2024 John Deere X500 Select Series X590 54-in. Deck
- Year 2024
- Make John Deere
- Model X500 Select Series
- Engine Model: FS730 EFI
2024 John Deere X500 Select Series X590 54-in. Deck
- 25.5-hp (19.0 kW) iTorque™ Power System
- Electronic throttle control and power two-wheel steer
Features may include:
V-twin engine has electronic fuel injection (EFI) and electronic throttle control for quick starts and superior performanceThe tractor is powered by a John Deere iTorque power system, a combination of engine features and an exclusive hood design providing superior lugging ability, even cooling, and durability. Key engine features include:
- 25.5 hp (19 kW)
- Large 44.3-cu in. (726-cc) displacement
- V-twin air-cooled design
- Excellent power and performance
- Smooth, quiet power
- Easy starts
Quality features include:
- Cast-iron cylinder liners
- Overhead valves
- Full-pressure lubrication
- Replaceable oil filter
- Dual-stage air cleaner
- Solenoid-shift starter for easy starts, even in cold weather
- Electronic fuel injection (EFI)
- EFI meters the correct amount of fuel directly into each engine cylinder for all operating conditions.
- It simplifies engine starts and warm-up by eliminating the need for the operator to use a choke.
- Fuel usage is reduced up to 10 percent compared to a carbureted engine.
- Electronic throttle control
- Electronic throttle control works in conjunction with EFI to electronically adjust the supply of fuel air mixture, to increase torque as needed to maintain engine operating speed under load.
- Ground speed and mower blade-tip speed remain constant, even in heavy-grass conditions, to improve productivity and cut quality.
- Mechanical governors cannot respond fast enough to maintain a constant engine speed.
- Some torque rise remains to warn the operator before the engine stalls.
- X590 Tractor's electronic throttle control is a first in the mowing industry.
No choke control is needed for the EFI engine because a servo motor controls the intake air butterfly valve and the air stream. For cold starts, the actuator closes the valve, making starting the engine easier - no choke lever is needed. Starts are quick and easy, even for inexperienced operators.
The advanced engine features provide the following advantages:
- Electronic throttle control improves performance.
- Mowing time is reduced as the electronic throttle control keeps the engine operating at optimum speed, responding instantaneously as the mower transitions from light to heavy mowing.
- Cut quality is improved, especially in difficult mowing conditions, because the electronic throttle control keeps the mower blades turning at full speed, delivering optimal cut quality and dispersion of clippings. While snow blowing, maintaining the fan speed enables consistent snow placement.
- EFI increases uptime.
- Fast, reliable starts are routine just like with a modern automobile. EFI automatically meters fuel, including the extra fuel needed to start a cold engine. Flooding by unnecessary choking of a warm engine is eliminated. No carburetor adjustments are needed at altitude.
- No choke-related problems since the choke is eliminated, thus ensuring operator confidence and quick starts, even in cold ambient temperatures (snow blower use). The mechanical throttle cable is replaced by an electric linkage that is not susceptible to wear or freezing.
- Cost of ownership is reduced.
- EFI precisely meters fuel to each engine cylinder.
Engine
Engine Power
25.5 hp (19 kW)
Engine
Model: FS730 EFI
Displacement
44.3 cu in.(726 cc )
Engine Type
Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter
Cylinder Liners
V-twin, cast-iron liners
Governor
Constant-speed electronic throttle control
Cooling
method: Air
Air Cleaner
Dry, replaceable with foam precleaner
Starter
Solenoid shift
Fuel System
Fuel Type
Gasoline | tank location: Rear
Fuel System
delivery: Open-loop electronic fuel injection (EFI)
Fuel Gauge Type
Gauge on dash
Drivetrain
Choke
speed control: No choke required
Steering
Power, hydraulic | Tilt wheel: five position
Drive System
Mower: Electric power take-off (PTO) clutch, in-line belt | Mower attachability: Dual belts
Brakes
Brake System Type
Internal wet disc
Wheels & Tires
Tires, Rear Specification
24x12-12 HDAP
Tires, Front Specification
16x6.5-8 turf
Wheels
Mower: Four
Battery
Battery
12 V / 340 CCA
Charging System
Flywheel alternator, regulated, 24 amp
Operational
Operating Speed
Forward: 0-7.2 mph (0-11.6 km/h) | Reverse: 0-5.2 mph (0-8.4 km/h)
Chassis
Frame Type
Welded heavy-duty
Chassis
mounting: Yes, heavy duty
Lights and Safety
Lighting
Headlights: Two standard, incandescent, 27 W | Taillights or reflector: Reflectors
Safety Features
Backup protection: Reverse Implement Option (RIO)
Dimensions
Dimensions
Fuel fill opening On left fender: 3 in. (7.6 cm) | Steering wheel: 14 in. (35.6 cm) | Fore-aft adjustment - While seated, ball bearing slide rail, 15-position: 6.6 in. (17 cm) | Mower deck material: 0.135 in. (10 gauge 3.4 mm) | Mower wheels rotate: 90 degrees for easy mower removal
Cutting Width
Accel Deep™ mower deck: 54 in. (137 cm)
Turning Radius
22 in. (55.9 cm) | Uncut circle: 24 in. (61 cm)
Seat Height
back: 21 in. (53 cm)
Height
Mower cut: 1-4 in. (13 positions, 2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm) | 52.7 in. (1338 mm)
Overall Length
77.4 in. (1966 mm)
Wheelbase
51.2 in. (1300 mm)
Width
with mower: 68.4 in. (1737 mm) | with mower (deflector raised for storage): 58.3 in. (1481 mm) | without mower: 40.7 in. (1034 mm)
Capacities
Fuel Capacity
tank: 4.4 U.S. gal. (16.7 L)
Towing Capacity
Maximum: 800 lb (363 kg)
Weights
Weight
bracket- front and rear - each holds up to four Quik-Tatch: 42 lb (19 kg) | 796 lb (361 kg)
Features
Features
Transaxle type: K72 hydrostatic integrated with transaxle | Transaxle control: Twin Touch™ pedals | Cruise control: Yes, button on dash | Primer/paint: E-coat/powder | Floor mats: Sure-grip rubber | Storage: Yes, covered toolbox | Fender handles/grips: Handles | Mower deck: Side discharge | Mower attachability: Roll under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Quick-pull pins
Oil Type
change: No-tools oil drain with replaceable filter | cooler: Fins and fan on transaxle | filter: Yes, replaceable
Lift Mechanism
Hydraulic | system type: Foot pedal with adjustable spring assist
Construction Material
Front axle: Cast iron front axle, front wheel ball bearings | Spindle bushings: Metal, replaceable | Hood: Fully enclosed, molded-in color material reduces sound, will not rust or dent | Mower deck: Forged steel deck shell
Construction Material, Deck
Fender: Stamped steel
Seat Type
Cut-and-sewn high-back | suspension: Six-position parallel arm
Adjustability
Mower Wheel: Seven-position, spring-loaded pin | Mower level: Exact Adjust ports and deck-leveling gauge
Warranty
Warranty
4 year/500 hour bumper-to-bumper