2020 Rhino Equipment Wheel Dozers RWD235

2020 Rhino Equipment Wheel Dozers RWD235

Swipe to View More

  • Year 2020
  • Make Rhino Equipment
  • Model Wheel Dozers
  • Engine Cummins Model: M11
2020 Rhino Equipment Wheel Dozers RWD235

2020 Rhino Equipment Wheel Dozers RWD235

2020 Rhino Equipment Wheel Dozers RWD235

Wheel Dozers are specifically designed for mobility, maneuverability and good speed. Wheel dozers can travel at speeds of up to three times faster than track-type tractors.

Built and designed for demanding work, the Rhino® wheel dozer line gives customer's flexibility on the jobsite with the ability to perform a variety of tasks.

These outstanding utility machines are engineered for demanding work and are an excellent choice for applications including surface mining, cleanup, stock piles, road maintenance, reclamation and jobs where travel is required between multiple sites

Features may include:

  • If you`ve got maximum productivity in mind, the Rhino® wheel dozers should be at the top of your list. But it`s not just their big torque reserves thet make them such impressive performers. Joystick control provide smooth, near-effortless control. Rhino® hydraulics sense the load and deliver the flow needed for smooth combined functions and fast work cycles.
  • Control panel provides access to critical machine info, brake and throttle pedals are conveniently positioned for maximum comfort to the operator.
  • Rhino® cylinders offer superior strength and dent resistance deliver longer component life and reduced risk of system contamination. Rhino® Cylinders and Rods are designed to allow for a variety of service / repair options.
  • High quality hose products mean fewer hose changes. Rhino® Equipment offers a broad line of high, medium and low-pressure hoses and couplings that are engineered and tested far beyond industry standards for top performance and long life.

Engine

Engine Manufacturer Cummins | Rhino®
Engine Cummins Model: M11
Emissions Tier2
Cylinder Liners 6
Displacement 11 L (671 cu in)
Engine Power Net Power 216 kW (290 hp) @ Rated 2,200 rpm
Engine Torque Net Peak Torque 1,329 Nm (980 lb-ft) @ Rated 1,500 rpm
Lubrication Full-flow spin-on filter
Aspiration Turbocharged, charge air cooled
Air Cleaner Under-hood, dual element dry type, restriction indicator on filter housing for service

Fuel System

Fuel System Direct Injection

Drivetrain

Transmission Powershift | Torque Converter: Single-stage, Dual-phase, Quad-element torque | Operator Interface: Steering column lever for two gears forward and one in reverse | Shift Modes: Manual activation (Forward: 1st and 2nd; Reverse: 1st)
Final Drive Heavy duty inboard-mounted planetary
Differential Lock Helical bevel gear
Steering Articulated frame, fully hydraulic | Articulation Angle: 35 degrees

Brakes

Brake System Type Pneumatically assisted, hydraulically actuaded, four wheels disk brake
Parking Brake Manually activated, drum mounted on front output shaft

Battery

Battery 2-12 volt: 120A

Electric

Electrical System: 24 Volts
Alternator System: 70 Amp

Operational

Operating Speed Maximum Travel Speeds 1st Gear Forward: 7 km/h (5 mph) | Maximum Travel Speeds 1st Gear Reverse: 12 km/h (8 mph) | Maximum Travel Speeds 2nd Gear Forward: 26 km/h (16 mph)
Operating Conditions Rear Axel Oscillation (with 26.5 R 25 20 tires): 24 degrees (12 degrees each direction)

Hydraulics

Hydraulic Pump Loader and Steering: Gear Pump, variable displacement, closed-center
Hydraulic Flow Max. Rated Flow at 2,200 rpm: 210 L/min (55 gpm)
Relief Valve Setting System Relief Pressure (Loader and Steering): 21 Mpa (3,046 psi)
Hydraulic Type Loader Controls: Dual-multiway valve, joystick control

Dimensions

Turning Radius Measured to centerline of outside tire: 6,487 mm (21.3 ft)
Height Top of Cab and Canopy: 3,730 mm (12.2 ft) | Hood: 3,500 mm (11.5 ft) | Straight Blade: 1,345 mm (4.4 ft) | Universal Blade: 1,467 mm (4.8 ft)
Ground Clearance 496 mm (1.6 ft)
Wheelbase 3,400 mm (11.2 ft)
Overall Length Blade on Ground: 8,280 mm (27.2 ft)
Overall Width Straight Blade: 3,266 mm (10.7 ft) | Universal Blade: 3,065 mm (10.1 ft)
Depth, Maximum Straight Blade Digging : 400 mm (1.3 ft) | Universal Blade Digging : 450 mm (1.5 ft)
Dimensions Max. Lift Above Ground: 980 mm (3.2 ft) | Straight Blade Max. Tilt: 1,100 mm (3.6 ft) | Max. Lift Above Ground: 910 mm (3.0 ft) | Universal Blade Max. Tilt: 1,070 mm (3.5 ft)

Capacities

Fuel Capacity Tank: 425 L (112 gal)
Cooling System 30 L (8 gal)
Oil capacity Engine: 32 L (8 gal)
Transmission Fluid Volume 38 L (10 gal)
Axle Capacity, Rear Oil (each): 70 L (18 gal)
Axle Capacity, Front Oil (each): 70 L (18 gal)
Hydraulic Capacity Tank: 300 L (79 gal)
Features Brake System (Front and Rear Booster Pump, each): 2.0 L (0.5 gal)
Cargo Capacity Straight Blade: 4.5 m3 (5.9 cu. Yd) | Universal Blade: 6.2 m3 (8.1 cu. Yd)

Weights

Weight Straight Blade: 3,200 kg (7,055 lb)
Weight, In Running Order 26,000 kg (57,320 lb)

Features

Features Fan Drive: Hydraulic driven

Product Photography