2020 Rhino Equipment Excavators REX450
- Year 2020
- Make Rhino Equipment
- Model Excavators
- Engine Cummins Model: QSM11
2020 Rhino Equipment Excavators REX450
The Rhino® excavator is the solution to meet today´s requirements in high performance, maximum uptime, and low cost operation. Designed to keep you competitive, these excavators let you finish the job faster and put more profit in your pocket.
Industry leading fuel efficiency, ergonomic work environment, more comfortable for the operator. New cab design creates a safer work environment. Environmentally friendly – low emission levels, low noise, and more than 95% of the machine is recyclable.
Features may include:
- This Rhino excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A high-efficiency “on-demand” cooling system, advanced multifunction monitor, and productivity modes to allow you to choose your digging style headline the long list of advances.
- Ergonomically correct short-throw pilot levers provide smooth, predictable fingertip control with less movement or effort.
- With large idlers, rollers, and strutted links, the sealed and lubricated undercarriage delivers long and reliable performance.
- Generous flow, and swing torque help speed cycles. So you can do your best to stay on schedule or ahead of the weather. Rhino® excavators come standard with the hydraulic line for attachments. Attachments include hydraulic hammers, thumb cutters, and many more.
Engine
Engine Manufacturer
Cummins or Rhino®
Engine
Cummins Model: QSM11
Emissions
Rating: Tier3
Cylinder Liners
6
Displacement
11 L (671 cu. In)
Engine Power
Net Power 251 kw (337 hp)@ 2,200 rpm
Ignition
Fuel System: Direct Injection
Aspiration
Turbocharged, air cooler
Bore
Boom (2): 150 mm (5.9 in) | Arm (1): 185 mm (7.3 in) | Bucket (1): 160 mm (6.3 in)
Stroke
Boom (2): 1,590 mm (62.6 in) | Arm (1): 1,800 mm (70.9 in) | Bucket (1): 1,270 mm (50.0 in)
Engine Torque
152,600 Nm (112,552 lb-ft)
Drivetrain
Drive System
Power Train: Dual speed mode for tracks on-dash one-button activation
Operational
Operating Speed
Maximum Travel Speeds Low: 3 kph (2 mph) | Maximum Travel Speeds High: 5.5 kph (3.4 mph) | Swing Mechanism: 9.0 rpm
Ground Pressure
Triple Semi-Grouser (700mm) (28 in) Shoes: 72 Kpa (10.4 psi)
Operating Conditions
Arm Digging Force: 20,100 kN (45.187 lb) | Bucket Digging Force: 25,000 kN (56,202 lb)
Hydraulics
Hydraulic Type
System: Open center, load sensing; two variable-displacement axial-piston pumps
Maximum Pressure
34 Mpa (4,975 psi) | Power Boost Mpa (psi): 35(5,076)
Hydraulic Flow
Max. Flow L/min (gpm) (each): 360 (95)
Dimensions
Track Width
700 mm (27.6 ft)
Dimensions
Max. Reach: 12,025 mm (39.5 ft) | Max. Reach at Ground Level: 11,815 mm (38.8 ft) | Max. Vertical Wall: 6,800 mm (22.3 ft) | Tail Swing Radius: 3,645 mm (12.0 ft) | Swing Radius: 3,645 mm (12.0 ft) | Rod Diameter Boom (2): 115 mm (4.5 in) | Rod Diameter Arm (1): 130 mm (5.1 in) | Rod Diameter Bucket (1): 120 mm (4.7 in)
Length
Arm: 3,380 mm (11.1 ft) | Track on Ground: 4,020 mm (13.2 ft) | Undercarriage: 4,360 mm (14.3 ft)
Depth, Maximum
Max. Digging Depth: 7,810 mm (35.8 ft) | Max. Digging Depth at 2,440 mm (8 ft) Falt Bottom: 7,500 mm (24.6 ft)
Height
Max. Cutting: 10,910 mm (33.5 ft) | Max. Dumping: 7,550 mm (24.8 ft) | Cab: 3,280 mm (10.8 ft)
Overall Length
Overall Length with 3,050 mm (10 ft) Arm: 11,980 mm (39.3 ft)
Overall Height
Overall Height with 3,050 mm (10ft) Arm: 3,640 mm (11.9 ft)
Ground Clearance
Counterweight Clearance: 2,355 mm (7.7 ft)
Width
Upperstructure: 3,045 mm (10.0 ft) | Gauge: 2,890 mm (9.5 ft)
Overall Width
Triple Semi-Grouser 600 mm (24 in) Shoes: 3,490 mm (11.5 ft)
Capacities
Fuel Capacity
Fuel Tank: 650 L (172 gal)
Cooling System
36.8 L (10 gal)
Oil capacity
Engine: 38 L (10 gal)
Hydraulic Capacity
Tank: 335 L (88 gal)
Features
Swing Mechanism: 16.2 L (4.3 gal) | Final Drive Case (each): 12.0 L (3.2 gal)
Weights
Weight
Base: 45,800 kg (100,972 lb) | Lift Over End at 25' Radius, Ground Level: 14,820 kg (32,673 lb) | Lift Over End at 20' Radius, Ground Level: 19,165 kg (42,252 lb) | Lift Over Side at 25' Radius, Ground Level: : 14,820 kg (32,673 lb) | Lift Over Side at 20' Radius, Ground Level: 12,860 kg (28,351 lb)
Weight, In Running Order
With full fuel tank; 79 kg (175lb) operator; 1.6 m3 (2.1 cu. Yd), general purpose bucket; 600 mm (27 in) shoes; and 3,185 mm (10 ft) arm
Features
Features
Control: Pilot levers, low-effort hydraulic controls with horn and boost bottons | Carrier Rollers (each side): 2 | Track Rollers (each side): 8 | Shoes (each side) Triple Semi-Grousers: 48
Track Type
Adjustment: Hydraulic | Guides: Front Idler | Chain: Sealed and lubricated