2020 Rhino Equipment Excavators REX35
- Year 2020
- Make Rhino Equipment
- Model Excavators
2020 Rhino Equipment Excavators REX35
The Rhino® excavator is the solution to meet today´s requirements in high performance, maximum uptime, and low cost operation. Designed to keep you competitive, these excavators let you finish the job faster and put more profit in your pocket.
Industry leading fuel efficiency, ergonomic work environment, more comfortable for the operator. New cab design creates a safer work environment. Environmentally friendly – low emission levels, low noise, and more than 95% of the machine is recyclable.
Features may include:
- This Rhino® excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A high-efficiency “on-demand” cooling system, advanced multifunction monitor, and productivity modes to allow you to choose your digging style headline the long list of advances.
- Ergonomically correct short-throw pilot levers provide smooth, predictable fingertip control with less movement or effort.
- The standard rubber track lets you work on multiple surfaces such as grass, pavement or stone without damaging the surface or machine.
- Generous flow, and swing torque help speed cycles. So you can do your best to stay on schedule or ahead of the weather. Rhino® excavators come standard with the hydraulic line for attachments. Attachments include hydraulic hammers, thumb cutters, and many more.
Engine
Engine Manufacturer
Rhino®
Emissions
Rating: Tier 3
Cylinder Liners
4
Displacement
2.2 L (134 cu. In)
Engine Power
Net Power 25 kw (34 hp)@ 2,200 rpm
Ignition
Fuel System: Direct Injection
Aspiration
Naturally Aspirated
Bore
Boom (2): 75 mm (3.0 in) | Arm (1): 75 mm (3.0 in) | Bucket (1): 70 mm (2.8 in)
Stroke
Boom (2): 550 mm (21.7 in) | Arm (1): 605 mm (23.8 in) | Bucket (1): 510 mm (20.1 in)
Drivetrain
Drive System
Power Train: Dual speed mode for tracks on-dash one-button activation
Operational
Operating Speed
Maximum Travel Speeds Low: 2.7 kph (1.7 mph) | Maximum Travel Speeds High: 4.0 kph (2.5 mph) | Swing Mechanism: 12 rpm
Ground Pressure
Rubber Track (350mm 13.8 in): 36 Kpa (5.2 psi)
Operating Conditions
Arm Digging Force: 19 kN (4,159 lb) | Bucket Digging Force: 23.7 kN (5,328 lb)
Hydraulics
Hydraulic Type
System: Open center, load sensing; two variable-displacement axial-piston pumps
Maximum Pressure
Pressure: 24.5 Mpa (3,553 psi) | Power Boost Mpa (psi): 25(3,553)
Hydraulic Flow
Max. Flow L/min (gpm) (each): 46(12)
Dimensions
Track Width
350 mm (13.8 ft)
Dimensions
Max. Reach: 5,530 mm (18.1 ft) | Max. Reach at Ground Level: 5,420 mm (17.8 ft) | Min. Swing Radius: 2,185 mm (7.2 ft) | Swing Radius: 1,600 mm (5.2 ft) | Rod Diameter Boom (2): 40 mm (1.6 in) | Rod Diameter Arm (1): 45 mm (1.8 in) | Rod Diameter Bucket (1): 40 mm (1.6 in)
Length
Arm: 1,450 mm (4.8 ft) | Track on Ground: 1,710 mm (5.6 ft) | Undercarriage: 2,190 mm (7.2 ft)
Depth, Maximum
Max. Digging Depth: 3,076 mm (10.1 ft)
Height
Max. Cutting: 5,030 mm (16.5 ft) | Max. Dumping: 3,410 mm (11.2 ft)
Overall Length
5,500 mm (18.0 ft) | Transport: 3,353 mm (11.0 ft)
Overall Height
1,861 mm (6.1 ft) | Top of Cab: 2,455 mm (8.1 ft)
Ground Clearance
Min. 350 mm (13.8 in) | Counterweight Clearance: 585 mm (1.9 ft)
Width
Upperstructure: 1,640 mm (5.4 ft) | Undercarriage: 1,750 mm (5.7 ft)
Capacities
Fuel Capacity
Fuel Tank: 82 L (22 gal)
Cooling System
5 L (1 gal)
Oil capacity
Engine: 7.4 L (2 gal)
Hydraulic Capacity
Tank: 90 L (24 gal)
Weights
Weight
Base: 4,200 kg (9,259 lb)
Weight, In Running Order
With full fuel tank; 79 kg (175lb) operator; 0.17 m3 (0.22 cu. Yd) general purpose bucket; 350 mm (13.8 in) tracks; and 1,450 mm (4.8 ft) arm
Features
Features
Control: 2 pilot levers, low-effort hydraulic controls with horn and boost bottons | Carrier Rollers (each side): 1 | Track Rollers (each side): 4 | Shoes (each side) Triple Semi-Grousers: 350(13.8)
Track Type
Adjustment: Hydraulic | Guides: Front Idler | Chain: Sealed and lubricated