2023 Landoll 2100 Series Coulter Chisel Auto-Reset Shanks 2132-23

2023 Landoll 2100 Coulter Chisel Auto-Reset Shanks 2132-23

The coulter chisel concept has been used for decades as an alternative primary tillage practice. The newly redesigned Landoll 2100 Series Coulter Chisel incorporates this concept into high capacity. This translates to handling heavy residue at higher speeds with maximum efficiency. Cover more acres per hour using less horsepower per foot than conventional disc rippers.

Available in sizes with 9 to 25 shanks allowing for cutting widths of 11’3” to 31’3”, these models will work with a wide range of tractor sizes and provide ultimate productivity for nearly any operation. Residue is sized every 7 ½” with the front 22” cutting coulters. Compaction is eliminated and residue is blended in with the heavy-duty shanks spaced at 15”. Shanks are mounted on staggered bars allowing residue to easily flow through the machine. In addition, shanks are arranged to follow a coulter and have one in between each for optimum residue sizing.

The high-clearance shanks offer 32” of underframe clearance and are available in auto-reset or rigid shear bolt configurations. The auto-reset shank assemblies provide 1,750 pounds of point load, a 14” trip height, and the point angle can be adjusted to 50 or 60 degrees. Twisted shovels or straight points are offered to complete the shank assemblies.

The 2100 Series Coulter Chisel offers single point depth control at the front of the machine. Hydraulically controlled coulters allow for “on the go” adjustments to meet changing conditions right from the comfort of the tractor cab. The self-leveling hitch provides a “set it and forget it” adjustment that maintains level operation from front to rear. The updated design features fewer moving parts to help reduce downtime in the field and adjustments are simple to make, further increasing efficiency.

• Size Heavy Residue and Eliminate Compaction

• 22” Coulters on 7 ½” Spacing with Depth Gauge Indicator

• 1 ¾” Gang Bolt

• 5 ¾” Solid Cast Spools

• C-Cushion Bearing Standards with Trunnion Bearings with Triple Lip Seal

• Scraper Mounted Bracket Attached to C-Cushion Bearing Standard

• Auto-Reset Shank Assemblies with 1,750 lb. Point Load, 14” Trip Height, 32” Under Frame Clearance, Adjustable 50 or 60 Degree Point Angle

• Rigid Shear Bolt Shanks with 32” Under Frame Clearance

• Choice of Twisted Shovels or Straight Points

• 5 ½” Lift Axles with Maintenance Free Lift System

• Walking Tandems with Greaseable Bearings on all Sizes

• 340/65R x 18 Radial Tires with 8-Bolt Hubs and 3” Slip-In Spindles on Rigid Models and Wings of Folding Units

• 400/60R x 18 Radial Tires with 8-Bolt Hubs and 3 ¼” Slip-In Spindles on Center Sections of Folding Units

• Self-Leveling Hitch with Manual Adjustment

• Single Point, Front Mounted Depth Control

• Adjustment and Gang Wrench

• Sapphire Blue Powder Coat Paint