2018 John Deere Engine & Drivetrains 6090HF485 287-315 kW 60 Hz ( 1800 rpm )
- Year 2018
- Make John Deere Engine & Drivetrains
- Model 6090HF485 287-315 kW
- Engine Model: 6090HF485
2018 John Deere Engine & Drivetrains 6090HF485 287-315 kW 60 Hz ( 1800 rpm )
9.0L Generator Drive Engine
Emissions Certifications
- CARB
- EPA Tier 3
Features may include:
JET FUEL CAPABLE- The John Deere jet fuel capable engines run on military, arctic, and aviation fuel, including Jet A, Jet A-1, JP-5, and JP-8. If you need to switch back to diesel fuel, just fill up the tank and go
- Cools and mixes measured amounts of cooled exhaust gas with incoming fresh air to lower peak combustion temperatures, thereby reducing NOx
- Varies exhaust pressure based on load and speed to ensure proper EGR flow and best-in-class fuel economy
- The HPCR fuel system provides variable common-rail pressure, multiple injections, and higher injection pressures up to 1,600 bar (23,000 psi). It also controls fuel injection timing and provides precise control for the start, duration, and end of injection
- The 4-valve cylinder head provides excellent airflow by utilizing a cross-flow design
- This is the most efficient method of cooling intake air to help reduce engine emissions. It enables an engine to meet emissions regulations with better fuel economy and the lowest installed costs
- Horsepower/displacement ration is best-in-class
- Lower installed cost
- Mounting points are the same as previous engine models
- Electronic engine controls monitor critical engine functions, providing warning and/or shutdown to prevent costly engine repairs and eliminate the need for add-on governing components, all lowering total installed costs
- Self adjusting poly-vee fan drive
- Single-piece low-friction steel piston
- Low-pressure fuel system with electrical transfer pump and "auto-prime" feature
- Directed top-liner cooling
Engine
Engine
Model: 6090HF485
Cylinder Liners
6
Displacement
9.0 L (549 cu in)
Bore
118.4 mm (4.66 in)
Stroke
136 mm (5.35 in)
Compression Ratio
16.0 : 1
Engine Type
In-line, 4-Cycle
Aspiration
Turbocharged and air-to-air aftercooled
Top Speed
60 Hz ( 1800 rpm )
Engine Power
Prime: 245 kW (328 hp) | Standby: 269 kW (361 hp)
Operational
Generator
Efficiency: 90-94 % | Calculated generator set output - Prime: 213-223 kWe (267-279 kVa) | Calculated generator set output - Standby: 235-245 kWe (294-307 kVa)
Operating Conditions
Power Factor: 0.8 | Rated Fan Power: 16.1 kW (21.6 hp)
Dimensions
Length
1211 mm (47.7 in)
Width
633 mm (24.9 in)
Height
1260 mm (49.6 in)
Weights
Dry Weight
1096.8 kg (2418 lb)