2020 Rhino Equipment Wheel Dozers RWD315

2020 Rhino Equipment Wheel Dozers RWD315

Swipe to View More

  • Year 2020
  • Make Rhino Equipment
  • Model Wheel Dozers
  • Engine Cummins Model: M11
2020 Rhino Equipment Wheel Dozers RWD315

2020 Rhino Equipment Wheel Dozers RWD315

2020 Rhino Equipment Wheel Dozers RWD315

Rhino® Wheel Loaders are today’s solution to meet high performance requirments, have maximum uptime, and low cost operation. Designed to keep you competitive, these loaders let you finish the job faster and put more profit in your pocket.

The RWL series allows you to work hard and efficiently in all conditions. Repeatable fine modulation gives superior bucket control with less spillage. RWL Series electro-hydraulic implement controls and load-sensing hydraulic system with simultaneous lift and tilt capabilities offer better control with less effort.

Rhino® wheel loaders saves you money by keeping operating costs to a minimum – getting more work done per unit of fuel used.

Features may include:

  • If you`ve got maximum productivity in mind, the RWD Wheel Dozers should be at the top of your list. But it`s not just their big torque reserves thet make them such impressive performers. Joystick control provide smooth, near-effortless control. Rhino® hydraulics sense the load and deliver the flow needed for smooth combined functions and fast work cycles.
  • Control panel provides access to critical machine info, brake and throttle pedals are conveniently positioned for maximum comfort to the operator.
  • Rhino® cylinders offer superior strength and dent resistance deliver longer component life and reduced risk of system contamination. Rhino® Cylinders and Rods are designed to allow for a variety of service / repair options.
  • High quality hose products mean fewer hose changes. Rhino® Equipment offers a broad line of high, medium and low-pressure hoses and couplings that are engineered and tested far beyond industry standards for top performance and long life.

Engine

Engine Manufacturer Cummins | Rhino®
Engine Cummins Model: M11
Emissions Tier2
Cylinder Liners 6
Displacement 11 L (671 cu in)
Engine Power Net Power 250 kW (335 hp) @ Rated 2,200 rpm
Engine Torque Net Peak Torque 1,674 Nm (1,235 lb-ft) @ Rated 1,500 rpm | Torque Rise: 47%
Lubrication Full-flow spin-on filter
Aspiration Turbocharged, charge air cooled
Air Cleaner Under-hood, dual element dry type, restriction indicator on filter housing for service

Fuel System

Fuel System Direct Injection

Drivetrain

Transmission Powershift | Torque Converter: Single-stage, 3 phase, Quad-element torque| Operator Interface: Steering column lever for two gears forward and one in reverse | Shift Modes: Manual activation (Forward: 1st and 2nd; Reverse: 1st)
Final Drive Heavy duty inboard-mounted planetary
Differential Lock Helical bevel gear
Steering Articulated frame, fully hydraulic | Steering Articulation Angle: 40 degrees

Brakes

Brake System Type Pneumatically assisted, hydraulically actuaded, four wheels disk brake
Parking Brake Manually activated, drum mounted on front output shaft

Battery

Battery 2-12 volt: 120A

Electric

Electrical System: 24 Volts
Alternator System: 70 Amp

Operational

Operating Speed Maximum Travel Speeds 1st Gear Forward: 6.4 km/h (4.0 mph) | Maximum Travel Speeds 1st Gear Reverse: 6.4 km/h (4.0 mph) | Maximum Travel Speeds 2nd Gear Forward: 11.9 km/h (7.4 mph) | Maximum Travel Speeds 2nd Gear Reverse 11.9 km/h (7.4 mph) | Maximum Travel Speeds 3rd Gear Forward: 18.7 km/h (11.6 mph) | Maximum Travel Speeds 3rd Gear Reverse : 25.9 km/h (16.1 mph) | Maximum Travel Speeds 4rd Gear Forward: 37.0 km/h (23.0 mph)
Operating Conditions Rear Axel Oscillation (29.5-25 -22PR L-3): 24 degrees (12 degrees each direction)

Hydraulics

Hydraulic Pump Loader and Steering: Gear Pump, variable displacement, closed-center
Hydraulic Flow Max. Rated Flow at 1,920 rpm: 210 L/min (55 gpm)
Maximum Pressure System Relief Pressure (Loader): 26 Mpa (3,771 psi) | System Relief Pressure (Steering): 21 Mpa (3,046 psi)
Hydraulic Type Loader Controls: Dual-multiway valve, joystick control

Dimensions

Turning Radius Measured to centerline of outside tire6,614 mm (21.7 ft)
Height Top of Cab and Canopy: 3,832 mm (12.6 ft) | Hood: 3,720 mm (12.2 ft) | Straight Blade: 1,345 mm (4.4 ft) | Universal Blade: 1,290 mm (4.2 ft)
Ground Clearance 461 mm (1.5 ft)
Wheelbase 3,650 mm (12.0 ft)
Overall Length Blade on Ground: 8,280 mm (27.2 ft)
Overall Width Straight Blade: 4,570 mm (15.0 ft) | Universal Blade: 4,210 mm (13.8 ft)
Depth, Maximum Straight Blade Digging : 388 mm (1.3 ft) | Universal Blade Digging : 424 mm (1.4 ft)
Dimensions Max. Lift Above Ground: 1,020 mm (3.3 ft) | Straight Blade Max. Tilt: 1,145 mm (3.8 ft) | Max. Lift Above Ground: 1,010 mm (3.3 ft) | Universal Blade Max. Tilt: 1,120 mm (3.7 ft)

Capacities

Fuel Capacity Tank: 480 L (127 gal)
Cooling System 55 L (15 gal)
Oil capacity Engine: 32 L (8 gal)
Transmission Fluid Volume 43 L (11 gal)
Axle Capacity, Rear Oil (each): 51 L (13 gal)
Axle Capacity, Front Oil (each): 51 L (13 gal)
Hydraulic Capacity Tank: 260 L (69 gal)
Features Brake System (Front and Rear Booster Pump, each): 2.0 L (0.5 gal)
Cargo Capacity Straight Blade: 5.3 m3 (6.9 cu. Yd) | Universal Blade: 7.5 m3 (9.8 cu. Yd)

Weights

Weight Straight Blade: 3,320 kg (7,319 lb)
Weight, In Running Order 34,500 kg (76,059 lb)

Features

Features Fan Drive: Hydraulic driven

Product Photography