2020 Rhino Equipment Excavators REX18

2020 Rhino Equipment Excavators REX18

Swipe to View More

  • Year 2020
  • Make Rhino Equipment
  • Model Excavators
2020 Rhino Equipment Excavators REX18

2020 Rhino Equipment Excavators REX18

2020 Rhino Equipment Excavators REX18

The Rhino® excavator is the solution to meet today´s requirements in high performance, maximum uptime, and low cost operation. Designed to keep you competitive, these excavators let you finish the job faster and put more profit in your pocket.

Industry leading fuel efficiency, ergonomic work environment, more comfortable for the operator. New cab design creates a safer work environment. Environmentally friendly – low emission levels, low noise, and more than 95% of the machine is recyclable.

Features may include:

  • This Rhino® excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A high-efficiency “on-demand” cooling system, advanced multifunction monitor, and productivity modes to allow you to choose your digging style headline the long list of advances.
  • Ergonomically correct short-throw pilot levers provide smooth, predictable fingertip control with less movement or effort.
  • The standard rubber track lets you work on multiple surfaces such as grass, pavement or stone without damaging the surface or machine.
  • Generous flow, and swing torque help speed cycles. So you can do your best to stay on schedule or ahead of the weather. Rhino® excavators come standard with the hydraulic line for attachments. Attachments include hydraulic hammers, thumb cutters, and many more.

Engine

Engine Manufacturer Rhino®
Emissions Rating: Tier3
Cylinder Liners 3
Displacement 1.3 L (79 cu. In)
Engine Power 18.4 kw (25 hp)@2,350 rpm
Ignition Fuel System: Direct Injection
Aspiration Naturally Aspirated

Drivetrain

Drive System Power Train: Dual speed mode for tracks on-dash one-button activation

Operational

Operating Speed Maximum Travel Speeds Low: 2.2 kph (1.4 mph) | Maximum Travel Speeds High: 3.8 kph (2.4 mph) | Swing Mechanism: 10 rpm
Ground Pressure Rubber Tracks Kpa (psi): 29(4.2)
Operating Conditions Arm Digging Force: 8.3 kN (1,866 lb) | Bucket Digging Force: 11.4 kN (2,563 lb)

Hydraulics

Hydraulic Type System: Open center, load sensing; dual gear pumps
Maximum Pressure Pressure: 16 Mpa (2,321 psi)
Hydraulic Flow Max. Flow L/min (gpm) (each): 35(9.2)

Dimensions

Track Width Rubber: 230 mm (9.1 in) | 230 mm (9.1 in)
Dimensions Max. Reach: 3,720 mm (12.2 ft) | Max. Reach at Ground Level: 3,640 mm (11.9 ft) | Min. Swing Radius: 1,640 mm (5.4 ft) | Swing Radius: 1,200 mm (3.9 ft)
Length Arm: 900 mm (3.0 ft) | Track on Ground: 1,185 mm (3.9 ft) | Undercarriage: 1,560 mm (5.1 ft)
Depth, Maximum Max. Digging Depth: 1,980 mm (6.5 ft)
Height Max. Cutting: 3,150 mm (10.3 ft) | Max. Dumping: 2,070 mm (6.8 ft) | Top of Cab: 2,247 mm (7.4 ft)
Overall Length Transport: 2,380 mm (7.8 ft)
Overall Height 1,345 mm (4.4 ft)
Ground Clearance Min. 212 mm (8.3 in) | Counterweight Clearance: 467 mm (1.5 ft)
Width Upperstructure: 960 mm (3.1 ft) | Undercarriage: 1,100 mm (3.6 ft)

Capacities

Fuel Capacity Fuel Tank: 28 L (7 gal)
Cooling System 4 L (1 gal)
Oil capacity Engine: 6 L (2 gal)
Hydraulic Capacity Tank: 55 L (15 gal)

Weights

Weight Base: 1,760 kg (3,880 lb)
Weight, In Running Order With full fuel tank; 79 kg (175lb) operator; 0.04 m3 (0.05 cu. Yd) general purpose bucket; 230 mm (9.1 in) rubber tracks; and 900 mm (3.0 ft) arm

Features

Features Control: 2 Pilot levers, low-effort hydraulic controls with horn

Product Photography