Current Rhino Equipment Equipment Track-Loaders

2020 Rhino Equipment Trackloaders RTL24

2020 Rhino Equipment Trackloaders RTL24

Swipe to View More

  • Year 2020
  • Make Rhino Equipment
  • Model Trackloaders
  • Engine Cummins Model: NT855
Shop Rhino Equipment Pre-Owned
Product Details Specifications Photos
2020 Rhino Equipment Trackloaders RTL24

2020 Rhino Equipment Trackloaders RTL24

  • Year 2020
  • Manufacturer Rhino Equipment
  • Model Name Trackloaders
  • Trim Name RTL24
  • Generic Type (Primary) Shiphold/Port Handling
  • Engine Manufacturer Cummins | Rhino®
  • Engine Cummins Model: NT855
  • Emissions Tier 2
  • Cylinder Liners 6
  • Displacement 14 L (854 cu. In)
  • Engine Power Net Power 164 kW (220 Hp) @ 2,000 rpm
  • Engine Torque Net Peak Torque 950 Nm (701 lb-ft) @ 1,400 rpm
  • Aspiration Turbocharged, charge air cooled
  • Air Cleaner Under-hood, dual element dry type, restriction indicator on filter housing for service

2020 Rhino Equipment Trackloaders RTL24

Designed to be productive, this machine will give you complete satisfaction in a wide range of tough applications in the most efficient and productive way. Its design also delivers strength and durability with excellent control and unmatched ease of operation.

Offers better fuel efficiency and reduced wear. It works at the point of combustion to optimize engine performance and provide low exhaust emissions.

Specific arrangements are available to extend machine capability to work under severe environmental conditions such as sanitary landfill, recycling site, demolition site, steel mill or soft ground conditions.

Features may include:

  • The RTL series allows you to work hard and efficiently in all conditions. Repeatable fine modulation gives superior bucket control for excellent material handling. RTL Series hydraulic low effort controls allow for quick cycle times in order to increase productivity.
  • Large, spacious cab and low-effort and ergonomic controls provide the operator a convenient and comfortable working area.
  • Easy-to-read, high-visibility gauges and warning lamps keep the operator aware of critical system information.
  • The Rhino track loaders is available with several shoes options to best match to the job conditions. Any details count, and a single track shoe can make the difference.

Engine

Engine Manufacturer Cummins | Rhino®
Engine Cummins Model: NT855
Emissions Tier 2
Cylinder Liners 6
Displacement 14 L (854 cu. In)
Engine Power Net Power 164 kW (220 Hp) @ 2,000 rpm
Engine Torque Net Peak Torque 950 Nm (701 lb-ft) @ 1,400 rpm
Aspiration Turbocharged, charge air cooled
Air Cleaner Under-hood, dual element dry type, restriction indicator on filter housing for service

Fuel System

Fuel System Direct Injection

Drivetrain

Transmission Type: Powershift, planetary gear and multiple disc clutch
Steering Individual levers to control each track
Final Drive Double reduction final drives mounted enclosed and isolated

Electric

Electrical 24 Volts
Alternator Rating: 50A

Brakes

Brake System Type Dynamic braking when decelerator pedal is actuated
Parking Brake Manually activated

Operational

Operating Speed Maximum Travel Speeds 1st Gear Forward: 3.5 km/h (2.2 mph) | Maximum Travel Speeds 1st Gear Reverse: 4.4 km/h (2.7 mph) | Maximum Travel Speeds 2nd Gear Forward: 6.5 km/h (4.0 mph) | Maximum Travel Speeds 2nd Gear Reverse: 7.5 km/h (4.7 mph) | Maximum Travel Speeds 3nd Gear Forward: 9.7 km/h (6.0 mph) | Maximum Travel Speeds 3nd Gear Reverse: 13.2 km/h (8.2 mph) | At 2.0 km/h (1.2 mph): 170(38,218) | At 6.0 km/h (3.7 mph): 50(11,240)
Operating Conditions Drawbar Pull Maximum: 270 kN (60,698 lb) | Operator Station: ROPS and FOPS
Ground Pressure 0.07 Mpa (10.2 psi)

Hydraulics

Maximum Pressure System: 2 Mpa (290 psi) | 14 Mpa (2,031 psi)
Hydraulic Type Gear pump
Hydraulic Flow Max. Flow L/min (gpm): 262 (69)

Lights and Safety

Lighting 2 Front lights, 2 Rear lights

Dimensions

Gauges Track: 1,880 mm (74.0 in)
Width Grouser: 560 mm (22.0 in) | Bucket: 2,685 mm (8.8 ft)
Length Track on Ground: 3,168 mm (124.7 in)
Dimensions Ground Contact Area: 35,504 cm2 (5,503 sq.in) | Reach at 45 deg.: 1,315 mm (4.3 ft)
Overall Height Top of Exhaust: 3,440 mm (11.3 ft)
Height Top of Cab: 3,402 mm (11.2 ft) | Dumping at 45 deg: 2,840 mm (9.3 ft) | Max. Operating: 5,370 mm (17.6 ft) | Max. to Hinge Pin: 3,830 mm (12.6 ft)
Depth, Maximum Tread Depth with Single-Bar Grouser: 60 mm (2.4 in) | Max. Digging Depth: 135 mm (5.3 in)
Ground Clearance Dirt: 404 mm (15.9 in)
Overall Length 7,050 mm (23.1 in)

Capacities

Fuel Capacity Tank: 450 L (119 gal)
Cooling System 118 L (31 gal)
Oil capacity Engine: 20 L (5 gal)
Transmission Fluid Volume 150 L (40 gal)
Hydraulic Capacity Tank: 100 L (26 gal)
Features Steering: 70 L (18 gal) | Final Drive Case (for both): 40 L (11 gal)
Cargo Capacity Bucket: 2.3 m3 (3.0 cu. Yd)

Weights

Weight Base: 23,340 kg(51,456 lb) | With 3-Shank Ripper: 27,240 kg(60,054 lb)

Features

Features Fan drive: Belt driven | Shoes, Each Side: 38 | Track Rollers, Each Side: 6
Chain Type Sealed and lubricated
Track Pitch 216 mm (8.5 in)

Product Photography