2018 John Deere Engine & Drivetrains 6135HFG06 432-473 kW 60 Hz ( 1800 rpm )

2018 John Deere Engine & Drivetrains 6135HFG06 432-473 kW 60 Hz ( 1800 rpm )

13.5L Generator Drive Engine

Emissions Certifications

• CARB

• EPA Final Tier 4

Features may include:

• These engines use diesel oxidation catalyst (DOC) and selective catalytic reduction (SCR) technology to meet Final Tier 4 emission regulations. They meet customer performance without the need for a diesel particulate filter (DPF)

• Heavy-duty components that are usually found in our larger engines are used throughout our generator drive engine line. Many of our DOC/SCR engines feature top-liner cooling, steel pistons, and variable-speed fan drives

• Fresh air is first drawn into the low-pressure turbocharger (fixed geometry) and compressed to a higher pressure. The compressed air is then drawn into the high-pressure turbocharger (VGT), where the air is further compressed. The high-pressure air is then routed through a charge air cooler and into the engine's intake manifold. By splitting the work between two turbochargers, both can operate at peak efficiency and at slower rotating speeds — lowering stress on turbocharger components and improving reliability. Series turbocharging delivers more boost pressure than single turbocharger configurations which results in higher power density, improved low-speed torque, and improved high altitude operation

• EGR cools and mixes measured amounts of cooled exhaust gas with incoming fresh air to lower peak combustion temperatures, thereby reducing NOx

• The EUI fuel system provides higher injection pressures up to 2,350 bar (34,000 psi). It also controls fuel injection timing and provides precise control for start, duration, and end of injection

• The 4-valve cylinder head provides excellent airflow resulting in greater low-speed torque and better transient response

• This is the most efficient method of cooling intake air to help reduce engine emissions while maintaining low-speed torque, transient response time, and peak torque. It enables an engine to meet emissions regulations with better fuel economy and the lowest installed costs

• Lower installed cost

• Mounting points are the same as previous engine models

• Enables low idle speed for reduced fuel consumption

• Enables switching between 1500 and 1800 RPM without reprogramming

• Single engine control unit (ECU) manages both the engine and the aftertreatment systems

• Premium software option integrates with equipment or vehicles to reduce engineering and installation costs

• Low idle speeds

• Dual frequency 1500/1800 rpm

• Gear-driven auxiliary drives and water pump

• 500-hour oil change

• Self-adjusting poly-vee fan drive

• Replaceable (wet) cylinder liners

• Single piece low-friction steel pistons with integrated oil cooling gallery

• Directed top-liner cooling

• Low-pressure fuel system with electrical transfer pump and "auto-prime" feature