2018 John Deere Engine & Drivetrains 4045TF285 (84 - 99 hp) Base

2018 John Deere Engine & Drivetrains 4045TF285 (84 - 99 hp) Base

Swipe to View More

  • Year 2018
  • Make John Deere Engine & Drivetrains
  • Model 4045TF285 (84 - 99 hp)
  • Engine Model: 4045TF285
2018 John Deere Engine & Drivetrains 4045TF285 (84 - 99 hp) Base

2018 John Deere Engine & Drivetrains 4045TF285 (84 - 99 hp) Base

2018 John Deere Engine & Drivetrains 4045TF285 (84 - 99 hp)

4.5L Industrial Diesel Engine

Emissions Certifications

  • CARB
  • EPA Tier 3
  • EU Stage III A
  • MSHA

Features may include:

2-valve cylinder head
  • Cross flow head design that provides excellent breathing from a lower cost two-valve cylinder head
High-pressure common-rail (HPCR) and engine control unit (ECU)
  • The HPCR fuel system provides variable common-rail pressure, multiple injections, and higher injection pressures, up to 1600 bar (23,000 psi). It also controls fuel injection timing and provides precise control for the start, duration, and end of the injection
Fixed geometry turbocharger
  • Fixed geometry turbochargers are sized for a specific power range and optimized to provide excellent performance across the entire torque curve. They are also designed to maximize fuel economy between the engine's rated speed and peak torque
Multiple injection strategy
  • The new HPCR fuel system and engine control unit (ECU) allow for multiple fuel injections. The number of fuel injections, based on speed and load, help contribute to lower combustion temperatures, which reduce the formation of NOx and particulates. The multiple injection strategy also provides an added benefit of noise reduction
John Deere electronic engine controls
  • PowerTech E engines offer electronically controlled fuel systems with improved cold-start performance, precise engine speed control, torque curve shaping and more. Because these systems have less need for redundant sensors, add-on electronic governors, and shutdown devices - they result in a lower total installed cost
Engine performance
  • New power bulge feature
  • Increased low-speed torque
  • New higher-peak torque ratings
  • Faster torque rise
  • Lower-rated speeds available for reduced noise and improved fuel economy
Compact size
  • Mounting points are the same as Tier 2/Stage II engine models
Additional features
  • Self-adjusting poly-vee fan drive
  • Forged-steel connecting rods
  • Replaceable wet-type cylinder liners
  • Either-side service
  • 500-hour oil change
  • Standard gear auxiliary drive

Engine

Engine Model: 4045TF285
Cylinder Liners 4
Displacement 4.5 L (275 cu in)
Bore 106 mm (4.17 in)
Stroke 127 mm (5.00 in)
Compression Ratio 19.0:1
Engine Type In-line, 4-Cycle
Aspiration Turbocharged
Engine Power Heavy Duty - Rated: 63.6-74 kW (85-99 hp) @2200-2400 rpm | Heavy Duty - Peak: 65-74 kW (87-99 hp) @2000-2400 rpm
Engine Torque Heavy Duty - Peak: 353-354 N·m (260-261 ft-lb) @1600 rpm | Heavy Duty - Torque rise: 20-29%

Operational

Operating Conditions Heavy Duty - Power bulge: 0-3 % @1900 rpm

Dimensions

Length 867 mm (34.1 in)
Width 680 mm (26.8 in)
Height 1055 mm (41.5 in)

Weights

Dry Weight 491 mm (1082 lb)

Product Photography