2020 Rhino Equipment Cold Planers RCP1000W
- Year 2020
- Make Rhino Equipment
- Model Cold Planers
- Engine Model: SC8D190G2B1
2020 Rhino Equipment Cold Planers RCP1000W
Rhino® Cold Planers put the tons in the trucks hour after hour, shift after shift. Production is not just about horsepower. It’s how the cold planer delivers the power to the rotor.
Our cold planers offer solid design features, systems that are simple to troubleshoot, and low cost of operation, made for commercial applications and narrow milling projects. Unique cutter housing design gives efficient material evacuation at any cut depth and width. Versatile and productive.
Rhino® cold planers has a head which can be used much like a drill to break up material so that it can be removed. The angle and depth can be adjusted to allow the cold planer to cut down to precisely the desired depth.
Features may include:
- Our cold planers offer solid design features, systems that are simple to troubleshoot, and low cost of operation, made for commercial applications and narrow milling projects. Unique cutter housing design gives efficient material evacuation at any cut depth and width. Versatile and productive.
- Independent elevating control of left and right wheels for quick adjustment of milling depth and curb milling. Easy access doors provide convinient access for the operator to change tools for asphalt or concrete milling.
- Full hydraulic travel and braking systems provide immediate response for effectiveness and safety. The hydrostatic closed loop system gives excellent power to weight ratios.
- Diesel Engine provides excellent power, reliability, and efficiency in adverse working conditions. Conveniently placed filters allow for easy maintenance.
Engine
Engine Manufacturer
Rhino®
Engine
Model: SC8D190G2B1
Engine Power
Net Power 140 kW (188 Hp) @ 2,200 rpm
Displacement
8.3 L (506 cu. In)
Emissions
Tier 2
Lubrication
Full-flow spin-on filter
Aspiration
Turbocharged
Air Cleaner
Under-hood, dual element dry type
Fuel System
Fuel System
Direct Injection
Drivetrain
Drive System
Hydraulically activated by operator, Heavy-Duty clutches
Brakes
Brake System Type
Hydrostatic closed-loop system provides dynamic braking
Parking Brake
Manually activated, Drum mounted on transmission output shaft
Wheels & Tires
Tires, Front Specification
Tire Diameter Front: 660 mm (26 in) | Front Wheel to Front of Machine: 850 mm (2.8 ft)
Electric
Electrical
24 Volts
Alternator
70 Amp, 120 Ah
Operational
Operating Speed
Milling: 15 m/min (591 in/min) | Speed @2,200 rpm: 116 rpm
Top Speed
Max. Travel: 13.0 kmh (8 mph)
Hydraulics
Hydraulic Pump
Gear Pump, Constant displacement
Maximum Pressure
System: 35 Mpa (5,076 psi )
Dimensions
Cutting Width
1000 mm (39 in)
Depth, Maximum
Cutting: 150 mm (5.9 in)
Rotor Diameter
720 mm (28 in)
Dimensions
Tool Spacing (tip): 15 mm (0.6 in) | Swing: 30 degrees (15 degrees each side) | Max. Truck Clearance: 3,500 mm (11.5 ft)
Width
350 mm (14 in) | Base Machine: 2,430 mm (8.0 ft) | Conveyor: 1,000 mm (3.3 ft)
Height
Max. Feeding: 3,500 mm (11 ft) | Max. Canopy Raised: 3,100 mm (10.2 ft) | Min. No Canopy: 2,650 mm (8.7 ft) | Base Machine: 3,100 mm (10.2 ft) | Conveyor: 780 mm (2.6 ft)
Overall Length
Conveyor Up: 10,642 mm (34.9 ft)
Length
Without Conveyor: 3,815 mm (12.5 ft) | Base Machine: 5,100 mm (16.7 ft) | Conveyor: 7,535 mm (24.7 ft)
Overall Width
2,325 mm (7.6 ft)
Wheelbase
2,480 mm (8.1 ft)
Capacities
Volume
Theoretical Capacity: 84.1 m3/h (110 yd3/h)
Fuel Capacity
Tank: 240 L (63 gal)
Cooling
20 L (5 gal)
Oil capacity
Engine: 18 L (5 gal)
Load Capacity, Water
Tank: 350 L (92 gal)
Hydraulic Capacity
Tank: 300 L (79 gal)
Features
Features
Fan Drive: Belt driven | Number of tools: 92 | Water Spray System: Pressurized water spray system ensures dust control and belt lubrication, Flat pattern spray provides better cleaning performance
Conveyor Type
Hydraulically driven for maximum productivity