2020 Rhino Equipment Trackloaders RTL36

2020 Rhino Equipment Trackloaders RTL36

Swipe to View More

  • Year 2020
  • Make Rhino Equipment
  • Model Trackloaders
  • Engine Cummins Model: NTA855
2020 Rhino Equipment Trackloaders RTL36

2020 Rhino Equipment Trackloaders RTL36

2020 Rhino Equipment Trackloaders RTL36

Designed to be productive, this machine will give you complete satisfaction in a wide range of tough applications in the most efficient and productive way. Its design also delivers strength and durability with excellent control and unmatched ease of operation.

Offers better fuel efficiency and reduced wear. It works at the point of combustion to optimize engine performance and provide low exhaust emissions.

Specific arrangements are available to extend machine capability to work under severe environmental conditions such as sanitary landfill, recycling site, demolition site, steel mill or soft ground conditions.

Features may include:

  • The RTL series allows you to work hard and efficiently in all conditions. Repeatable fine modulation gives superior bucket control for excellent material handling. RTL Series hydraulic low effort controls allow for quick cycle times in order to increase productivity.
  • Large, spacious cab and low-effort and ergonomic controls provide the operator a convenient and comfortable working area.
  • Easy-to-read, high-visibility gauges and warning lamps keep the operator aware of critical system information.
  • The Rhino track loaders is available with several shoes options to best match to the job conditions. Any details count, and a single track shoe can make the difference.

Engine

Engine Manufacturer Cummins | Rhino®
Engine Cummins Model: NTA855
Emissions Tier 2
Cylinder Liners 6
Displacement 14 L (854 cu. In)
Engine Power Net Power 257 kW (345 Hp) @ 2,000 rpm
Engine Torque Net Peak Torque 1,423 Nm (1,050 lb-ft) @ 1,400 rpm
Aspiration Turbocharged, charge air cooled
Air Cleaner Under-hood, dual element dry type, restriction indicator on filter housing for service

Fuel System

Fuel System Direct Injection

Drivetrain

Transmission Type: Powershift, planetary gear and multiple disc clutch
Steering Individual levers to control each track
Final Drive Double reduction final drives mounted enclosed and isolated

Electric

Electrical 24 Volts
Alternator Rating: 50A

Brakes

Brake System Type Dynamic braking when decelerator pedal is actuated
Parking Brake Manually activated

Operational

Operating Speed Maximum Travel Speeds 1st Gear Forward: 3.5 km/h (2.2 mph) | Maximum Travel Speeds 1st Gear Reverse: 4.4 km/h (2.7 mph) | Maximum Travel Speeds 2nd Gear Forward: 6.5 km/h (4.0 mph) | Maximum Travel Speeds 2nd Gear Reverse: 7.5 km/h (4.7 mph) | Maximum Travel Speeds 3nd Gear Forward: 11.5 km/h (7.1 mph) | Maximum Travel Speeds 3nd Gear Reverse: 13.5 km/h (8.4 mph) | At 2.0 km/h (1.2 mph): 170(38,218) | At 6.0 km/h (3.7 mph): 50(11,240)
Operating Conditions Drawbar Pull Maximum: 360 kN (80,931 lb) | Operator Station: ROPS and FOPS
Ground Pressure 0.11 Mpa (16.09 psi)

Hydraulics

Maximum Pressure System: 2 Mpa (290 psi) | 14 Mpa (2,031 psi)
Hydraulic Type Gear pump
Hydraulic Flow Max. Flow L/min (gpm): 355 (94)

Lights and Safety

Lighting 2 Front lights, 2 Rear lights

Dimensions

Gauges Track: 2,140 mm (84.3 in)
Width Grouser: 560 mm (22.0 in) | Bucket: 3,100 mm (10.2 ft)
Length Track on Ground: 3,160 mm (124.4 in)
Dimensions Ground Contact Area: 35,392 cm2 (5,486 sq.in) | Reach at 45 deg.: 1,398 mm (4.6 ft)
Overall Height Top of Exhaust: 3,440 mm (11.3 ft)
Height Top of Cab: 3,640 mm (11.9 ft) | Top Exhaust Stack: 2,680 mm (8.8 ft) | Dumping at 45 deg.: 3,060 mm (10.0 ft) | Max. Operating: 5,540 mm (18.2 ft) | Max. to Hinge Pin: 4,123 mm (13.5 ft)
Depth, Maximum Tread Depth with Single-Bar Grouser: 80 mm (3.1 in) | Max. Digging Depth: 145 mm (5.7 in)
Ground Clearance Dirt: 404 mm (15.9 in)
Overall Length 6,880 mm (22.6 in)

Capacities

Fuel Capacity Tank: 600 L (159 gal)
Cooling System 121 L (32 gal)
Oil capacity Engine: 20 L (5 gal)
Transmission Fluid Volume 185 L (49 gal)
Hydraulic Capacity Tank: 164 L (43 gal)
Features Final Drive Case (for both): 136 L (36 gal)
Cargo Capacity Bucket: 3.7 m3 (4.8 cu. Yd)

Weights

Weight Base: 35,750 kg(78,815 lb) | With 3-Shank Ripper: 40,946 kg(90,270 lb)

Features

Features Fan drive: Belt driven | Shoes, Each Side: 41 | Track Rollers, Each Side: 7 | Control: Lever control for blade with float mode; lever control for ripper
Chain Type Sealed and lubricated
Track Pitch 229 mm (9.0 in)

Product Photography