
Warranty
Warranty
36 months or 1500 hours, whichever comes first, no hour limitation for the first 24 months.