2020 Rhino Equipment Cold Planers RCP2100T
- Year 2020
- Make Rhino Equipment
- Model Cold Planers
- Engine Model: QSX15
2020 Rhino Equipment Cold Planers RCP2100T
Rhino® Cold Planers put the tons in the trucks hour after hour, shift after shift. Production is not just about horsepower. It’s how the cold planer delivers the power to the rotor.
Our cold planers offer solid design features, systems that are simple to troubleshoot, and low cost of operation, made for commercial applications and narrow milling projects. Unique cutter housing design gives efficient material evacuation at any cut depth and width. Versatile and productive.
Rhino® cold planers has a head which can be used much like a drill to break up material so that it can be removed. The angle and depth can be adjusted to allow the cold planer to cut down to precisely the desired depth.
Features may include:
- Our cold planers offer solid design features, systems that are simple to troubleshoot, and low cost of operation, made for commercial applications and narrow milling projects. Unique cutter housing design gives efficient material evacuation at any cut depth and width. Versatile and productive.
- Independent elevating control MOBA system with two longitudinal axes and one transverse digital leveling system.
- Four track drive with 26 track-plates for each track, four independent elevating column of hydraulic cylinders.
- Two stage front loading, foldable discharge belt conveyor system with independent control switches for both stages on the forward/reverse functions with seamless speed controls. Height of discharge adjustable up to maximum 4,700mm and 40 degree swing to both left and right.
Engine
Engine Manufacturer
Cummins
Engine
Model: QSX15
Engine Power
Net Power 447 kW (599 Hp) @ 2,200 rpm
Displacement
15 L (915 cu. In)
Emissions
Tier 2
Lubrication
Full-flow spin-on filter
Aspiration
Turbocharged
Air Cleaner
Under-hood, dual element dry type
Fuel System
Fuel System
Direct Injection
Drivetrain
Drive System
Hydraulically activated by operator, Heavy-Duty clutches
Brakes
Brake System Type
Hydrostatic closed-loop system provides dynamic braking
Parking Brake
Manually activated, Drum mounted on transmission output shaft
Electric
Electrical
24 Volts
Alternator
70 Amp, 120 Ah
Operational
Operating Speed
Milling: 25 m/min (984 in/min) | Speed @2,200 rpm: 96 rpm
Top Speed
Max. Travel: 6.0 kmh (4 mph)
Hydraulics
Hydraulic Pump
Gear Pump, Constant displacement
Maximum Pressure
System: 28 Mpa (4,061 psi )
Dimensions
Cutting Width
2,100 mm (83 in)
Depth, Maximum
Cutting: 320 mm (12.6 in)
Rotor Diameter
1,070 mm (42 in)
Dimensions
Tool Spacing (tip): 15 mm (0.6 in) | Swing: 80 degrees (40 degrees each side) | Max. Truck Clearance: 4,700 mm (15.4 ft) | From Center Front Track to Center Rear Track: 4,750 mm (15.6 ft) | Front Center Rear Track to Rear of Machine: 1,210 mm (4.0 ft) | From Center Rear Track to Center of Rotor: 2,100 mm (6.9 ft)
Width
800 mm (31 in)
Height
Max. Feeding: 4,700 mm (15 ft) | Max. Canopy Raised: 4,120 mm (13.5 ft) | Canopy Lowered: 3,222 mm (10.6 ft) | Min. No Canopy: 3,109 mm (10.2 ft)
Overall Length
Conveyor Up: 14,355 mm (47.1 ft)
Length
Without Conveyor: 7,390 mm (24.2 ft)
Overall Width
2,840 mm (9.3 ft)
Wheelbase
2,480 mm (8.1 ft)
Gauges
Track: 1,500 mm (4.9 ft)
Capacities
Fuel Capacity
Tank: 1,320 L (349 gal)
Cooling
90 L (24 gal)
Oil capacity
Engine: 80 L (21 gal)
Load Capacity, Water
Tank: 3,500 L (925 gal)
Hydraulic Capacity
Tank: 300 L (79 gal)
Features
Features
Fan Drive: Belt driven | Number of Tracks: 4.0 | Number of tools: 170 | Water Spray System: Pressurized water spray system ensures dust control and belt lubrication, Flat pattern spray provides better cleaning performance
Conveyor Type
Hydraulically driven for maximum productivity