2020 Rhino Equipment Excavators REX130

2020 Rhino Equipment Excavators REX130

Swipe to View More

  • Year 2020
  • Make Rhino Equipment
  • Model Excavators
  • Engine Cummins Model: 4BT3
2020 Rhino Equipment Excavators REX130

2020 Rhino Equipment Excavators REX130

2020 Rhino Equipment Excavators REX130

The Rhino® excavator is the solution to meet today´s requirements in high performance, maximum uptime, and low cost operation. Designed to keep you competitive, these excavators let you finish the job faster and put more profit in your pocket.

Industry leading fuel efficiency, ergonomic work environment, more comfortable for the operator. New cab design creates a safer work environment. Environmentally friendly – low emission levels, low noise, and more than 95% of the machine is recyclable.

Features may include:

  • This Rhino® excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A high-efficiency “on-demand” cooling system, advanced multifunction monitor, and productivity modes to allow you to choose your digging style headline the long list of advances.
  • Ergonomically correct short-throw pilot levers provide smooth, predictable fingertip control with less movement or effort.
  • With large idlers, rollers, and strutted links, the sealed and lubricated undercarriage delivers long and reliable performance.
  • Generous flow, and swing torque help speed cycles. So you can do your best to stay on schedule or ahead of the weather. Rhino® excavators come standard with the hydraulic line for attachments. Attachments include hydraulic hammers, thumb cutters, and many more.

Engine

Engine Manufacturer Cummins or Rhino®
Engine Cummins Model: 4BT3
Emissions Rating: Tier 2
Cylinder Liners 4
Displacement 3.9 L (238 cu. In)
Engine Power Net Power 86 kw (115 hp)@ 2,200 rpm
Ignition Fuel System: Direct Injection
Aspiration Turbocharged, air-to-air charge air cooler
Bore Boom (2): 105 mm (4.1 in) | Arm (1): 115 mm (4.5 in) | Bucket (1): 95 mm (3.7 in)
Stroke Boom (2): 990 mm (39.0 in) | Arm (1): 1,175 mm (46.3 in) | Bucket (1): 885 mm (34.8 in)
Engine Torque 27,220 Nm (20,076 lb-ft)

Drivetrain

Drive System Power Train: Dual speed mode for tracks on-dash one-button activation

Operational

Operating Speed Maximum Travel Speeds Low: 3 kph (2 mph) | Maximum Travel Speeds High: 5 kph (3 mph) | Swing Mechanism: 12.6 rpm
Ground Pressure Triple Semi-Grouser (500mm) (20 in) Shoes: 38 Kpa (5.5 psi)
Operating Conditions Arm Digging Force: 64 kN (14,388 lb) | Bucket Digging Force: 80 kN (17,985 lb)

Hydraulics

Hydraulic Type System: Open center, load sensing; two variable-displacement axial-piston pumps
Maximum Pressure Pressure: 24.5 Mpa (3,553 psi) | Power Boost Mpa (psi): 25(3,553)
Hydraulic Flow Max. Flow L/min (gpm) (each): 46(12)

Dimensions

Track Width 500 mm (19.7 ft)
Dimensions Max. Reach: 8,390 mm (27.5 ft) | Max. Reach at Ground Level: 8,180 mm (26.8 ft) | Max. Vertical Wall: 4,940 mm (16.2 ft) | Tail Swing Radius: 2,015 mm (6.6 ft) | Swing Radius: 2,015 mm (6.6 ft) | Rod Diameter Boom (2): 65 mm (2.6 in) | Rod Diameter Arm (1): 60 mm (2.4 in) | Rod Diameter Bucket (1): 55 mm (2.2 in)
Length Arm: 2,500 mm (8.2 ft) | Track on Ground: 2,750 mm (9.0 ft) | Undercarriage: 3,486 mm (11.4 ft)
Depth, Maximum Max. Digging Depth: 5,500 mm (18.0 ft) | Max. Digging Depth at 2,440 mm (8 ft) Falt Bottom: 5,305 mm (17.4 ft)
Height Max. Cutting: 8,630 mm (28.3 ft) | Max. Dumping: 6,180 mm (20.3 ft) | Cab: 2,813 mm (9.2 ft)
Overall Length Overall Length with 3,050 mm (10 ft) Arm: 7,600 mm (24.9 ft)
Overall Height Overall Height with 3,050 mm (10ft) Arm: 2,780 mm (9.1 ft)
Ground Clearance Counterweight Clearance: 870 mm (2.9 ft)
Width Upperstructure: 2,490 mm (8.2 ft) | Gauge: 1,960 mm (6.4 ft)
Overall Width Triple Semi-Grouser 500 mm (20 in) Shoes: 2,460 mm (8.1 ft)

Capacities

Drawbar Capacity Pull: 8,000 kg (17,637 lb)
Fuel Capacity Fuel Tank: 247 L (65 gal)
Cooling System 14 L (4 gal)
Oil capacity Engine: 11 L (3 gal)
Hydraulic Capacity System: 145 L (38 gal) | Tank: 90 L (24 gal)
Features Swing Mechanism: 0.5 L (0.1 gal) | Final Drive Case (each): 2.6 L (0.7 gal)

Weights

Weight Base: 13,000 kg (28,660 lb) | Triple Semi Grouser 700mm (28 in) Shoes: 5,094 kg (11,230 lb) | One-Piece Boom: 1,088 kg (2,399 lb) | 3,050 mm (10 ft): 525 kg (1,157 lb) Boom Lift Cylinders (2), Total: 186 kg (410 lb) 1.0 m3 (1.3 cu. Yd) Bucket: 370 kg (816 lb) Counterweight, Standard: 2,450(5,401) | Lift Over End at 15' Radius, Ground Level: 5,420 kg (11,949 lb) | Lift Over End at 20' Radius, Ground Level: 3,710 kg (8,179 lb) | Lift Over Side at 15' Radius, Ground Level: : 3,710 kg (8,179 lb) | Lift Over Side at 20' Radius, Ground Level: 2,490 kg (5,490 lb)
Weight, In Running Order With full fuel tank; 79 kg (175lb) operator; 0.3 m3 (0.4 cu. Yd), general purpose bucket; 500 mm (20 in) shoes; and 1,650 mm (5.4 ft) arm

Features

Features Control: 2 pilot levers, low-effort hydraulic controls with horn and boost bottons | Carrier Rollers (each side): 2 | Track Rollers (each side): 7 | Shoes (each side) Triple Semi-Grousers: 42
Track Type Adjustment: Hydraulic | Guides: Front Idler | Chain: Sealed and lubricated

Product Photography