2024 John Deere X700 Signature Series X750

2024 John Deere X700 Signature Series X750

Swipe to View More

  • Year 2024
  • Make John Deere
  • Model X700 Signature Series
  • Engine Model: 3TNM74F
2024 John Deere X700 Signature Series X750

2024 John Deere X700 Signature Series X750

2024 John Deere X700 Signature Series X750

  • 24-hp (17.9 kW) 3-cylinder diesel engine
  • Power two-wheel steer, power lift system, Twin-Touch™ forward and reverse foot pedals
  • 4-year/700-hour bumper-to-bumper warranty
  • Available in 48-, 54-, and 60-inch mower deck sizes

Features may include:

Engine is 3-cylinder diesel for fuel economy and durability

A liquid-cooled, 3-cylinder diesel engine provides exceptional power, performance, fuel economy, and durability to handle commercial-use applications:

  • Large displacement provides exceptional torque
  • Cast-iron block improves noise absorption
  • Quality features include cast-iron cylinder liners, overhead valves, full-pressure lubrication, and replaceable oil filter
  • Solenoid-shift starter ensures easy starts, even in cold weather
  • High-energy glow plugs ensure quick starts in cold weather; an automatic sensing system tells the operator when the engine is ready to start
Mechanical fuel bleed eliminates the need for tools and fuel leaking onto the ground when bleeding the fuel system:
  • Simply pump the fuel pump that is located on the side of the engine
  • Electric fuel shutoff eliminates the need for a separate kill switch
  • Indirect injection with pre-combustion chambers provide smooth, quiet operation
Low exhaust emissions are certified to meet U.S. Environmental Protection Agency (EPA) and state of California standards for cleaner air:
  • Overhead valve design for efficient airflow
  • Swirl chamber combustion design for efficient combustion
  • Liquid cooled for more consistent operating temperatures
  • Closed crankcase ventilation recirculates and burns crankcase hydrocarbons
AIR-INTAKE SYSTEM

Engine intake air is drawn in through screened panels at the base of the pedestal and on the right and left sides of the tractor:

  • Cleanest and coolest area of the tractor
  • Pre-cleans the air to keep large chaff and debris from entering the radiator or air cleaner
  • Easy to clean and service so engine operates at optimum temperature
The diesel engine uses a heavy-duty cyclonic canister-type replaceable air filter:
  • Completely sealed for effective cleaning
  • Cyclone action that is designed to eject 90 percent to 95 percent of the dirt before it reaches the paper element
  • Secondary safety element that provides additional filtering
  • Total effective filter area of 512 sq in. (3303 sq cm)
An air filter restriction indicator is standard equipment:
  • Indicator light on the dash alerts the operator when the air filter is dirty and needs to be replaced
  • With a visual check, air filter daily service is simplified
  • Indicator extends the engine life by eliminating inadvertent dirt entry into the engine from over-servicing of the air filter
FUEL TANK HAS A LARGE 5.2-U.S. GAL. (19.7-L) CAPACITY

A large, 5.2-U.S. gal. (19.7-L) capacity fuel tank holds enough fuel for extended operation between refills:

  • Fuel-fill location is on the left fender for easy access, increased safety, fewer spills, and convenience during filling.
  • A fuel filter/separator with replaceable element includes a shutoff valve and is conveniently located on the front of the engine.
BATTERY AND ALTERNATOR ARE LARGE CAPACITY

A high-capacity, regulated alternator charging system provides plenty of power to quickly recharge the battery and run electrical equipment, such as lights or a sprayer:

Engine

Engine Power 24 hp (17.9 kW)
Engine Model: 3TNM74F
Displacement 60.6 cu in. (993 cc)
Engine Type Diesel, overhead valve, full-pressure lube, oil filter
Cylinder Liners Three, cast-iron liners
Governor Mechanical
Cooling method: Liquid
Air Cleaner Paper dry-type with primary and secondary elements
Starter Solenoid shift

Fuel System

Fuel Type Diesel | tank location: Rear
Fuel System delivery: In-line indirect injection
Fuel Gauge Type Gauge on dash

