2023 Landoll 343A 343A-39

2023 Landoll 343A 343A-39

Landoll’s all new Model 343A brings together decades of experience from working in the storage container industry. Today’s demands to move standard ISO 20' and 40' boxes are easy. However, add the ISO and domestic high-cube along with the never-ending customized lengths of boxes to an application, and you need a trailer that can move them all. The Model 343 will do just that.

The 343A is available in 43', 46', or 50' models. The 43' gives the operator the greatest maneuverability while handling up to a 45' high cube**. If you are needing to handle 48' boxes, choose the 46' model. If you have domestic 53' high cube boxes in your fleet, then choose the 343A-50**. Match the length with the containers you are moving.

The 343A is standard with the Chain Drive Load System but if your drivers like a winch cable system, then choose from a 12,000 or 20,000 lb. Warn winch. The trailer stays the same, you choose how you want to load boxes. The standard handling package is also complete with a chain loading bridle, rear tie-downs/binders and push bar. There is a standard inside corner casting guide, and you can choose to add two-position outside guide panels.

Features may include:

• Capacity: 10,000 lbs.

• Deck Rating: 10,000 lbs. in 10'

• Estimated Base Weight: 16,000 lbs. (50') +/-3%

• Main Frame: Fabricated 80,000 PSI Yield Beams

• Crossmembers: 3" Jr. I Beam on 12" and 24" Centers

• Pin Setting: 43" Set-Back, 75" CA Tractor Minimum; 18.5" Setting

• Swing Clearance: 78" Rear and Forward Swing Clearance

• Deck Width: 102"

• Loaded Deck Height: 45" at Rear Approach Plate

• Decking: 1/8" Steel Tread Plate, 10" Recessed Trough – Full Length, Skid Plate 10" Wide / Side Outer Frame 6-1/2" Tall, 4" Bottom Flange

• Load Angle: 12°

• Accessories: Inner Receiver Bushing on 24" Centers for Side Guides, Hi-Cube Container Low-Profile, Centralized Grease System, Two-Stage Powder Coat Paint, 29" Approach Plate with (4) Keyhole Tie Downs and Shoe LockDown Slots, Wireless Remote Control Hydraulics

• Tool Box: (1) Street 42"W x 28"D x 9"H with Lockable Door

• Tie Downs: Double Keyhole Chain Slots 24" Centers on Outer Beam

• Parking Stands: Jost Two Speed Landing Gear

• Suspension: Neway Air Ride RLU228, 22,500 lb. Capacity

• Axles: (1) 25,000 lbs. Dual Tire, Oil Bath Bearings (RTAC Legal Width), Automatic Slack Adjusters

• Axles Prepped for Air Inflation

• Brakes: 16.5×7 Full Air / Spring Brakes, ABS 2S1M

• Tires: 255/70R 22.5 LRH Double Coin

• Rims: 22.5×8.25 Tubeless

• Wheels: Hub Pilot Wheel / Steel Outboard Brake Drum

• Oil Seal Hubs: Internal Mated Assembly

• Hydraulic Hook Up: Quick Couplers 2,500 PSI – 20 GPM at Controls, 50 GPM Max

• Hydraulic Winch: Gear Box, 12,000 lb., with Continuous Power Chain Drive Load System 1/2" Chain

• Hydraulic Valve Body: Rexroth

• Air / Electrical: 7-Way Receptacle

• Lights: Grote Clear Lens LED with Chrome Bezel (10-Year Warranty)

• Wiring Harness: Grote “Xtreme” Wiring Harness (7-Year Warranty)

• Turn Signal: Center Mounted Turn Signal