2020 Rhino Equipment Excavators REX330
- Year 2020
- Make Rhino Equipment
- Model Excavators
- Engine Cummins Model: 6CTA8
2020 Rhino Equipment Excavators REX330
The Rhino® excavator is the solution to meet today´s requirements in high performance, maximum uptime, and low cost operation. Designed to keep you competitive, these excavators let you finish the job faster and put more profit in your pocket.
Industry leading fuel efficiency, ergonomic work environment, more comfortable for the operator. New cab design creates a safer work environment. Environmentally friendly – low emission levels, low noise, and more than 95% of the machine is recyclable.
Features may include:
- This Rhino excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A high-efficiency “on-demand” cooling system, advanced multifunction monitor, and productivity modes to allow you to choose your digging style headline the long list of advances.
- Ergonomically correct short-throw pilot levers provide smooth, predictable fingertip control with less movement or effort.
- With large idlers, rollers, and strutted links, the sealed and lubricated undercarriage delivers long and reliable performance.
- Generous flow, and swing torque help speed cycles. So you can do your best to stay on schedule or ahead of the weather. Rhino® excavators come standard with the hydraulic line for attachments. Attachments include hydraulic hammers, thumb cutters, and many more.
Engine
Engine Manufacturer
Cummins or Rhino®
Engine
Cummins Model: 6CTA8
Emissions
Rating: Tier 2
Cylinder Liners
6
Displacement
8.3 L (506 cu. In)
Engine Power
Net Power 188 kw (252 hp)@ 2,200 rpm
Ignition
Fuel System: Direct Injection
Aspiration
Turbocharged, air-to-air charge air cooler
Bore
Boom (2): 140 mm (5.5 in) | Arm (1): 170 mm (6.7 in) | Bucket (1): 140 mm (5.5 in)
Stroke
Boom (2): 1,610 mm (63.4 in) | Arm (1): 1,820 mm (71.7 in) | Bucket (1): 1,610 mm (63.4 in)
Engine Torque
79,670 Nm (58,762 lb-ft)
Drivetrain
Drive System
Power Train: Dual speed mode for tracks on-dash one-button activation
Operational
Operating Speed
Maximum Travel Speeds Low: 3 kph (2 mph) | Maximum Travel Speeds High: 5 kph (3 mph) | Swing Mechanism: 10.6 rpm
Ground Pressure
Triple Semi-Grouser (500mm) (20 in) Shoes: 61 Kpa (8.8 psi)
Operating Conditions
Arm Digging Force: 128 kN (28,776 lb) | Bucket Digging Force: 248 kN (55,753 lb)
Hydraulics
Hydraulic Type
System: Open center, load sensing; two variable-displacement axial-piston pumps
Maximum Pressure
34 Mpa (4,975 psi) | Power Boost Mpa (psi): 35(5,076)
Hydraulic Flow
Max. Flow L/min (gpm) (each): 265 (70)
Dimensions
Track Width
600 mm (23.6 ft)
Dimensions
Max. Reach: 11,100 mm (36.4 ft) | Max. Reach at Ground Level: 10,910 mm (35.8 ft) | Max. Vertical Wall: 6,380 mm (20.9 ft) | Min. Swing Radius: 4,265 mm (14.0 ft) | Tail Swing Radius: 3,418 mm (11.2 ft) | Swing Radius: 3,418 mm (11.2 ft) | Rod Diameter Boom (2): 100 mm (3.9 in) | Rod Diameter Arm (1): 120 mm (4.5 in) | Rod Diameter Bucket (1): 100 mm (3.9 in)
Length
Arm: 3,185 mm (10.4 ft) | Track on Ground: 3,700 mm (12.1 ft) | Undercarriage: 4,622 mm (15.2 ft)
Depth, Maximum
Max. Digging Depth: 7,370 mm (24.2 ft) | Max. Digging Depth at 2,440 mm (8 ft) Falt Bottom: 6,535 mm (21.4 ft)
Height
Max. Cutting: 10,200 mm (33.5 ft) | Max. Dumping: 7,135 mm (23.4 ft) | Cab: 3,278 mm (10.8 ft)
Overall Length
Overall Length with 3,050 mm (10 ft) Arm: 11,080 mm (36.4 ft)
Overall Height
Overall Height with 3,050 mm (10ft) Arm: 3,180 mm (10.4 ft)
Ground Clearance
Counterweight Clearance: 1,208 mm (4.0 ft)
Width
Upperstructure: 2,995 mm (9.8 ft) | Gauge: 2,390 mm (7.8 ft)
Overall Width
Triple Semi-Grouser 600 mm (24 in) Shoes: 3,190 mm (10.5 ft)
Capacities
Fuel Capacity
Fuel Tank: 400 L (106 gal)
Cooling System
20.6 L (5 gal)
Oil capacity
Engine: 23 L (6 gal)
Hydraulic Capacity
Tank: 132 L (35 gal)
Features
Swing Mechanism: 8.2 L (2.2 gal) | Final Drive Case (each): 8.5 L (2.2 gal)
Weights
Weight
Base: 33,000 kg (72,753 lb) | Lift Over End at 25' Radius, Ground Level: 8,475 kg (18,684 lb) | Lift Over End at 20' Radius, Ground Level: 11,525 kg (25,408 lb) | Lift Over Side at 25' Radius, Ground Level: : 8,475 kg (18,684 lb) | Lift Over Side at 20' Radius, Ground Level: 7,158 kg (15,781 lb)
Weight, In Running Order
With full fuel tank; 79 kg (175lb) operator; 1.45 m3 (1.9 cu. Yd) general purpose bucket; 600 mm (27 in) shoes; and 3,185 mm (10 ft) arm
Features
Features
Control: Pilot levers, low-effort hydraulic controls with horn and boost bottons | Carrier Rollers (each side): 2 | Track Rollers (each side): 7 | Shoes (each side) Triple Semi-Grousers: 45
Track Type
Adjustment: Hydraulic | Guides: Front Idler | Chain: Sealed and lubricated