Drivetrain

Choke One lever
Steering Hydraulic power | Tilt wheel: six position
Drive System Mower: Hydraulic clutch, shaft | Mower attachability: Shaft or AutoConnect

Brakes

Brake System Type Internal wet disc

Wheels & Tires

Tires, Rear Specification 26x12-12 turf
Tires, Front Specification 18x8.5-8 turf
Wheels Mower: 48A, four and center front roller

Battery

Battery 12 V / 500 CCA
Charging System Engine-mounted alternator, regulated, 40 amp

Operational

Operating Speed Forward: 0-13.7 km/h (0-8.5 mph) | Reverse: 0-9.7 km/h (0-6 mph)

Hydraulics

Hydraulic Type outlets: Four

Chassis

Frame Type Welded heavy-duty
Hitch/Type Receiver: front

Lights and Safety

Lighting Headlights: Two standard, halogen, 37 W | Taillights or reflector: Taillights
Safety Features Backup protection: Reverse Implement Option (RIO)

Dimensions

Dimensions Fuel fill opening On left fender: 3 in. (7.6 cm) | Steering wheel: 14 in. (35.6 cm) | Fore-aft adjustment: 14-position, 7 in. (17.8 cm) | Mower deck material - 48A: 10 gauge 0.135 in. (3.4 mm) / 54 HC and 60 HC: 9 gauge 0.150 in. (3.8 mm) | Mower wheels rotate: 90 degrees for easy mower removal (48A), N/A (54 HC, 60 HC)
Cutting Width Accel Deep™ mower deck: 48 in. (122 cm) / High capacity mower deck: 54, 60 in. (137, 152 cm)
Turning Radius 25 in. (63.5 cm) | Uncut circle - 54 HC: 32 in. (81.3 cm) / 60 HC: 28 in. (71.1 cm)
Seat Height back: 21 in. (53.3 cm)
Height Mower cut: 1-5.25 in. (2.5-13.3 cm) | Cut increments: 0.25 in. (0.64 cm) | 54.5 in. (1384 mm)
Overall Length 75 in. (1905 mm)
Wheelbase 55.7 in. (1415 mm)
Width with mower - 48A: 62.5 in. (1588 mm) / 54 HC: 64.5 in. (1638 mm) / 60 HC: 74 in. (1880 mm) | with mower (deflector raised for storage) - 48A: 53.6 in. (1362 mm) / 54 HC: 57.5 in. (1461 mm) / 60 HC: 62 in. (1575 mm) | without mower: 47 in. (1195 mm)

Capacities

Fuel Capacity tank: 5.2 U.S. gal. (19.7 L)
Towing Capacity Maximum: 1,000 lb (454 kg)

Weights

Weight bracket - front - holds up to four Quik-Tatch weights: 42 lb (19 kg) | 942 lb (427 kg)

Features

Features Transaxle type: K90 hydrostatic integrated with transaxle | Transaxle control: Twin Touch™ pedals | Primer/paint: E-coat/powder | Floor mats: Sure-grip rubber | Storage: Covered toolbox | Fender handles/grips: Handles | Mower deck: Side discharge | Mower attachability: Roll under tractor (48A) / Drive-over deck (54, 60 HC) | Front draft arms: Overcenter | Rear draft arms: V-align
Lift Mechanism system type: Two-function hydraulic
Oil Type change: No tools | filter: Replaceable suction side 10 micron
Construction Material Front axle: JDM BA8 nodular iron casting | Spindle bushings: Metal, replaceable | Hood: Noryl GTX902, painted | Mower deck: Forged steel deck shell
Construction Material, Deck Fender: Stamped steel
Seat Type Two-piece adjustable seat with brand embroidery | suspension: Six-position parallel arm
Adjustability Fore-aft: While seated, slide rail | Mower wheel: Spring-loaded pin | Mower level: Exact Adjust ports and onboard deck-leveling gauge

Warranty

Warranty 4 year/700 hour bumper-to-bumper

Product Photography