2020 Rhino Equipment Excavators REX210
- Year 2020
- Make Rhino Equipment
- Model Excavators
- Engine Cummins Model: 6BT5
2020 Rhino Equipment Excavators REX210
The Rhino excavator is the solution to meet today´s requirements in high performance, maximum uptime, and low cost operation. Designed to keep you competitive, these excavators let you finish the job faster and put more profit in your pocket.
Industry leading fuel efficiency, ergonomic work environment, more comfortable for the operator. New cab design creates a safer work environment. Environmentally friendly – low emission levels, low noise, and more than 95% of the machine is recyclable.
Features may include:
- This Rhino excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A high-efficiency “on-demand” cooling system, advanced multifunction monitor, and productivity modes to allow you to choose your digging style headline the long list of advances.
- Ergonomically correct short-throw pilot levers provide smooth, predictable fingertip control with less movement or effort.
- With large idlers, rollers, and strutted links, the sealed and lubricated undercarriage delivers long and reliable performance.
- Generous flow, and swing torque help speed cycles. So you can do your best to stay on schedule or ahead of the weather. Rhino® excavators come standard with the hydraulic line for attachments. Attachments include hydraulic hammers, thumb cutters, and many more.
Engine
Engine Manufacturer
Cummins or Rhino®
Engine
Cummins Model: 6BT5
Emissions
Rating: Tier 2
Cylinder Liners
6
Displacement
5.9 L (360 cu. In)
Engine Power
Net Power 112 kw (150 hp)@ 2,200 rpm
Ignition
Fuel System: Direct Injection
Aspiration
Turbocharged, air-to-air charge air cooler
Bore
Boom (2): 120 mm (4.7 in) | Arm (1): 135mm (5.3 in) | Bucket (1): 115 mm (4.5 in)
Stroke
Boom (2): 1,285 mm (50.6 in) | Arm (1): 1,175 mm (46.3 in) | Bucket (1): 1,120 mm (44.1 in)
Engine Torque
67,100 Nm (49,490 lb-ft)
Drivetrain
Drive System
Power Train: Dual speed mode for tracks on-dash one-button activation
Operational
Operating Speed
Maximum Travel Speeds Low: 4 kph (2 mph) | Maximum Travel Speeds High: 5 kph (3 mph) | Swing Mechanism: 11.7 rpm
Ground Pressure
Triple Semi-Grouser (500mm) (20 in) Shoes: 49 Kpa (7.1 psi)
Operating Conditions
Arm Digging Force: 109 kN (24,504 lb) | Bucket Digging Force: 114 kN (25,628 lb)
Hydraulics
Hydraulic Type
System: Open center, load sensing; two variable-displacement axial-piston pumps
Maximum Pressure
31 Mpa (4,554 psi) | Power Boost Mpa (psi): 34(4,975)
Hydraulic Flow
Max. Flow L/min (gpm) (each): 226(60)
Dimensions
Track Width
700 mm (27.6 ft)
Dimensions
Max. Reach: 10,173 mm (33.4 ft) | Max. Reach at Ground Level: 9,993 mm (32.8 ft) | Max. Vertical Wall: 5,915 mm (19.4 ft) | Min. Swing Radius: 3,974 mm (13.0 ft) | Tail Swing Radius: 2,838 mm (9.3 ft) | Swing Radius: 2,809 mm (9.2 ft) | Rod Diameter Boom (2): 65 mm (2.6 in) | Rod Diameter Arm (1): 60 mm (2.4 in) | Rod Diameter Bucket (1): 55 mm (2.2 in)
Length
Arm: 3,050 mm (10.0 ft) | Track on Ground: 3,445 mm (11.3 ft) | Undercarriage: 4,256 mm (14.0 ft)
Depth, Maximum
Max. Digging Depth: 6,930 mm (22.7 ft) | Max. Digging Depth at 2,440 mm (8 ft) Falt Bottom: 6,735 mm (22.1 ft)
Height
Max. Cutting: 9,255 mm (30.4 ft) | Max. Dumping: 6,383 mm (20.9 ft) | Cab: 2,939 mm (9.6 ft)
Overall Length
Overall Length with 3,050 mm (10 ft) Arm: 9,739 mm (32.0 ft)
Overall Height
Overall Height with 3,050 mm (10ft) Arm: 3,135 mm (10.3 ft)
Ground Clearance
Counterweight Clearance: 1,065 mm (3.5 ft)
Width
Upperstructure: 2,700 mm (8.9 ft) | Gauge: 2,380 mm (7.8 ft)
Overall Width
Triple Semi-Grouser 500 mm (20 in) Shoes: 2,980 mm (9.8 ft)
Capacities
Drawbar Capacity
Pull: 17,400 kg (38,360 lb)
Fuel Capacity
Fuel Tank: 340 L (90 gal)
Cooling System
30 L (8 gal)
Oil capacity
Engine: 21.5 L (6 gal)
Hydraulic Capacity
System: 266 L (70 gal) | Tank: 246 L (65 gal)
Features
Swing Mechanism: 3.4 L (0.9 gal) | Final Drive Case (each): 5.4 L (1.4 gal)
Weights
Weight
Base: 20,600 kg (45,415 lb) | Triple Semi Grouser 700mm (28 in) Shoes: 6,822 kg (15,040 lb) | One-Piece Boom: 1,679 kg (3,702 lb) | 3,050 mm (10 ft): 705 kg (1,554 lb) Boom Lift Cylinders (2), Total: 428 kg (944 lb) 1.0 m3 (1.3 cu. Yd) Bucket: 688 kg (1,517 lb) Counterweight, Standard: 4,450(9,811) | Lift Over End at 15' Radius, Ground Level: 7,323 kg (16,144 lb) | Lift Over End at 20' Radius, Ground Level: 5,368 kg (11,834 lb) | Lift Over Side at 15' Radius, Ground Level: : 4,526 kg (9,978 lb) | Lift Over Side at 20' Radius, Ground Level: 3,486 kg (7,685 lb)
Weight, In Running Order
With full fuel tank; 79 kg (175lb) operator; 1.0 m3 (1.3 cu. Yd), 688 kg (1517 lb) general purpose bucket; 700 mm (28 in) shoes; and 3,050 mm (10 ft) arm
Features
Features
Control: Pilot levers, low-effort hydraulic controls with horn and boost bottons | Carrier Rollers (each side): 2 | Track Rollers (each side): 7 | Shoes (each side) Triple Semi-Grousers: 42
Track Type
Adjustment: Hydraulic | Guides: Front Idler | Chain: Sealed and lubricated